Content |
Frequency Response
80Hz - 35KHz
Sensitivity
87dB
Nominal Impedance
6 Ohms
Power Handling Single (RMS)
100 Watts
System Power Handling (RMS)
150 Watts
Recommended Amplifier Requirements
40-150 Watts
Maximum SPL (dBA)
107
Bass Alignment
Bass reflex - Front ported
Driver complement
2 x 4” (100mm) C-CAM® cone bass/mid driver
1 x 1” (25mm) C-CAM gold dome tweeter
Cabinet Dimensions (H x W x D)
610 x 140 x 67mm
(24 x 51/2 x 25/8 Inches)
Cabinet Dimensions (H x W x D)(Inc Grille & Terminals)
610 x 140 x 77mm
(24 x 51/2 x 31/16 Inches)
Cabinet Dimensions (H x W x D)(Inc Grille & Bracket)
610 x 140 x 84mm
(24 x 51/2 x 35/16 Inches)
Bracket
Dedicated bracket included
Weight
4.2kg (9lb 4oz)
|
Tweeter 1¨Silk Dome Dynamic Balance x1
Mid/Woofer 5 ¼¨Dynamic Balance Bi-Laminatex2
Frequency Response 53Hz - 25kHz
Nominal Impedance 8 Ohms
Rec. Amplifier Power 20-125 W/Channel
Sensitivity 91dB
Dimensions (cm) 17.78 x 50.80 x 20.32 |
System Format: 3 Way
Frequency Response: 40 Hz - 60 kHz
Sensitivity (1W@1M): 90 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 113.8 dBA
Power Handling (RMS): 200 W
Recommended Amplifier Requirements (RMS): 100 - 200 W
Bass Alignment: Sealed Cabinet
Crossover Frequency: L.F - M.F: 800 Hz
M.F - H.F: 2.3 kHz
Drive Unit Compliment:
2 x 6.5" RST bass/mid-range driver
1 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)
254 x 581 x 333 mm
(10 x 22 7/8 x 13 1/8 inch)
Weight (each) Excluding stands: 18.9 Kg (41.6lbs)
|
HF unit
25mm neodymium tweeter with high dispersion diaphragm. Ferro fluid cooled and damped. Magnetically shielded.
MF unit
150mm mid range driver with 32mm coil, die-cast chassis, high-power, long-throw magnet system and light weight alloy cone. Magnetically shielded.
LF unit
150mm bass driver with 32mm coil, die-cast chassis, high-power, long-throw magnet system and light weight alloy cone. Magnetically shielded.
Power Handling 150W max
Frequency response +/-6db 55Hz to 23kHz
Sensitivity 90 db/W
Impedance 8 ohms
Cabinet Real wood veneered. 15mm MDF wrap with 30mm MDF front baffle. High power, low turbulence, front firing bass reflex ports.
Terminals Gold-plated 2-way binding posts.
Weight
(excl. packaging) 8kg
Dimensions
Width 530mm
Height 170mm
Depth 196 mm
|
Power handling (watts): 170 (RMS)
Sensitivity (dB): 90
Nominal impedance (ohms): 8
Magnetically shielded
W x H x D (mm): 480 x 178 x 195
Weight (kg): 9
Frequency response (Hz): 35 - 45,000
Connections: Gold-plated 4mm banana socket/binding posts
Bass port Rear reflex
Drivers: HF: Dual ring-radiator design
LF: 2 x 130mm pressed allow cones with twin Neodymium magnets and long throw voice coil
Supplied accessories: Removable grille
Finish: black ash/ walnut |
Frequency Response
60Hz - 35KHz
Sensitivity
86dB
Nominal Impedance
6 Ohms
Power Handling Single (RMS)
100 Watts
System Power Handling (RMS)
150 Watts
Recommended Amplifier Requirements
40-150 Watts
Maximum SPL (dBA)
106
Bass Alignment
Bass reflex - Rear ported
Driver complement
2 x 4” (100mm) C-CAM® cone bass/mid driver
1 x 1” (25mm) C-CAM gold dome tweeter
Cabinet Dimensions (H x W x D)
125 x 330 x 140mm
(415/16 x 13 x 51/2 Inches)
Cabinet Dimensions (H x W x D)(Inc Grille & Terminals)
125 x 330 x 164mm
(415/16 x 13 x 67/16 Inches)
Weight
3.6kg (7lb 14oz)
|
Reviews
There are no reviews yet.