MONKEY BANANA TURBO 4 ACTIVE STUDIO MONITOR 50W -RED-

222.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Product details Woofer:    4-inch magnetically shielded polypropylene / ceramic membrane Tweeter:     1-inch silk dome tweeter Frequency response:    60Hz – 30kHz HF – Level:    -6dB ~ +6 dB variable at 10KHz LF – Level:    -6dB ~ +6 dB variable at 100Hz Crossover frequency:    3kHz LF – Amplifier Power:    30W HF – Amplifier Power:    20W Signal […]

 

Read more

Product details
Woofer:    4-inch magnetically shielded polypropylene / ceramic membrane
Tweeter:     1-inch silk dome tweeter
Frequency response:    60Hz – 30kHz
HF – Level:    -6dB ~ +6 dB variable at 10KHz
LF – Level:    -6dB ~ +6 dB variable at 100Hz
Crossover frequency:    3kHz
LF – Amplifier Power:    30W
HF – Amplifier Power:    20W
Signal HF / LF:    88dB / 92dB
THD + N @ Rated Power HF / LF:     0.06% / 0.03%
Inputs:    XLR/TRS – Neutrik® Combo-jack, RCA input, S/PDIF – RCA input for digital signal
Outputs:    S / PDIF – RCA jack for digital signal thru
Input Select:    Analog or Digital
Channel selection:    Left or Right (Digital input mode only)
Input Impedance:    20 kOhm balanced, 10 kOhm unbalanced
Input Sensitivity:    +4 dBu (Balanced), -10dBV (unbalanced)
Available colors:    Red, Black
Gross Weight:    6 kg / 13.2lb
Net weight:    4.5 kg / 9.9lb
Gross Dimensions:    L287 x B255 x H346 mm
L11,29 x W10,03 x H13,62 in
Net Dimensions:    L195 x W173 x H245 mm
L7,68 x W6,81 x H9,65 in

Weight 6.00 kg

Reviews

There are no reviews yet.

Be the first to review “MONKEY BANANA TURBO 4 ACTIVE STUDIO MONITOR 50W -RED-”

Your email address will not be published. Required fields are marked *

Quick Comparison

MONKEY BANANA TURBO 4 ACTIVE STUDIO MONITOR 50W -RED- removeGENELEC 8130A COMPACT 2WAY DIGITAL ACTIVE MONITOR removeMACKIE HR824mk2 2-Way High Resolution Studio Monitor removeADAM A7X Active Studio Monitor 100W removeADAM A8X Active Studio Monitor 150W removeADAM A3X Active Studio Monitor 25W remove
NameMONKEY BANANA TURBO 4 ACTIVE STUDIO MONITOR 50W -RED- removeGENELEC 8130A COMPACT 2WAY DIGITAL ACTIVE MONITOR removeMACKIE HR824mk2 2-Way High Resolution Studio Monitor removeADAM A7X Active Studio Monitor 100W removeADAM A8X Active Studio Monitor 150W removeADAM A3X Active Studio Monitor 25W remove
Image
SKUTURBO 4 RED8130A149.019A7XA8XA3X
Rating
Price 222.00 incl. GR VAT 725.51 incl. GR VAT 899.00 incl. GR VAT 765.00 incl. GR VAT 1,045.00 incl. GR VAT 365.00 incl. GR VAT
Stock

In stock

In stock

Available on backorder

In stock

Available on backorder

In stock

AvailabilityIn stockIn stockAvailable on backorderIn stockAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Product details
Woofer:    4-inch magnetically shielded polypropylene / ceramic membrane
Tweeter:     1-inch silk dome tweeter
Frequency response:    60Hz - 30kHz
HF - Level:    -6dB ~ +6 dB variable at 10KHz
LF - Level:    -6dB ~ +6 dB variable at 100Hz
Crossover frequency:    3kHz
LF - Amplifier Power:    30W
HF - Amplifier Power:    20W
Signal HF / LF:    88dB / 92dB
THD + N @ Rated Power HF / LF:     0.06% / 0.03%
Inputs:    XLR/TRS - Neutrik® Combo-jack, RCA input, S/PDIF - RCA input for digital signal
Outputs:    S / PDIF - RCA jack for digital signal thru
Input Select:    Analog or Digital
Channel selection:    Left or Right (Digital input mode only)
Input Impedance:    20 kOhm balanced, 10 kOhm unbalanced
Input Sensitivity:    +4 dBu (Balanced), -10dBV (unbalanced)
Available colors:    Red, Black
Gross Weight:    6 kg / 13.2lb
Net weight:    4.5 kg / 9.9lb
Gross Dimensions:    L287 x B255 x H346 mm
L11,29 x W10,03 x H13,62 in
Net Dimensions:    L195 x W173 x H245 mm
L7,68 x W6,81 x H9,65 in

