Content |
MoCo is a fully passive monitor controller that helps you to provide perfect control over the playback volume of your studio monitors.
\"Fully passive\" means that there are no active components involved, that could in any way alter the audio signal - keeping the maximum sound quality level for your studio monitors. MoCo provides two separate stereo inputs (one with balanced 1/4\" TRS connectors, one with both unbalanced RCA and unbalanced 1/8\" TRS connectors) and two separate stereo outputs (one with balanced XLR connectors, one with balanced / unbalanced 1/4\" TRS plus unbalanced 1/8\" TRS connectors). MoCo does not change your signals from unbalanced to balanced: what goes in, goes out!
Via one switch you can select the input signal and with separate buttons, each output can be enabled. Also there is a switch that changes the monitor signal to mono and you can mute the playback audio signal quickly at the touch of a button. A quick swap of the left and right audio signal channels is also possible. And of course, the stylish big knob in the center of MoCo controls the actual playback volume.
Features
- 2x mono balanced 1/4\" TRS input (input A)
- 2x mono unbalanced RCA input (input B)
- 1x stereo unbalanced 1/8\" mini jack input (input B)
- 2x mono balanced XLR output (output A)
- 2x mono balanced / unbalanced 1/4\" TRS output (output B)
- 1x stereo unbalanced 1/8\" mini jack output (output B)
- selected high quality potentiometer for passive volume control
- A/B input selection switch
- L/R switch to swap left & right audio channels
- independent A and B buttons to enable and disable the outputs
- mono downmix button (mixes left to right channel and right to left channel)
- mute button to mute output signal instantly
|
The Nano Patch+ really comes into its own when connected between your computer audio interface/soundcard master outputs and a pair of active (powered) monitor speakers. One of the benefits of passive volume attenuation is that you no longer have to control volumes with your softwareʼs master volume fader. Reducing levels from your software only reduces the audio bit depth. It is much more appropriate to keep your software masters at unity and attenuate the audio to your active monitors with a passive controller like the Nano Patch+. This way you can maintain maximum audio resolution and attenuate your monitoring volume with the confidence that the sonic integrity of your audio is not compromised.
No active circuitry, buffers, transistors, batteries, or power supply of any kind can interfere with the main passive output of the Nano Patch+. It simply delivers attenuated signal. Pure, simple transparent.
- Super compact 2 channel analog passive volume control
- Rotary volume attenuation control
- Mute button
- Completely transparent operation
- No power required
- 2 x combo inputs (balanced and unbalanced)
- 2 x TRS outputs (balanced and unbalanced)
- 1 x Mini jack I/O
- available in black and silver
- No signal conversion from unbalanced to balanced! |
Sold in pairs, each PreSonus ISPD-4 isolation pad can be divided into halves and configured in several ways so you can use them with virtually any near-field studio monitors. For small, vertically placed speakers, use half of an isolator per side or employ the full pad, whichever works best. Place two half-pads side-by-side to accommodate larger speakers or horizontal placement.
The speakers shown on the photographs are sold separetely. |
- All-passive volume control circuit
- Stereo and AUX inputs
- Dual outputs
- Additional mono output
- Balanced and unbalanced connection
- Integrated high quality headphone amplifier
- Mono, mute and PFL switches
- Stereo volume, AUX and headphone level controls
- Elegant design with solid wood side panels
- Built to last
The Palmer Monicon® L is a precise, analogue volume control that connects between a computer or audio interface and active monitor speakers. The switch is completely passive and distortion-free, the LED displays and built-in headphone amplifier are powered via the included power supply.
Symmetric combo sockets serve as stereo input. The Monicon® L’s AUX input features RCA sockets and a 3.5 mm stereo jack. The compact console offers outputs for two monitor pairs and a mono summed output via XLR sockets. The stereo or AUX input can be selected alternately, the two outputs individually and together. In addition to its large volume controller, the Monicon® L is also equipped with mono, mute and PFL switches, a 6.35 mm headphone output, and separate AUX and headphone controllers for convenient operation.
Product type
Other Studio and Recording Equipment
Channels
2
Inputs
2
Input connectors
3.5 mm TRS , RCA , XLR
Input type
balanced/unbalanced (depending on TS/TRS connection)
Max. input level
20 dBu
Input impedance
(balanced) 10k Ohm(s) , (unbalanced) 5k Ohm(s)
Outputs
3
Output connectors
XLR
Output type
balanced/unbalanced (depending on TS/TRS connection)
Max. output level
20 dBu
Output impedance
600 Ohm(s)
Frequency response
10 - 40000 Hz
THD
0.001 %
Max. attenuation
(Attenuator + Mute) 112 dB , (Attenuator) 85 dB
Controls
attenuation , input selector , mono , mute , output selector , PFL source
Cabinet material
sheet steel , wood
Cabinet surface
Powder coated
Width
218 mm
Height
77 mm
Depth
100 mm
Weight
1,14 kg | Features
- Double-walled design for maximum protection
- Installation via gooseneck on microphone stand
Specifications
- Total diameter: 15 cm
- Screen separation: 2.5 cm
- Gooseneck length: approx. 30 cm
Scope of delivery
Applications
- Studio recording
- Podcasting
- Live performances and touring
|
Product details
MonkeyTree is the natural home for our species. The
Monkeys feel well while standing relaxed and decoupled
from the ground.
Our Monkeys love Heavy Metal - thats why we made the
Monkey Tree out of massive Material to guarantee a solid
stand.
One set contents 1 Pair of MonkeyTree
Weight: 12,1kgs / 26.7lb
Max. Load: 70kgs / 154lb
Dimensions (Plate): L240 x W165 x H793 mm
L9.44 x W6.5 x H31.22 in
The MonkeyTree is available with two different pipe-lengths. Please select between 750mm (29.53in) and 1000mm (39.37in)!
The MonkeyTree fits to Turbo 4, Turbo 5, Turbo 6 and Turbo 8.
|
Reviews
There are no reviews yet.