Content | MASS CENTRE
Frequency Response 80Hz – 30kHz
Sensitivity 84dB
System Configuration 2- way
Driver complement 1 x 4" C-CAM Bass/Mid-range Driver
1 x 25mm C-CAM® tweeter
with vented loading system
Nominal Impedance 8 ohms
Maximum SPL (each @1M) 104 dBA
Power Handling with amplifier 100 watts
crossover set to 100hz (RMS)
Power Handling (individual) 40 watts
Recommended Amplifier 25-100 watts
Requirements Recommended High Pass 80-120Hz
Crossover Frequency
Bass Alignment Reflex Rear Ported
Overall Dimensions 128 x 228 x 128 mm
(H x W x D) 51/16 x 813/16 x 51/16 Inches
Weight 1.65kg (3lb, 10oz) |
Dimensions | Metric :14-3/4" W x 5" D x 5" H | 37.5 x 12.7 x 12.7 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 4-1/2" BDSS upper bass/midrange drivers; Two 4-1/2" pressure coupled bass radiators
Frequency Response :47 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :90 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :80 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Gloss Black; Gloss White
Accessories :Leveler Foot; Two ¼ 20 insert cover plugs
Mounting Options :On Shelf with included leveling foot; Equipped with two ¼ 20 sized threads to accommodate on wall mounting with two ProMount 80 (available separately)
Packaging :One to a carton
Weight | Metric :6 lbs | 2.7 kg
Warranty :5 Years |
System Format: 3 Way
Frequency Response: 40 Hz - 60 kHz
Sensitivity (1W@1M): 90 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 113.8 dBA
Power Handling (RMS): 200 W
Recommended Amplifier Requirements (RMS): 100 - 200 W
Bass Alignment: Sealed Cabinet
Crossover Frequency: L.F - M.F: 800 Hz
M.F - H.F: 2.3 kHz
Drive Unit Compliment:
2 x 6.5" RST bass/mid-range driver
1 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)
254 x 581 x 333 mm
(10 x 22 7/8 x 13 1/8 inch)
Weight (each) Excluding stands: 18.9 Kg (41.6lbs)
|
Driver Complements
Mid/Woofer 2 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Midrange
Tweeter 1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Electrical
Overall Frequency Response 90Hz-31kHz
Lower -3dB Limit 115Hz
Upper -3dB Limit 28kHz
Nominal Impedance 8 ohms
Recommended Amplifier Power 10-125 w/channel
Efficiency 90 dB
Inputs Gold-plated 5-way binding posts
Dimensions
Cabinet Size 4 5/16" H x 16 11/16" W x 3 15/16" D
(10.95cm H x 42.39cm W x 10.00cm D)
Mounting Options keyhole slot; one .25 x 20 threaded insert
Enclosure Type Steel-plate reinforced curved enclsoure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight 4.70 lbs. (2.13kgs)
Shipping unit: each
Total Shipping Weight 5.50 lbs. (2.49kgs)
Speaker Warranty 5 years parts and labor (original purchaser)
|
System Format: 2 Way
Frequency Response: 55 Hz - 60 kHz
Sensitivity (1W@1M): 89 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 111.5 dBA
Power Handling (RMS): 150 W
Recommended Amplifier Requirements (RMS): 100 - 150 W
Bass Alignment: Sealed Cabinet
Crossover Frequency: 2.8 kHz
Drive Unit Compliment: 2 x 5.5" RST bass/mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)
172 x 461 x 303 mm
(6 11/16 x 18 1/8 x 11 15/16 inch)
Weight (each) Excluding stands: 6 Kg (13.25 lbs)
|
Frequency Response
60Hz - 35KHz
Sensitivity
86dB
Nominal Impedance
6 Ohms
Power Handling Single (RMS)
100 Watts
System Power Handling (RMS)
150 Watts
Recommended Amplifier Requirements
40-150 Watts
Maximum SPL (dBA)
106
Bass Alignment
Bass reflex - Rear ported
Driver complement
2 x 4” (100mm) C-CAM® cone bass/mid driver
1 x 1” (25mm) C-CAM gold dome tweeter
Cabinet Dimensions (H x W x D)
125 x 330 x 140mm
(415/16 x 13 x 51/2 Inches)
Cabinet Dimensions (H x W x D)(Inc Grille & Terminals)
125 x 330 x 164mm
(415/16 x 13 x 67/16 Inches)
Weight
3.6kg (7lb 14oz)
|
Reviews
There are no reviews yet.