Product details Banana D.I. had been developed to pack all the necessary tools you expect from a professional direct injection box in a unique, smart cocktail of convenience, toughness and audio performance. Maintaining the highest possible audio signal integrity through each and every stage of your gain structure. No weak links, no level drops, frequency […]
Banana D.I.
had been developed to pack all the necessary tools you expect from a professional direct injection box in a unique,
smart cocktail of convenience, toughness and audio performance.
Maintaining the highest possible audio signal integrity through each and every stage of your gain structure. No weak
links, no level drops,
frequency attenuation, radioelectrical interference or impedance mismatch are acceptable for your live performance
or studio setup.
No more loud “pops, hums, hisses or clicks”, no more running back and forth from Stage to FOH in a desperate search
for the source of such problems. Record critical tracks live or in the studio with total confidence.
Dimensions:
175x60x140mm / 6,89×2,36×5,51in
Power:
48V phantom power
Case construction:
1.4 mm steel, black coated corners
Frequency response:
25 Hz – 21 kHz (0 dB / -3 dB)
Max. Input level:
+ 11 dBu without attenuation, +26 dBu with att.
Max. output level:
+ 11 dBu
S/N ratio, input connected:
– 66 dBu
Input impedance:
1,6 M-Ohm in 0 dB pos.,
27 k-Ohm in -15 dB pos.
Attenuation “Mute” activated:
– 42dBu
Input Connector:
Neutrik TRS
Output Connectors:
Neutrik TRS
Neutrik XLR
Weight:
0,830kg / 1,83lb
Weight
0.80 kg
Reviews
There are no reviews yet.
Be the first to review “MONKEY BANANA ACTIVE D.I BOX” Cancel reply
Banana D.I.
had been developed to pack all the necessary tools you expect from a professional direct injection box in a unique,
smart cocktail of convenience, toughness and audio performance.
Maintaining the highest possible audio signal integrity through each and every stage of your gain structure. No weak
links, no level drops,
frequency attenuation, radioelectrical interference or impedance mismatch are acceptable for your live performance
or studio setup.
No more loud "pops, hums, hisses or clicks”, no more running back and forth from Stage to FOH in a desperate search
for the source of such problems. Record critical tracks live or in the studio with total confidence.
Dimensions:
175x60x140mm / 6,89x2,36x5,51in
Power:
48V phantom power
Case construction:
1.4 mm steel, black coated corners
Frequency response:
25 Hz - 21 kHz (0 dB / -3 dB)
Max. Input level:
+ 11 dBu without attenuation, +26 dBu with att.
Max. output level:
+ 11 dBu
S/N ratio, input connected:
- 66 dBu
Input impedance:
1,6 M-Ohm in 0 dB pos.,
27 k-Ohm in -15 dB pos.
Attenuation "Mute” activated:
- 42dBu
Input Connector:
Neutrik TRS
Output Connectors:
Neutrik TRS
Neutrik XLR
Weight:
0,830kg / 1,83lb
User´s Manual
LD Systems LDI02
DI Box active
Active DI box in a sturdy metal housing (aluminium/steel) with protective corners, silver-blue metallic, internal battery (9 V flashes during operation) is switched off automatically when phantom power is used (LED permanently illuminated),
extremely low battery consumption. Battery: 9 V block (not included).
Product type DI Boxes
Channels 1
Inputs 2
Input connectors 6.3 mm Jack , XLR
Max. input level + 10 / + 30 dBu dBu
Input impedance 1 M Ohm(s)
Outputs 1
THRU outputs/channel 1
Output connectors XLR
Frequency response 20 - 20.000 Hz
THDIndicators Power
Controls ground lift , Power
Operating voltage +48 V phantom power , 9 V block
Cabinet material metal
Cabinet surface painted
Width 135 mm
Depth 128 mm
Height 53 mm
Weight 0,645 kg
Inline Transformer IA-2
The model IA-2 line matching transformers !S designed to properly match a low impedance signal to a low impedance source. The advantage of "ground lift" switching allows to optmize hum problems.
Technical Data Frequency response 20 Hz - 20 KHz + 1 dB Impedance 600 : 600 Ohm THD K3 50 Hz = 0.5 % Level < + 6 dBm Weight 100 g Dimensions diameter 17 mm, lenght 115 mm
Active DI-Box SM-60
The electronic Direct-Injection Box SM-60 allows direct connection of electronic music instruments such as keyboards, synthesizers, electric and electronic pianos, etc. with mixing consoles in PA-systems and in recording studios. The SM-6 is designed for applications, where a passive DI-Box does not perfom satisfactorily, i.e., where the output level of a passive DI-Box is too low for the microphone input section of the mixing desk. Because the input impedance of the SM-6 is above 5 MOhm, instrument outputs are not loaded or in any other way adversely affected. The voltage ratio from input to output is 1: 1 and is always sufficient for connection with any microphone input. Input connectors are 1/4" phone jacks, output connector is a Switchcraft D3M; output is 600 Ohms, transformer balanced. The output level may in certain cases overload microphone inputs - the line input section of the mixing console must then be used for connecting the SM-6. The unit operates with a 9 V battery or phantom powering from 24 to 48 volts.
Technical Data
input impedance > 5 MOhm max. input impedance + 6 dBu, 1,55V ouptut impedance 600 Ohm frequency response 20 ... 20000 Hz, ± 0,2 dB gain 1 : 1 THD < 1 % at 30 Hz < 0,7 % bei 40 Hz powering 9-V battery (IEC 6LF22) or phantom power 24 ... 48 V. inputs two 1/4" phone jacks , unbalanced (one being used as output to instruments amp) outputs XLR, balanced pin 1 = ground, pin 2 = hot, pin 3 = cold case aluminium die-cast weight 240 g dimensions 113 x 71 x 37 mm
DOD AC 275 Active Direct Box with Switchable Ground Lift and Attenuator-2nd Hand-
The AC 275 is an active, phantom powered direct box. Unlike a passive DI where the frequency response of the signal can be altered depending on the connected impedance, an active DI buffers the input signal with an amplifier. This assures that the sound source will reach the mixer balanced and noise-free.
Housed in a cast alloy chassis, the AC 275 supplies two, high impedance, unbalanced 1/4" jacks and one low impedance balanced XLR jack. It operates with battery or phantom power.
Key Features
?
Active direct box
?
Allows a hi impedance unbalanced source to directly feed a low impedance balanced input
?
Flat frequency response
?
Connects guitar pickups, microphones or electric instruments to a recording or P.A. console without audio quality loss
2-channel passive DI box for line and loudspeaker levels. PAN-04 consists of a housing containing the equivalent of two PAN-01s, making it a dual channel passive DI box. This „stereo" configuration makes it ideally suited for use with certain keyboards and devices which have several outputs.ive DI box. Jack input with paralell „THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals.
Specifications
No. of channels: 2
Passive/Actibe: Passive
Transformer balanced: Yes
Attenuator: -30 dB
Input/Output Gain: -20 dB
Ground lift switch: Yes
Max Input Level: +54 dBu
Max Output Level: +4 dBu
Frequency Range 2K Source Imp. -1dB: 10 Hz - 40 kHz
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.