MONITOR AUDIO MASS W200 Subwoofer

MASS W200

System Format             Active sub-woofer system - Auxilary (ABR) loading.  18mm MDF cabinet (CARB2 approved)
Low Frquency Limit         30Hz (-6dB)
Upper frequency limit         Variable 40 - 120Hz @ 24dB/Octave
Amplifier Power Output         220 watts @ 1% THD+N
Amplifier Classification     Class - D amplifier with Switch mode power supply (SMPSU)
Bass EQ Switch             Music / Movie / Impact
Phase Control             0-180 degrees
Auto Sensing             Line Level >3.5mmV
Input Level Requirements     Standby after approx. 20 minutes if no signal sensed
Driver Compliment        1 x 10" (250mm) C-CAM® Long Throw Driver
                1 x 10" (260mm) Auxilary bass radiator
Input Impendence         > 20K Ohms
Mains input voltage         100 - 120 Vac / 220 - 240 Vac 50/60Hz (Factory Region Present)
Dimensions (H x W x D)        420 x 385 x 385 mm  /  169/16 x 163/16 x 163/16 Inches
(Including grilles and feet)
Connections             Stereo RCA in, LFE in, 12v Trigger in (3.5 mono mini-jack)
12v Trigger input         5 12v via 3.5 via mono mini-jack socket
Power Consumption         200 watts / 0.5 watts in Standby (ErP approved)
Weight                 15.96Kg (35lb, 2oz)

Dimensions | Metric :10-1/4” W x 10-1/4” D x 10-1/4” H | 26.0 x 26.0 x 26.0 cm
Driver Complement :One high-definition 7-1/2" long throw woofer, pressure coupled to two 7-1/2” low bass radiators
Frequency Response :16 Hz – 200 Hz
Internal Amplifier Power :650 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :5 way binding posts
High Level Outputs :5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz: Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave continuously variable from 40 Hz – 150 Hz:
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :25 lbs | 11.3 kg
Warranty :5 Years; 3 Years for Amplifiers

Type     Advanced YST II and QD-Bass Subwoofer
Driver     25cm(10'') cone
Dynamic Power     250 W
Frequency Response     20-160 Hz
Advanced YST     Advanced YST II
QD-Bass Technology     Front-firing
High-Efficiency Power Amplifier     Yes
Linear Port     Yes
BASS (Bass Action Selector System)     Yes
Standby Power Consumption     0.3 W
Dimensions (W x H x D)     380 x 368 x 420 mm
Weight     18.5 kg

Outer Flange Dimensions | (Metric) :15-1/2” W x 21” H | 39.4 x 53.3 cm
Cut Out Dimensions | (Metric) :14-3/8” W x 19-7/8” H | 36.5 x.50.5 cm
Depth from Flange | Metric :3-13/16” | 9.7 cm
Driver Complement :One 10" Long-Excursion Woofer coupled to one 10" infrasonic Radiator
Frequency Response :16 Hz – 200 Hz
Impedance :4 ohms
Required Amplifier :SubAmp 600 (available separately)
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template; Paintable removable all metal grill
Packaging :One to a carton
Weight | (Metric) :30 lbs | 13.6 kg

    Pressure vessel enclosure

500W ICEpower® amplifier
Switch mode power supply
Description     Active closed-box subwoofer system
Drive unit     2x f200mm (8 in) mica / aluminium diaphragm long-throw
Frequency range     -6dB at 18Hz and 40/140Hz adjustable (EQ at i)
Frequency response     ±3dB 21Hz – 31/110Hz adjustable (EQ at i)
Power output:     500W
Rated power consumption:     110W (105W - 100V version)
Input impedance:     100kΩ
Signal / noise:     >90dB
Functions:     Volume level
Low-pass filter frequency
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs:     Line In (RCA Phono)
Speaker Level In (FCC68 4/4)