The Genelec 8130A Digital Monitoring System has a 192 kHz/24 bit digital audio interface.
Due to its compact size, integrated construction, excellent dispersion and precise stereo
imaging, the 8130A is ideal for near field monitoring, mobile vans, digital audio workstations,
broadcast and TV control rooms, surround sound systems, home studios, multimedia
applications and also for use with computer soundcards. The Directivity Control Waveguide?
(DCW?) technology provides excellent frequency balance even in difficult acoustic
environments.
The integrated design allows the amplifiers and the drivers to be calibrated as a single unit,
eliminating the effects of component tolerances and ensuring consistent quality.
The all-aluminium Minimum Diffraction Enclosure? (MDE?) and advanced Directivity Control
Waveguide? (DCW?) technologies are carefully matched with advanced amplifier and electronics
circuitry. The low frequency response extends down to 55 Hz (-3 dB) while distortion is extremely
low due to a uniquely new rear reflex port design.
The 8130A has been specially designed to have a sufficient LF extension for most situations.
However if greater SPL's and a lower cutoff frequency are required, it can be complemented
with Genelec 7050B subwoofer.
The 8130A is very easy to set up and use, the only connections required are the mains supply
and the input signal. The female XLR input connector can be fed with either AES/EBU formatted
digital signal or analog line level audio signal. The Genelec 8130A automatically detects analog or
digital signals and directs them to the correct signal paths.

Technical Specifications
Input word length 16 - 24 bits
Input format AES/EBU
Digital input XLR female
Connector type 
Input Sampling rate
No de-emphasis  29 - 200 kHz
Input Sampling rate
Using de-emphasis 
Peak per pair with music material 108 dB SPL @ 1m
Drivers
Bass 5" magnetically shielded
Midrange -
Treble 3/4" metal dome, magnetically shielded
Crossover frequencies 3 kHz
Free field frequency
response 58 Hz - 20 kHz (± 2 dB)
Amplifier power /ch
Bass 40 W
Midrange -
Treble 40 W
Speaker dimensions (H x W x D)
mm 285 x 189 x 178 mm (Height with Iso-Pod? 299 mm)
inches 11 1/4 x 7 7/16 x 7 1/16" (Height with Iso-Pod? 11 13/16“)
Amplifier dimensions* (H x W x D)
mm Integrated in the speaker cabinet
inches 
Speaker weight 5.6 kg (12.3 lb)

Features of the HR824mk2 Studio Reference Monitor:

- High-resolution Active studio reference monitor
- Ultra-linear frequency response for accurate mix translation
- 8.75 in. high-precision, low-distortion LF transducer
- 1 in. titanium dome, ferrofluid cooled tweeter
- Optimized Waveguide for wide, even sweet zone
- Twin FR Series amps -- 150W for LF / 100W for HF
- Cast aluminum Zero Edge Baffle minimizes diffraction
- Full internal damping eliminates midrange artifacts
- Onboard passive radiator extends bass response to 35Hz
- Acoustic Space, LF roll-off, and HF controls
- Balanced XLR, TRS, and unbalanced RCA inputs
- OmniMount ready for easy wall/ceiling placement
- THX pm3 certified for surround sound applications
- Perfect for High Definition audio, cinema and gaming systems

 

Dimensions and Weight in PackagingShipping Weight: 41 lbs Shipping Dimensions: 14 x 18 x 22 in

 

PRICE PER UNIT

ADAMs A7 & A7X: the evolution of a legend

The predecessor to the A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the worldʼs largest internet forums. Still today, the A7 are the reference monitors in many smaller studios.

With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level.

Driver technology

The first aspect that distinguishes the old from the new model is the X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels.

The perfect integration with the lower frequencies has been achieved with a newly designed 7” midwoofer. It has been redesigned with a much bigger voice coil (1.5”) and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

On the rear panel are several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Mid-Woofer
Number1
Basket Ø7" (175 mm)
Voice coil Ø1.5" (38 mm)
Cone materialCarbon/Rohacell/Glass Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypePWM
Amp. power RMS / music100 W / 150 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response42 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥106 dB
Max. peak≥114 dB
Crossover frequencies2500 Hz
Input impedance30 KOhm
Weight20.3 lb (9,2 kg)
Magnetically shieldedNo
Height x Width x Depth13.5" (337 mm) x 8" (201 mm) x 11" (280 mm)
Warranty5 Years
Delivery contents

Power cord, Manual


 

PRICE PER UNIT

The most powerful AX monitor

With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.

