| Content |
Product details
MonkeyTree is the natural home for our species. The
Monkeys feel well while standing relaxed and decoupled
from the ground.
Our Monkeys love Heavy Metal - thats why we made the
Monkey Tree out of massive Material to guarantee a solid
stand.
One set contents 1 Pair of MonkeyTree
Weight: 12,1kgs / 26.7lb
Max. Load: 70kgs / 154lb
Dimensions (Plate): L240 x W165 x H793 mm
L9.44 x W6.5 x H31.22 in
The MonkeyTree is available with two different pipe-lengths. Please select between 750mm (29.53in) and 1000mm (39.37in)!
The MonkeyTree fits to Turbo 4, Turbo 5, Turbo 6 and Turbo 8.
|
Perfectly matchd speaker stand for
Studio Monitor 350 and Studio
Monitor 450
|
Sold in pairs, each PreSonus ISPD-4 isolation pad can be divided into halves and configured in several ways so you can use them with virtually any near-field studio monitors. For small, vertically placed speakers, use half of an isolator per side or employ the full pad, whichever works best. Place two half-pads side-by-side to accommodate larger speakers or horizontal placement.
The speakers shown on the photographs are sold separetely. |
49 Key Controller exclusive for Radias R Module
INPUT x2 (Volume/Expression SW)
OUTPUT x2 (Volume/Expression)
TUNER OUT (Signal from Input 1 only)
Volume: Input Impedance > 50k ohm,
Output Impedance
Minimum Volume 0%–50%
Expression: Minimum Volume (100k ohm, 0%–100%)
Dimensions: 4.5(W) x 11.8(D) x 2.7(H)in.
Weight 3 lbs.
| Palmer Monicon, and the volume is right!
With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal.
The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.
- Type: passive
- Number of channels: 2
- Number of inputs: 2
- Input connections: XLR Combo / 3.5mm stereo jack
- Input type: balanced/unbalanced
- Maximum input level: +20 dBu
- Input impedance: 10 kohms balanced/ 5 kohms unbalanced
- Number of outputs: 2
- Output connections: XLR/m, 3.5 mm stereo jack
- Output type: balanced/unbalanced
- Max output level: +20 dBu
- Output impedance: 600 ohms
- Frequency response: 10Hz - 40 kHz +/- 1 dB
- THD: 0,001 %
- Max. attenuation: 85 dB (attenuator), 112 dB (attenuator + mute)
- Controls: Attenuation, Mute, Mono
- Housing material: sheet steel/wood
- Housing surface: powder-coated
- Width: 164 mm
- Height: 62 mm
- Depth: 85 mm
| Palmer Monicon, and the volume is right!
With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal.
The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.
- Type: passive
- Number of channels: 2
- Number of inputs: 2
- Input connections: XLR Combo / 3.5mm stereo jack
- Input type: balanced/unbalanced
- Maximum input level: +20 dBu
- Input impedance: 10 kohms balanced/ 5 kohms unbalanced
- Number of outputs: 2
- Output connections: XLR/m, 3.5 mm stereo jack
- Output type: balanced/unbalanced
- Max output level: +20 dBu
- Output impedance: 600 ohms
- Frequency response: 10Hz - 40 kHz +/- 1 dB
- THD: 0,001 %
- Max. attenuation: 85 dB (attenuator), 112 dB (attenuator + mute)
- Controls: Attenuation, Mute, Mono
- Housing material: sheet steel/wood
- Housing surface: powder-coated
- Width: 164 mm
- Height: 62 mm
- Depth: 85 mm
|
Reviews
There are no reviews yet.