Monitor Audio R ONE HD Bar Loudspeaker 100W Ohms

Frequency Response: C: 55 Hz - 35 KHz
L/R: 85Hz - 35KHz
Sensitivity (1W@1m): C: 90 dB
L/R: 87dB
Nominal Impedance: C: 8 Ohms
L/R: 8 Ohms
Power Handling Single (RMS): C: 100 W
L/R: 60 W
System Power Handling (RMS): C: 150 W
L/R: 100 W
Recommended Amplifier Requirements: C: 20 - 150 W
L/R: 10 - 100 W
Maximum SPL (dBA): 108
Bass Alignment: C: Bass reflex - front ported
L/R: Bass reflex - ported to the underside
Drive Unit Complement: 4 x 100mm (4“) MMP®II cone bass/mid driver.
3 x 25mm (1“) C-CAM® gold dome tweeter
External Dimensions
(H x W x D): mm (inches) 125 x 985 x 105 mm
(4 15/16 x 38 5/8 x 4 1/8)
Weight (each):
Kg (lbs) 8 (17 5/8)

User's Manual

Five discrete channels from one superb speaker
The perfect surround audio solution when you are unable or unwilling to
use rear channel speakers
Ultra slim design, only 1-5/8" (4cm) deep, perfect for ultra thin LED TVs
Wall mount bracket and table stand included
The dynamic punch, wide frequency range and broad dispersion of
full size speakers
Aircraft grade extruded Aluminum enclosure
Ten anodized Aluminum dome XTDD drivers
Three pure Aluminum dome tweeters
Frequency Response: 60Hz - 30kHz
Sensitivity: 90dB
Nominal Impedance: 8 Ohms
Dimensions: speaker only, not including
bracket: 114.3 x 4 x 13.2cm.

# The perfect speaker solution when you want big, high definition sound from compact, easy-to-use speakers
# Only 2-1/2 inches (6.4cm) deep for unobtrusive high performance
# Perfect appearance and timbre match for Mythos XTR series front speakers
# Bipolar driver array disperses surround sound over a wide area for enveloping effects
# Two high-definition XTDD 3-1/2 inch mid/bass drivers for life-like clarity
# Wall mount bracket and vertical table support stand included

Dimensions (mounted on wall without bracket) :11-7/8" H x 6" W x 2-1/2" D | 30.1cm H x 15.2cm W x 6.4cm D
Dimensions (mounted on wall with bracket) :11-7/8" H x 6" W x 2-9/16" D | 30.1cm H x 15.2cm W x 6.5cm D
Driver complement :2 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers in a bipolar array, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :100Hz - 30kHz
Sensitivity :90dB
Impedance :8 Ohms nominal
Recommended amplifier power :20 - 100 Watts per channel
Enclosure :Extruded Aluminum, sealed
Product weight (without table stand) :
Supplied accessories :Wall mount bracket, adjustable support foot for vertical shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black

Dimensions | Metric :46-1/4" W x 4-1/8" D x 5-3/8" H: speaker only, not including bracket | 117.5 x 10.5 x 13.7 cm
Driver Complement :Three 4-1/2" BDSS drivers with Axially Aligned 1" pure aluminum dome tweeters; Two 4-1/2" BDSS High-output full-range drivers; Four 3-1/4" full-range high-output surround drivers
Frequency Response :50 Hz – 30 kHz
Accessories :Wall bracket; Leveler Feet
Sensitivity :90dB
Recommended Associated Amplifier Power :20 – 200 watts
Inputs :Five pairs of 5 way binding posts
A/V Receiver Crossover Setting :100 Hz
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Impedance :Compatible with 8 Ohms outputs
Mounting Options :Horizontally: wall or shelf mounting with included bracket and leveler feet
Weight | Metric :31 lbs | 14.1 kg
Warranty :5 Years