The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.

Cabinet- and bass reflex-construction

Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.

Amplification and controls

With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.

On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.

Review: A8X: a "powerful link" between near- and midfield monitors!

"The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010)

Mid-Woofer
Number1
Basket Ø8.5" (220 mm)
Voice coil Ø1.5" (38 mm)
Cone materialCarbon/Rohacell/Glass Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypePWM
Amp. power RMS / music150 W / 225 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response38 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥112 dB
Max. peak≥120 dB
Crossover frequencies2300 Hz
Input impedance30 KOhm
Weight28.7 lb (13 kg)
Magnetically shieldedNo
Height x Width x Depth15.5" (400 mm) x 10" (255 mm) x 12.5" (320 mm)
Warranty5 Years
Delivery contents

Power cord, Manual



PRICE PER UNIT

The smallest big sound ever...

With the A3X, ADAM Audio present their smallest monitor to date, making it perfectly suited for all environments where space is limited but sound shouldnʼt be constricted. The A3X combines a tiny footprint with the much acclaimed ADAM sound quality by using the X-ART tweeter for the higher frequencies, a guarantee for crystal clear music reproduction.

A 4.5” (basket) driver handles the lower registers. The diaphragm is made from carbon fiber, a material that is very light but very stiff and therefore capable of delivering colouring-free sound. Two built-in 25 Watt amplifiers powers each of the drivers directly.

Stereolink

A very handy and exclusive technology found in the two smaller AX monitors is the Stereolink. This is accomplished by a pair of additional RCA connections that allow for a bypass of the second stereo channel to the other speaker.

This new technology connects two A3X speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakerʼs gain control. This makes the A3X a natural for "mixer-less” desktop applications where overall system volume needs to be adjusted easily.

Controls and Connectors

The front of the A3X sports dual ports for surprisingly low frequency response down to 60Hz. The front panel also has power and gain controls. The rear panel includes a tweeter gain control as well as balanced (XLR) jacks and unbalanced (RCA) jacks, allowing for greater connection flexibility. There are also two M6 (6 mm) metric screw threads for stand/wall mounting.

Review: "Highly recommended“

"Iʼve used various monitors for my computer work before, but never of the caliber of the A3X series. Before these, I would have to redo my mixes significantly when transitioning from the small cheapies to the big 'real ones'. The ADAM Audio A3Xʼs save me a step by providing both great sound in a compact format and by changing mundane audio task-work into a quality listening experience. If you use good monitors from the outset, youʼll learn your music that much faster so that when it comes time for mixdown and mastering on your big boxes, youʼll already be acclimated to your songʼs subtler sonic aspects—aspects revealed only by the A3Xʼs with their sweet, smooth top end, and impressive handling of bass frequencies. Highly recommended.“
(Jon Chappell, Harmony Central, 03/10)

Review: "...one of the best compact monitors“

"ADAM´s A3X as the smallest monitor with a X-ART tweeter to date has convinced us in every respect. It´s one of the best compact monitors we have ever reviewed and with its almost shameless low price it´s worth every penny. (Professional Audio, 05/10)

Mid-Woofer
Number1
Basket Ø4.5" (120 mm)
Voice coil Ø1" (25 mm)
Cone materialCarbon Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypeA/B
Amp. power RMS / music25 W / 40 W
Tweeter1
TypeA/B
Amp. power RMS / music25 W / 40 W
Control panel
Input Sensitivity-∞ to +14 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response60 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.8 %
Long term output≥98 dB
Max. peak≥106 dB
Crossover frequencies2800 Hz
Input impedance10 KOhm
Weight10.1 lb (4,6 kg)
Magnetically shieldedNo
Height x Width x Depth10" (252 mm) x 6" (150 mm) x 7.5" (185 mm)
Warranty5 Years
Delivery contents

Cinch-cable, Power cord, Manual

Weight6.00 kg8.60 kg15.00 kg10.00 kg13.00 kg5.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 6.00 kg
Weight 8.60 kg
Weight 15.00 kg
Weight 10.00 kg
Weight 13.00 kg
Weight 5.00 kg