Content |
Frequency Response: C: 55 Hz - 35 KHz L/R: 85Hz - 35KHz Sensitivity (1W@1m): C: 90 dB L/R: 87dB Nominal Impedance: C: 8 Ohms L/R: 8 Ohms Power Handling Single (RMS): C: 100 W L/R: 60 W System Power Handling (RMS): C: 150 W L/R: 100 W Recommended Amplifier Requirements: C: 20 - 150 W L/R: 10 - 100 W Maximum SPL (dBA): 108 Bass Alignment: C: Bass reflex - front ported L/R: Bass reflex - ported to the underside Drive Unit Complement: 4 x 100mm (4“) MMP®II cone bass/mid driver. 3 x 25mm (1“) C-CAM® gold dome tweeter External Dimensions (H x W x D): mm (inches) 125 x 985 x 105 mm (4 15/16 x 38 5/8 x 4 1/8) Weight (each): Kg (lbs) 8 (17 5/8) User's Manual
|
Five discrete channels from one superb speaker
The perfect surround audio solution when you are unable or unwilling to
use rear channel speakers
Ultra slim design, only 1-5/8" (4cm) deep, perfect for ultra thin LED TVs
Wall mount bracket and table stand included
The dynamic punch, wide frequency range and broad dispersion of
full size speakers
Aircraft grade extruded Aluminum enclosure
Ten anodized Aluminum dome XTDD drivers
Three pure Aluminum dome tweeters
Frequency Response: 60Hz - 30kHz
Sensitivity: 90dB
Nominal Impedance: 8 Ohms
Dimensions: speaker only, not including
bracket: 114.3 x 4 x 13.2cm.
|
For the full cinema-like experience, the ultimate T Series system has the best of everything: T301s all round, supported by the same discreet high performance subwoofer. However big your living area, it envelopes you in an expansive, richly textured sound picture that brings a movie to life as youʼve never experienced before.
T301 / T301c
Design Two and a half-way closed box
Drive units 2 x 115mm (4.5in.) dual layer MF
25mm (1in.) aluminium HF
Frequency response 80Hz - 30kHz
Crossover frequency 1.7kHz
Amplifier requirements 10 - 150 W
Sensitivity (2.83V/1m) 91dB (wall mount)
88dB (floor stand mount)
Maximum output (SPL) 110dB
Impedance 8Ω
Internal volume 1.4 Litres
Weight 1.5kg (3.3lbs)
Dimensions
(H x W x D) 600* x 140 x 35 mm
(23.6 x 5.5 x 1.4 in.)
Dimensions
(H x W x D)
centre mode 140 x 600 x 35 mm
(5.5 x 23.6 x 1.4 in.)
Finish Black
* Height of satellites will increase by 30mm when using supplied desk stand
Not all models / finishes are available in all markets. Contact your local dealer for specific range details.
T-2
Design Closed box powered subwoofer
Drive units 1 x 250mm (10in.)
Frequency response 30Hz - 250Hz
Amplifier 250 Watts built-in Class-D
Maximum output (SPL) 110dB
Low pass filter variable Fixed 250Hz, 2nd-order
Low level signal inputs RCA phono socket
Internal volume 12.7 Litres
Power requirements 100 - 240 V ac ~ 50/60Hz
Power consumption 250VA
Weight 13kg (28.6lbs)
Dimensions
(H x W x D) 380 x 370 x 177 mm
(15.0 x 14.6 x 7.0 in.)
Finish Black
Not all models / finishes are available in all markets.
