Content |
The MRW10 Subwoofer features in Monitor Audio's MR series of speakers. The subwoofer delivers deep, rich bass with superior amplifier power.
The MRW10 utilises a 10" MMPII driver specifically design to optimise stiffness and consistency and a 100 Watt Class-D power amplifier for unbelievably impressive base with control, speed and punch.
The MRW10 offers a fully integrated switch mode power supply and is available in two stylish finishes, black oak and walnut.
The MRW10 is a perfect choice to complete your home cinema setup adding deep powerful bass that's hard to beat from even the most expensive rivals on the market.
Amplifier power (watts) 100
Biwireable? No
Drivers
1 x 10" Long Throw Driver
Finish Black or Walnut
Frequency response (Hz) 28 - 150
Sensitivity (dB) 12dB/octave filter
W x H x D (mm) 320 x 320 x 340
Weight (kg) 12.9
| Hxείο Sub, high Fidelity, 300 Watts Continuous Program Power (2 hrs) 150 Watts ContinuousPink Noise (2 hrs)200 Watts Continuous Program Power (100 hrs) 100 Watts Continuous Pink Noise (100 hrs), 115dB average, 121dB peak (near corner) 109dB average, 115 dB peak (center of wall) 32 Hz ? 200 Hz +-3dΒ Eπιλογή λειτουργίας 70/100v/, 80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru, με 1 woofer 200 mm (8 in) με polypropylene cone, ανάρτηση butyl rubber, με πηνίο φωνής 38 mm (1.5 in) 4-layer copper-clad, και αεριζόμενο former αλουμινίου. Διαστάσεις: 356 x 391 x 203 mm. Περιέχεται βάση στήριξης. Χρώμα Μαύρο-Λευκό. Μπορεί να λειτουργήσει με 2 ή 4 δορυφόρους ?ηχεία, και σε συνδυασμό με ηχεία οροφής της σειράς 40 της JBL. Βάρος 9kg. |
Crossover Tuning
Mushrooms
Description Active closed-box subwoofer system
Drive unit ø250mm (10 in) paper/Kevlar® cone long-throw
Frequency range -6dB at 18Hz and 25/140Hz adjustable (EQ at A)
Frequency response ±3dB 25Hz – 40/140Hz adjustable (EQ at A)
Bass Extension -6dB at 18Hz (position A)
-6dB at 23Hz (position B)
-6dB at 28Hz (position C)
Amplifier Power output: 500W
Rated power consumption: 98W / 1W standby
Input impedance: 33kΩ
Signal / noise: >90dB
Functions: Input level (line in)
Input level (speaker in)
Low-pass filter frequency (line in only)
Low-pass filter bypass
Bass extension
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs: Line In (RCA Phono)
Speaker in (Binding post)
12v trigger (3.5mm jack)
Low-pass filter
Active 4th-order, variable cut-off frequency
Dimensions Height: 325mm (12.8 in) not including feet
Width: 325mm (12.8 in)
Depth: 375mm (14.8 in) including grille and controls
Net weight 15.5kg (34.4 lb)
Finishes Matte Black
|
System Format: Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment Low Frequency Limit: 18 Hz Upper Frequency Limit: 40 - 120 Hz Variable Low Pass Filter Alignment: Active 4th order 24dB/octave (6/12/18/24 dB user adjustable) Amplifier Power Output 650 watts Continuous. 1200 watts (peak) Amplifier Classification D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu) Equalisation 4 Settings (Off/Music/Movie/Impact) Phase Control 0-90-180-270 degrees Auto Sensing Input Level Requirements Line Level > 2mV. Standby after 10 minutes if no signal sensed Digital Volume Level -60 to +10dB in 1dB increments Drive Unit Complement 1 x 15” C-CAM® sub-woofer driver featuring triple suspension 3” long throw voice coil 12V Trigger Input 3.5mm mono jack socket Connections Stereo RCA in/out LFE in/out 12V Trigger in (3.5mm mono jack) LEO* - 3.5mm Microphone input jack (microphone supplied) Input Impedance 20 kohms Dimensions (H x W x D) 430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches) Grille Depth 28 mm (1 1/8 Inches) Weight (unpacked) 35.3 kg (77.6 lbs) Mains Input Voltage 100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset) Electrical Certifications CE/CB/ETL/Fcc/ErP (Energy saving compliant) Power Consumption Maximum 1000W. Standby Fuse Type 20mm UL/VDE (Value is region specific) IR Remote Control Code NEC SH6122 AVAILABLE IN SIX COLOR FINISHES
|
Low Frequency Limit: 27Hz (EQ1) 21Hz (EQ2)
Upper Frequency Limit: 40 - 120Hz Variable
Power Output: 500W RMS (1000W Peak)
Low Pass Filter Alignment: Active 4th order 24dB/Octave (2nd stage filter)
Cabinet Specification: 25mm construction and internal bracing
Cabinet Alignment: sealed cabinet
Driver Complement: 1 x 12" C-CAM® sub woofer driver featured triple suspension and ling throw 3" voice coil
External Dimensions:
(H x W x D)
inc. amp & driver 340 x 340 x 410 mm
(13 3/8 x 13 3/8 x 16 1/8 inch)
External Dimensions:
(H x W x D)
inc. feet & grille 375mm (15“) high with feet
430mm (16 15/16“) deep
inc amp & grille
Mains Input Voltage Specification: 110 - 120 Vac / 220 - 240 Vac 50/60Hz
Individual Weight: 22.56 Kg (49.63 lb)
User's Manual
ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ
|
Type Advanced YST II and QD-Bass Subwoofer
Driver 25cm(10'') cone
Dynamic Power 250 W
Frequency Response 20-160 Hz
Advanced YST Advanced YST II
QD-Bass Technology Front-firing
High-Efficiency Power Amplifier Yes
Linear Port Yes
BASS (Bass Action Selector System) Yes
Standby Power Consumption 0.3 W
Dimensions (W x H x D) 380 x 368 x 420 mm
Weight 18.5 kg
|
Reviews
There are no reviews yet.