Content |
Frequency Response
90Hz - 35KHz
Sensitivity
87dB
Nominal Impedance
6 Ohms
Power Handling Single (RMS)
75 Watts
System Power Handling (RMS)
100 Watts
Recommended Amplifier Requirements
30-100 Watts
Maximum SPL (dBA)
106
Bass Alignment
C:Bass reflex - Front ported L/R:Bass reflex - Side ported
Driver complement
3 x 4” (100mm) C-CAM cone bass/mid driver
3 x 1” (25mm) C-CAM gold dome tweeter
Cabinet Dimensions (H x W x D)
175 x 980 x 67mm
(67/8 x 389/16 x 25/8 Inches)
Cabinet Dimensions (H x W x D)(Inc Grille & Terminals)
175 x 980 x 79mm
(67/8 x 389/16 x 31/8 Inches)
Cabinet Dimensions (H x W x D)(Inc Grille & Bracket)
175 x 980 x 84mm
(67/8 x 389/16 x 35/16 Inches)
Bracket
Dedicated bracket included
Weight
7.4kg (16lb 4oz)
|
Dimensions | (Metric) :23-1/2" W x 6-3/4" H x 14-1/16" D | 59.7 x 17.1 x 35.7 cm
Driver Complement :One cast basket 8" subwoofer; Two cast basket 5-1/4" upper-bass/midrange drivers; One 1" pure aluminum dome tweeter
Frequency Response :20 Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 300 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Accessories :Feet (3)
Packaging :One to a carton
Internal Amplifier Power :150 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts (International)
Fuse :
Available Finishes :Piano-Gloss Black
Warranty :5 Years; 3 Years for Amplifiers
Inputs :Three sets of five way binding posts: Triwireable; One full range low level RCA
Weight | (Metric) :37 lbs | 16.8 kg
|
imensions | Metric :40" W x 4-1/4" D x 4-1/4" H: speaker only, not including bracket | 101.6 x 10.5 x 10.5 cm
Driver Complement :Three 3-1/4" BDSS drivers with Axially Aligned 3/4" pure aluminum dome tweeters; Two 3-1/4" BDSS High-output full-range drivers; Four 3" full-range high-output surround drivers
Frequency Response :60 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :89dB
Recommended Associated Amplifier Power :20 – 175 watts
A/V Receiver Crossover Setting :140 Hz
Inputs :Five pairs of 5 way binding posts
Mounting Options :Horizontally: wall or shelf mounting with included bracket and leveler foot
Available Finishes :Gloss Black
Warranty :5 Years
Weight | Metric :20 lbs | 9.1 kg
Enclosure :Aircraft grade extruded aluminum |
Dimensions | (Metric) :9-3/16" W x 5-15/16" D x 10-1/2" H | 23.3 x 15.1 x 26.7 cm
Driver Complement :Two 4-1/2 inch high resolution bass/midrange drivers; Two 1 inch ferromagnetic fluid damped moving coil pure aluminum dome tweeters
Frequency Response :52 Hz – 30 kHz.
Impedance :Compatible with 8 Ohm outputs
Sensitivity :90 dB
Recommended Associated Amplifier Power :10 – 125 watts.
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Matte Black
Accessories :Keyhole Hanging Bracket
Packaging :Two to a carton
Weight | (Metric) :9 lbs | 8.6 kg
Warranty :5 Years |
T101 / T101c
Design Two-way closed box
Drive units 115mm (4.5in.) dual layer MF
25mm (1in.) aluminium HF
Frequency response 80Hz - 30kHz
Crossover frequency 1.7kHz
Amplifier requirements 10 - 100 W
Sensitivity (2.83V/1m) 90dB (wall mount)
87dB (floor stand mount)
Maximum output (SPL) 107dB
Impedance 8Ω
Internal volume 0.7 Litres
Weight 1kg (2.2lbs)
Dimensions
(H x W x D) 330* x 140 x 35 mm
(13.0 x 5.5 x 1.4 in.)
Dimensions
(H x W x D)
centre mode 140 x 330 x 35 mm
(5.5 x 13.0 x 1.4 in.)
Finish Black
* Height of satellites will increase by 30mm when using supplied desk stand
Not all models / finishes are available in all markets. Contact your local dealer for specific range details.
T-2
Design Closed box powered subwoofer
Drive units 1 x 250mm (10in.)