Contact your local dealer for specific range details.
|
Dimensions | (Metric) :25" W x 8-5/16" H x 16" D | 63.5 x 21.1 x 40.6 cm
Driver Complement :One cast basket 10" sub; Two cast basket 6-1/2" upper-bass/midrange drivers; One 1" pure aluminum dome tweeter
Frequency Response :19 Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 400 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Internal Amplifier Power :150 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts (International)
Inputs :Three sets of five way binding posts: Triwireable; One full range low level RCA
Fuse :
Available Finishes :Piano-Gloss Black
Accessories :Feet (3)
Packaging :One to a carton
Weight | (Metric) :62 lbs | 28.1 kg
Warranty :5 Years; 3 Years for Amplifiers
|
Dimensions | (Metric) :23-1/2" W x 6-3/4" H x 14-1/16" D | 59.7 x 17.1 x 35.7 cm
Driver Complement :One cast basket 8" subwoofer; Two cast basket 5-1/4" upper-bass/midrange drivers; One 1" pure aluminum dome tweeter
Frequency Response :20 Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 300 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Accessories :Feet (3)
Packaging :One to a carton
Internal Amplifier Power :150 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts (International)
Fuse :
Available Finishes :Piano-Gloss Black
Warranty :5 Years; 3 Years for Amplifiers
Inputs :Three sets of five way binding posts: Triwireable; One full range low level RCA
Weight | (Metric) :37 lbs | 16.8 kg
| Model
Brand
Polk Audio
Model
TL1600
Spec
Type
Home Theater Speaker System
Channels
5.1CH
Sold As
System
Speakers Configuration
1 Center Speaker + 1 Subwoofer + 4 Surround Speakers
Driver Units
Center Speaker Midrange: 2 - 2.5" Diameter, Dynamic Balance composite cone driver
Center Speaker Tweeter: 1 - 0.5" Diameter, Silk polymer dome
Surround Speaker Midrange: 1 - 2.5" Diameter, Dynamic Balance composite cone driver
Surround Speaker Tweeter: 1 - 0.5" Diameter, Silk polymer dome
Subwoofer: 1 - 8" Diameter, Long-throw Dynamic Balance polymer composite driver
Power Rating
10-100 w/channel
Frequency Response
40Hz - 22kHz
Nominal Impedance
8 ohms
Connectors
Inputs: 5-way binding posts w/plastic caps
Dimensions & Weight
Center Speaker: 4" x 15" x 3.5" / 3.35 lbs.
Surround Speaker: 6.5" x 3.75" x 4.88" / 1.85 lbs.
Subwoofer: 13.88" x 12.5" x 12.5" / 20.50 lbs.
Cabinet
Center Speaker: Non-resonant composite w/time-aligned geometry and aperiodic tuned port
Surround Speaker: Non-resonant composite w/time-aligned geometry and aperiodic tuned port
Subwoofer: Downward firing vented port
Features
Features
Time Lens technology-The acoustic centers of the tweeter and mid-bass driver are located in the same plane for superior imaging, while the acoustic lens incorporated in the grille smoothes the tweeter's frequency response. The TL Series creates imaging and frequency balance previously impossible in small, high performance satellite speakers.
TL1 satellite aperiodic-tuned rear port enables better blending with a subwoofer. This design combines the bass extension of an acoustic suspension enclosure with the mid-bass boost of a ported enclosure by controlling airflow through the port for better extension without distortion.
TL1 center channel tuned rear port maximizes the low-end response of the dual driver design for superior blending with the satellites and the subwoofer.
Curved enclosure design employs non-parallel surfaces that not only lead to a stronger, more rigid and acoustically inert enclosure, but they also result in less audible coloration from internal surface resonances.
0.5" silk dome tweeter for crisp, clear imaging and smooth response that's never tiring.
2.5" long-throw driver with Dynamic Balance driver technology-Polk's unique transducer design process scientifically tunes materials to produce a flat frequency response, with sharp detail, transparency and the ability to play loud without strain.
5-way binding posts offer hookup versatility and secure connections.
Combination keyhole slot & 1/4" x 20 threaded insert fits all aftermarket ceiling and wall brackets for ultimate flexibility. Or simply hang the speaker securely on a nail or screw using the keyhole slot.
Hi-gloss "Blackstone" finish matches today's most stylish flat panel TV's.
Manufacturer Warranty
Parts
5 years limited
Labor
5 years limited |
Reviews
There are no reviews yet.