| Content |
Active subwoofer.
BX151A is extraordinarily powerful in relation to its size. Like the other models in the series, BX151A stands for high performance, for the high quality of materials and components as well as for the use of cutting-edge design techniques.
Suitable for both indoor and outdoor, concert halls, theaters and clubs of medium size, is perfectly matched to the self-amplified speakers Montarbo and beyond.
- Amplifier that uses an amplifier MOSFET Class AB delivers a power output of 500 watts and includes a driver circuit newly developed, offering excellent dynamic and tonal with the lowest possible distortion.
- DECo (Dynamic EQ. Controller): sophisticated and exclusive system speaker protection
- Electronic crossover stereo bypassed for wide-band use
- 127 dB max SPL.
- 15 "woofer, high efficiency, with 3" voice coil, built on our specifications, allowing greater power handling, at the same time, lower the temperature of the coil thus ensuring reliability margins.
- Cabinet birch plywood protected by a scratch-resistant paint and is equipped with two side handles.
- Flange to support the system via satellite rod connector (optional) mod. SM4.
APPLICATIONS
- Suitable for both indoor and outdoor
- Concert Halls
- Theatres
- Club medium-large
|
The dB1500a is a self-powered subwoofer featuring a heavy-duty 15" low frequency driver with butyl surround, complemented by a 1000 Watt power amplifier. The dB1500a provides an active stereo crossover with high-passed output for running your satellite speakers. Constructed of solid 3/4 inch plywood, with steel corners, tough carpet covering and large casters. The sub-woofer features large metal grab handles and a 35mm pole mount receptacle. In fixed installation systems, the dB1500a provides super tight low frequency output in a relatively small, unobtrusive enclosure. Perfect for any sound reinforcement system where low-end is desired.
Heavy-duty, 15-inch Low Frequency Transducer
Built-in Amplifier Delivers 1000 watts of Program Power
Variable Stereo Crossover with Balanced High Pass Outputs for Satellite Speakers
Heavy-Duty, Rear Mounted Casters
Extra Large Grab handles and 35mm Pole mount receptacle
3/4" Internally braced, plywood construction
Covered in tough carpet, with steel corners
|
15" Powered Subwoofer
- QuickSmartDSP features best-in-class processing, EV’s signature single-knob user interface, and intuitive menu navigation via LCD.
- Cardioid Control Technology allows output to be steered towards the audience with up to 35 dB reduction on stage when multiple subs are deployed.
- High-efficiency 1300 W Class D power amplifier delivers up to 133 dB peak SPL on the EKX-15SP utilizing high-sensitivity transducers designed and engineered by EV.
- Intelligent thermal management with a variable-speed fan controlled by multiple onboard sensors, ensuring superior performance and reliability in demanding environmental conditions.
- Two XLR outputs for easy system expansion to additional loudspeakers or subwoofers. Large slot ports for low distortion and excellent bass extension. Metal grille reinforcement bar (two on the 18SP). M20 threaded pole mount plate.