Frequency response 30Hz - 250Hz
Amplifier 250 Watts built-in Class-D
Maximum output (SPL) 110dB
Low pass filter variable Fixed 250Hz, 2nd-order
Low level signal inputs RCA phono socket
Internal volume 12.7 Litres
Power requirements 100 - 240 V ac ~ 50/60Hz
Power consumption 250VA
Weight 13kg (28.6lbs)
Dimensions
(H x W x D) 380 x 370 x 177 mm
(15.0 x 14.6 x 7.0 in.)
Finish Black
Not all models / finishes are available in all markets.
Contact your local dealer for specific range details.
| Versatile High Performance Sound, Anywhere in Your Home
Use the compact, high performance OWM3 to bolster your multi-zone home sound system. It can be an on-wall surround speaker for a compact home theater system in a small to mid-sized room. It can be part of a desktop stereo setup for extreme gaming or computer-based video applications. The OWM3 goes practically anywhere a speaker can go and does practically anything a speaker can do. That's how versatile the OWM3 is.
OWM3 Features:
- More versatile mounting options than any other loudspeaker, with a modular, removable, switch-around base and built-in keyhole slots.
- Mounting Options: 1. Angled wall mount 2. Corner mount 3. Horizontal wall mount 4. Vertical wall mount 5. Shelf mount 6. Horizontal shelf mount 7. Use an optional articulating bracket (such as OmniMount 10.0 not included) for ceiling or swiveled wall use.
- (If you can think of any more, please let us know!)
- The OWM Series is timbre-matched to other Polk loudspeakers, so you can mix and match them to build or add to existing systems.
- Dynamic Balance® composite cone drivers are lightweight and stiff, with excellent damping qualities, for high efficiency, excellent mid-bass and low distortion even at extreme volume levels.
- Patented Dynamic Balance materials technology tunes out cone resonances before they become a part of the finished product, so you only hear the most realistic, natural audio reproduction.
- Durable, high performance fabric dome tweeters deliver clear and detailed high frequency response and excellent imaging.
- Capacitive Coupling Technology (CCT), an advanced signal-blocking technology that overcomes the usual limitations of small-enclosure loudspeakers (slim dynamics and no low frequency response), delivers extended dynamic range and enhancing deep bass response for clear, detailed musicality with little or no coloration.
- Glass-filled ABS enclosure is super-dense and acoustically inert, ensuring an extremely clean and low coloration midrange response.
- Paintable white finish blends into any decor.
- 5-way gold-plated binding posts, for the best connections, are easily accessible no matter how you mount the speaker.
Overall
Accessories
- Included Accessories
- (1) Grille
- (1) Removable Base
Warranty
- Cabinet Warranty5 years
- Drivers Warranty5 years
- Original Purchaser OnlyYes
Shipping Cartons
- Carton 1 11.25" (28.58 cm) h x 11" (27.94 cm) w x 11" (27.94 cm) d - 10.5 lbs (4.76 kg)
Multi-Application Loudspeaker
- Qty Included Pair
- Availability US
- Orientation
- Height10" (25.4 cm)
- Width7" (17.78 cm)
- Depth4" (10.16 cm)
- Weight4 lbs (1.81 kg)
- Front Array Driver Complement
- (1) 4.5" (11.43 cm) d (Round) - Mid/Woofer
- (1) 1" (2.54 cm) d (Round) - Tweeter
Audio Quality
- Total Frequency Response80 Hz → 25 kHz
- Sensitivity (1 watt @ 1 meter)89 dB
- Lower and Upper -3dB Limits100 Hz → 22 kHz
Angled Wall Mount Mount
- Mounting TypeKeyhole Hanger
- Available Orientations
- Mounting Location
- Back of Speaker
- Bottom of Speaker
Near: Bottom, Center
Swivel Wall/Ceiling Mount Mount
- Mounting Type1/4" 20 Threaded Insert
- Available Orientations
- Mounting Location
- Back of Speaker
- Bottom of Speaker
Near: Bottom, Center
On-Shelf Mount
- Mounting TypeKeyhole Hanger
- Available OrientationsHorizontal
- Mounting LocationBack of Speaker - Near: Center
Corner Mount Mount
- Mounting TypeKeyhole Hanger
- Available Orientations
- Mounting Location
- Back of Speaker
- Bottom of Speaker
Near: Bottom, Center
External Amplifier
- Recommended Amplifier Power Per Channel 20 watts → 100 watts
Inputs
- Audio Inputs
- Speaker Inputs (1) 5-way Binding Posts - Gold-Plated
|
Reviews
There are no reviews yet.