Monitor Audio RX Center Loudspeaker 125W 6 Ohms

System Format:    2 1/2 Way
Frequency Response:    45Hz - 35kHz
Sensitivity (1W@1M):    90dB
Nominal Impedance:    6 Ohms
Maximum SPL (dBA):    114.8
Power Handling (RMS):    125W
Recommended Amplifier Requirements (RMS):    40-125W
Bass Alignment:    Sealed Cabinet
Tweeter Crossover Frequency:    LF: 500Hz
MF/HF: 3.0kHz
Drive Unit Complement:    1 x 6" RST® Bass driver.
1 x 6" RST® Bass/Mid driver. 1 x 1" (25mm) C-CAM® gold dome tweeter
Product External Dimensions:
(H x W x D)    185 x 500 x 200 mm
(7 5/16 x 19 11/16 x 7 7/8 inch)
Individual Weight:    9.62 Kg (21.13 lb)

 User's Manual

 ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ

Driver Complements
Mid/Woofer     2 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Midrange    
Tweeter     1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Electrical
Overall Frequency Response     90Hz-31kHz
Lower -3dB Limit     115Hz
Upper -3dB Limit     28kHz
Nominal Impedance     8 ohms
Recommended Amplifier Power     10-125 w/channel
Efficiency     90 dB
Inputs     Gold-plated 5-way binding posts
Dimensions
Cabinet Size     4 5/16" H x 16 11/16" W x 3 15/16" D
(10.95cm H x 42.39cm W x 10.00cm D)
Mounting Options     keyhole slot; one .25 x 20 threaded insert
Enclosure Type     Steel-plate reinforced curved enclsoure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight     4.70 lbs. (2.13kgs)
Shipping unit:     each
Total Shipping Weight     5.50 lbs. (2.49kgs)
Speaker Warranty     5 years parts and labor (original purchaser)

Dimensions | Metric :6" W x 6" D x 48-1/2" H (with base) | 15.2 x 15.2 x 123.2 cm
Packaging :One to a carton
Height with Base | Metric :48-1/2" | 123.2 cm
Base Dimensions | Metric :10" W x 9-3/4" D | 25.4 x 24.8
Driver Complement :One 1" pure aluminum dome tweeter; Two 5-1/4" high definition midrange drivers; Two 5-1/4" high definition bass drivers; Two 5-1/4" pressure coupled bass radiators
Enclosure :Aircraft grade extruded aluminum
Frequency Response :20 Hz – 30 kHz
Recommended Associated Amplifier Power :20 – 250 watts
Available Finishes :Gloss Black
Weight | Metric :37 lbs | 16.8 kg
Impedance :Compatible with 8 Ohms outputs
Inputs :One pair of 5 way binding posts
Warranty :5 Years
A/V Receiver Crossover Setting :60 Hz
Accessories :Plastic Foot Tippers; Isolation Spikes
Sensitivity :92 dB
Base :Tempered Glass

Tweeter 1¨Dynamic Balance Ring Radiator x1
Mid/Woofer 5 ¼ ¨ Dynamic Balance x2
Frequency Response 40Hz - 27kHz
Nominal Impedance 4 Ohms
Rec. Amplifier Power 20-200 W/Channel
Sensitivity 88dB
Dimensions (cm) 17.78x 55.24 x 22.86

Frequency Response: 45Hz- 100kHz
Sensitivity (1W@1M): 89 dB
Nominal Impedance:
4 Ohms
Maximum S.P.L
(Per pair in room): 112.8 dBA
Power Handling (RMS): 200 W
Recommended Amplifier Requirements (RMS): 60 - 200 W
Bass Alignment: Rear Ported HiVe II Technology
Mid / H.F Crossover Frequency: 1800 Hz
Bass Low Pass Crossover Frequency: 250 Hz
Drive Unit Complement: 2 x 6 1/2" RDT bass/mid-range driver
1 x C-CAM high frequency ribbon transducer
External Dimensions -
Excluding Stand: Width: 583mm (22 15/16 inches)
Height: 225mm (8 7/8 inches)
Depth: 291.2mm (11 7/16 inches)
Stand Dimensions: Width: 610mm (24 inches)
Height: 335mm (13 13/16 inches)
Depth 463mm (18 1/4 inches)
Weight: 19 Kg (41.8lbs)

User's Manual

AVAILABLE IN THESE COLOR FINISHES

HF Unit: 25mm neodymium tweeter with high dispersion diaphragm. Ferrofluid cooled and damped. Magnetically shielded. Exclusively Profiled.

MF Unit: 110mm mid range driver with 32mm long-throw voice coil, die cast chassis, high power, magnet system and lightweight alloy cone. Magnetically shielded.


LF Unit: 110mm mid/bass driver with 32mm long-throw voice coil, die cast chassis, high power, magnet system and lightweight alloy cone. Magnetically shielded.

Power Handling: 150 watt max

Overall Frequency Response: 55Hz – 23kHz

Sensitivity: 90dB

Impedance: 8 ohms

Cabinet: Real wood veneered. 15mm MDF wrap. Dual chamber. High power, back firing, low turbulence bass reflex port. 22mm front baffle

Terminals: Gold-plated 4-way binding posts

Dimensions:  WxHxD 450 x 180 x 297 mm

Weight:  (exc packaging) 8kg each