Dimensions | (Metric) :23-1/2" W x 6-3/4" H x 14-1/16" D | 59.7 x 17.1 x 35.7 cm
Driver Complement :One cast basket 8" subwoofer; Two cast basket 5-1/4" upper-bass/midrange drivers; One 1" pure aluminum dome tweeter
Frequency Response :20 Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 300 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Accessories :Feet (3)
Packaging :One to a carton
Internal Amplifier Power :150 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts (International)
Fuse :
Available Finishes :Piano-Gloss Black
Warranty :5 Years; 3 Years for Amplifiers
Inputs :Three sets of five way binding posts: Triwireable; One full range low level RCA
Weight | (Metric) :37 lbs | 16.8 kg

• More versatile mounting options than any other loudspeaker, with a modular, removable, switch-around base and built-in keyhole slots.
• Mounting Options: 1. Angled wall mount 2. Corner mount 3. Horizontal wall mount 4. Vertical wall mount 5. Shelf mount 6. Horizontal shelf mount 7. Use an optional articulating bracket (such as OmniMount 10.0 not included) for ceiling or swiveled wall use.
• (If you can think of any more, please let us know!)
• The OWM Series is timbre-matched to other Polk loudspeakers, so you can mix and match them to build or add to existing systems.
• Dynamic Balance® composite cone drivers are lightweight and stiff, with excellent damping qualities, for high efficiency, excellent mid-bass and low distortion even at extreme volume levels.
• Patented Dynamic Balance materials technology tunes out cone resonances before they become a part of the finished product, so you only hear the most realistic, natural audio reproduction.
• Durable, high performance fabric dome tweeters deliver clear and detailed high frequency response and excellent imaging.
• Capacitive Coupling Technology (CCT), an advanced signal-blocking technology that overcomes the usual limitations of small-enclosure loudspeakers (slim dynamics and no low frequency response), delivers extended dynamic range and enhancing deep bass response for clear, detailed musicality with little or no coloration.
• Glass-filled ABS enclosure is super-dense and acoustically inert, ensuring an extremely clean and low coloration midrange response.
• Paintable white finish blends into any decor.
• 5-way gold-plated binding posts, for the best connections, are easily accessible no matter how you mount the speaker.

• Total Pieces2

• Included Accessories
  • (1) Grille
  • (1) Removable Base

• Cabinet Warranty5 years
• Drivers Warranty5 years
• Original Purchaser OnlyYes

• Carton 1 11.25" (28.58 cm) h x 11" (27.94 cm) w x 11" (27.94 cm) d - 10.5 lbs (4.76 kg)

• Qty Included Pair
• Availability US
• Orientation
  • Vertical
  • Horizontal
• Height10" (25.4 cm)
• Width7" (17.78 cm)
• Depth4" (10.16 cm)
• Weight4 lbs (1.81 kg)
• Front Array Driver Complement
  • (1)  4.5" (11.43 cm) d (Round) - Mid/Woofer
  • (1)  1" (2.54 cm) d (Round) - Tweeter

• Total Frequency Response80 Hz → 25 kHz
• Sensitivity (1 watt @ 1 meter)89 dB
• Lower and Upper -3dB Limits100 Hz → 22 kHz

• Mounting TypeKeyhole Hanger
• Available Orientations
  • Vertical
  • Horizontal
• Mounting Location
  • Back of Speaker
  • Bottom of Speaker
  Near: Bottom, Center

• Mounting Type1/4" 20 Threaded Insert
• Available Orientations
  • Horizontal
  • Vertical
• Mounting Location
  • Back of Speaker
  • Bottom of Speaker
  Near: Bottom, Center

• Mounting TypeKeyhole Hanger
• Available OrientationsHorizontal
• Mounting LocationBack of Speaker - Near: Center

• Mounting TypeKeyhole Hanger
• Available Orientations
  • Horizontal
  • Vertical
• Mounting Location
  • Back of Speaker
  • Bottom of Speaker
  Near: Bottom, Center

• Recommended Amplifier Power Per Channel 20 watts → 100 watts

• Audio Inputs
• Speaker Inputs (1) 5-way Binding Posts - Gold-Plated