MONITOR AUDIO RADIUS 200

Frequency Response

60Hz - 35KHz

Sensitivity

86dB

Nominal  Impedance

6 Ohms

Power Handling Single (RMS)

100 Watts

System Power Handling (RMS)

150 Watts

Recommended Amplifier Requirements

40-150 Watts

Maximum SPL (dBA)

106

Bass Alignment

Bass reflex - Rear ported

Driver complement

2 x 4” (100mm) C-CAM® cone bass/mid driver
1 x 1” (25mm) C-CAM gold dome tweeter

Cabinet Dimensions (H x W x D)

125 x 330 x 140mm
(415/16 x 13 x 51/2 Inches)

Cabinet Dimensions (H x W x D)(Inc Grille & Terminals)

125 x 330 x 164mm
(415/16 x 13 x 67/16 Inches)

Weight

3.6kg (7lb 14oz)

Enclosure     Sealed/Ported
Tweeter     Ring Radiator
Midrange size (inches)     3-1/4
Woofer size (inches)     6-1/2
Connector Type     Post
Power Range     20-250
Sensitivity     88 dB
Impedance (Ohms)     8
Frequency Response     50-30k Hz
Height (inches)     9-1/16
Width (inches)     28-11/16
Depth (inches)     14
Weight     42.3 lbs
Parts Warranty     5 Years
Labor Warranty     5 Years

ALSO AVAILABLE IN "EBONY" COLOR

Driver Complements
Mid/Woofer     2 - 3 1/4" Diameter (8.26cm)
Dynamic Balance composite cone driver
Midrange    
Tweeter     1 - 3/4" Diameter (1.91cm)
silk dome
Electrical
Overall Frequency Response     90Hz-24kHz
Lower -3dB Limit     125Hz dB
Upper -3dB Limit     20kHz dB
Nominal Impedance     8 ohms
Recommended Amplifier Power     10-125 w/channel
Efficiency     91 dB
Inputs     Gold-plated 5-way binding posts
Dimensions
Cabinet Size     4 1/4" H x 16 11/16" W x 3 13/16" D
(10.79cm H x 42.39cm W x 9.68cm D)
Mounting Options     keyhole slot; .25 x 20 threaded insert
Enclosure Type     Non-resonant curved enclosure with time-alinged driver geometry and PowerPort bass venting
Shipping/Other
Product Weight     4.50 lbs. (2.04kgs)
Shipping unit:     each
Total Shipping Weight     5.50 lbs. (2.49kgs)
Speaker Warranty     5 years parts and labor (original purchaser)

Power handling (watts): 170 (RMS)  
Sensitivity (dB): 90  
Nominal impedance (ohms): 8  
Magnetically shielded
W x H x D (mm): 480 x 178 x 195  
Weight (kg): 9  
Frequency response (Hz): 35 - 45,000  
Connections: Gold-plated 4mm banana socket/binding posts  
Bass port Rear reflex  
Drivers: HF: Dual ring-radiator design
LF: 2 x 130mm pressed allow cones with twin Neodymium magnets and long throw voice coil  
Supplied accessories: Removable grille  
Finish: black ash/ walnut

System Format: 3 Way
Frequency Response: 40 Hz - 60 kHz
Sensitivity (1W@1M): 90 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 113.8 dBA
Power Handling (RMS): 200 W
Recommended Amplifier Requirements (RMS): 100 - 200 W
Bass Alignment: Sealed Cabinet
Crossover Frequency: L.F - M.F: 800 Hz
M.F - H.F: 2.3 kHz
Drive Unit Compliment:
2 x 6.5" RST bass/mid-range driver
1 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer

External Dimensions excl Stand (H x W x D)

254 x 581 x 333 mm
(10 x 22 7/8 x 13 1/8 inch)
Weight (each) Excluding stands: 18.9 Kg (41.6lbs)

AVAILABLE IN SIX COLOR FINISHES

System Format:    3 Way
Frequency Response:    40 Hz - 60 kHz
Sensitivity (1W@1M):    90 dB
Nominal Impedance:    8 ohms
Maximum S.P.L
(Per pair in room):    113.8 dBA
Power Handling (RMS):    200 W
Recommended Amplifier Requirements (RMS):    100 - 200 W
Bass Alignment:    Sealed Cabinet
Crossover Frequency:    L.F - M.F: 800 Hz
M.F - H.F: 2.3 kHz
Drive Unit Compliment:    
2 x 6.5" RST bass/mid-range driver
1 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer

External Dimensions excl Stand (H x W x D)

254 x 581 x 333 mm
(10 x 22 7/8 x 13 1/8 inch)
Weight (each) Excluding stands:    18.9 Kg (41.6lbs)