Content |
Frequency Response
80Hz - 35KHz
Sensitivity
87dB
Nominal Impedance
6 Ohms
Power Handling Single (RMS)
100 Watts
System Power Handling (RMS)
150 Watts
Recommended Amplifier Requirements
40-150 Watts
Maximum SPL (dBA)
107
Bass Alignment
Bass reflex - Front ported
Driver complement
2 x 4” (100mm) C-CAM® cone bass/mid driver
1 x 1” (25mm) C-CAM gold dome tweeter
Cabinet Dimensions (H x W x D)
610 x 140 x 67mm
(24 x 51/2 x 25/8 Inches)
Cabinet Dimensions (H x W x D)(Inc Grille & Terminals)
610 x 140 x 77mm
(24 x 51/2 x 31/16 Inches)
Cabinet Dimensions (H x W x D)(Inc Grille & Bracket)
610 x 140 x 84mm
(24 x 51/2 x 35/16 Inches)
Bracket
Dedicated bracket included
Weight
4.2kg (9lb 4oz)
|
Power handling (watts): 170 (RMS)
Sensitivity (dB): 90
Nominal impedance (ohms): 8
Magnetically shielded
W x H x D (mm): 480 x 178 x 195
Weight (kg): 9
Frequency response (Hz): 35 - 45,000
Connections: Gold-plated 4mm banana socket/binding posts
Bass port Rear reflex
Drivers: HF: Dual ring-radiator design
LF: 2 x 130mm pressed allow cones with twin Neodymium magnets and long throw voice coil
Supplied accessories: Removable grille
Finish: black ash/ walnut |
Tweeter 1¨Dynamic Balance Ring Radiator x1
Mid/Woofer 5 ¼ ¨ Dynamic Balance x2
Frequency Response 40Hz - 27kHz
Nominal Impedance 4 Ohms
Rec. Amplifier Power 20-200 W/Channel
Sensitivity 88dB
Dimensions (cm) 17.78x 55.24 x 22.86
|
Frequency Response: 45Hz- 100kHz Sensitivity (1W@1M): 89 dB Nominal Impedance: 4 Ohms Maximum S.P.L (Per pair in room): 112.8 dBA Power Handling (RMS): 200 W Recommended Amplifier Requirements (RMS): 60 - 200 W Bass Alignment: Rear Ported HiVe II Technology Mid / H.F Crossover Frequency: 1800 Hz Bass Low Pass Crossover Frequency: 250 Hz Drive Unit Complement: 2 x 6 1/2" RDT bass/mid-range driver 1 x C-CAM high frequency ribbon transducer External Dimensions - Excluding Stand: Width: 583mm (22 15/16 inches) Height: 225mm (8 7/8 inches) Depth: 291.2mm (11 7/16 inches) Stand Dimensions: Width: 610mm (24 inches) Height: 335mm (13 13/16 inches) Depth 463mm (18 1/4 inches) Weight: 19 Kg (41.8lbs) User's Manual AVAILABLE IN THESE COLOR FINISHES
|
Enclosure Sealed/Ported
Tweeter Ring Radiator
Midrange size (inches) 3-1/4
Woofer size (inches) 6-1/2
Connector Type Post
Power Range 20-250
Sensitivity 88 dB
Impedance (Ohms) 8
Frequency Response 50-30k Hz
Height (inches) 9-1/16
Width (inches) 28-11/16
Depth (inches) 14
Weight 42.3 lbs
Parts Warranty 5 Years
Labor Warranty 5 Years
ALSO AVAILABLE IN "EBONY" COLOR
|
System Format: 2 Way
Frequency Response: 55 Hz - 60 kHz
Sensitivity (1W@1M): 89 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 111.5 dBA
Power Handling (RMS): 150 W
Recommended Amplifier Requirements (RMS): 100 - 150 W
Bass Alignment: Sealed Cabinet
Crossover Frequency: 2.8 kHz
Drive Unit Compliment: 2 x 5.5" RST bass/mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)
172 x 461 x 303 mm
(6 11/16 x 18 1/8 x 11 15/16 inch)
Weight (each) Excluding stands: 6 Kg (13.25 lbs)
|
Reviews
There are no reviews yet.