| Width |
530mm (20.87“) |
| Height |
455mm (17.91“) |
| Connector Type |
(2) XLR/TRS combo jacks and (2) XLR link outputs |
| Enclosure Material |
15 mm, plywood with EVCoat |
| Family |
EKX |
| Frequency Response (-3 dB) |
45 Hz - 150 HzkHz (Half Space Measurement) |
| Grille |
18 AWG steel with powdercoat |
| LF Transducer |
EVS-15C 381 mm (15 in) |
| Low Pass Frequency |
Adjustable: 80 Hz, 100 Hz, 120 Hz, 150 Hz |
| Max. SPL/1m (calc) |
133dB |
| Maximum SPL |
133 dB peakdB (Maximum SPL is measured at 1 m using broadband pink noise at maximum output) |
| Power Consumption |
1.8 A (Current rating is 1/8 power) |
| Power Rating |
1300W |
| Powered or Passive |
Powered |
| Shipping Weight |
32.6kg (71.87 lbs) |
| Speaker Type |
Subwoofer |
| Woofer Size |
15inch |
| requency Range (-10 dB) |
40 Hz - 180 HzkHz (Half Space Measurement) |
| Weight Net |
26.2kg (57.76 lbs) |
| Depth |
551mm (21.69“) |
|
Specifications
|
| Professional 500-Watt powered subwoofer for PA applications. Powerful 15'' long-excursion transducer with high temperature voice coil provides incredibly accurate and pulse-pounding bass. Precise reproduction of ultra-low frequencies for "bulletproof" punch and impact. State-of-the-art 500-Watt Class-D amplifier with comprehensive over-excursion, thermal and clip limit protection. Built-in active stereo crossover provides high-pass filtered outputs for full-range loudspeakers. Tunable and switchable Bass Boost plus Phase switch for ultimate low-frequency performance. Variable High Cut control for perfect sound alignment. Subwoofer Level control to adjust the balance between subwoofer and the full-range speakers. Power, Signal and Clip LEDs for perfect monitoring. Intelligent limiter for maximum sound performance and woofer protection. Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption. Pole socket for mounting with commercial spacer poles. Ergonomically shaped handles for easy transport. Rugged steel grill for optimal speaker protection. Weight 33 Kgr. | The Italian Stage S115A 15" Active Subwoofer is ideal for adding powerful yet smooth bass to your live setup. It uses a 15" woofer driven by a 350W RMS class AB amplifier, resulting in 128 peak spl and a 20Hz to 120Hz frequency range. This results in a booming bass sound, that matches precise performance with a punchy sound. The S118A also has a control panel section, with controls for line level, a phase switch, crossover switch - activating a high pass filter for outputs - as well as ground switch.
| manufacturer |
ITALIAN STAGE |
| Warranty |
2 Years |
| Speaker Category |
SubWoofer |
| Speaker Type |
Active |
| Material of manufacture |
Wood Cabin |
| Total Power (Watt) |
350 |
| Woofer diameter (inches) |
15 |
| dB (max spl) |
128 |
| Weight (kg) |
22.5 |
| Frequency response (Hz) |
20 to 120 |
| Colour |
Black |
|
User's manual
LD Systems STINGER SUB 15 A G3
Active 15" bass-reflex PA subwoofer
- Active 15” bass reflex PA subwoofer
- High-efficiency 450 watts RMS digital power stage and 133 dB max. SPL
- 15” custom design woofer for extended low end down to 40 Hz
- DynX® DSP technology for distortion-free performance
- 80, 100 and 120 Hz low pass presets
- Cardioid subwoofer array presets
- Horizontal or vertical placement
- 18 mm birch ply cabinet with ultra rugged polyurea finish
- Ergonomic handles and stacking recesses for easy transport and setup
- Shock-resistant front grill provides maximum speaker protection
- Insert for M20 threaded poles
- Smart transport accessories
STINGER SUB 15 A G3
Engineered for rock-solid reliability day in, day out this active subwoofer is a truly professional performer. With built-in presets for quick system integration and a variety of cardioid array configurations it is completely user-friendly. The Stinger® SUB 15 A G3 is powered by high efficiency Class D amplification with a mighty 450 watts RMS output. It drives a custom designed 15” woofer delivering a huge bottom end with terrific punch and excellent definition. The Stinger® SUB 15 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance and pristine, distortion-free bass reproduction at all times. Designed to be a real workhorse throughout, the well-braced bass reflex enclosure is constructed for horizontal and vertical orientation. It is made of rigid 18 mm birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, M20 threaded pole insert, stacking recesses and ergonomic handles the Stinger® 15 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
Product type
PA subwoofer
Type
active
Low/mid driver dimensions
15 "
Woofer Size
381 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
3 "
Woofer voice coil (mm)
76.5 mm
Amplifier
Class D
RMS
450 W
Peak power
900 W
Frequency response
40 - 200 Hz
Max. SPL (peak)
133 dB
Protection circuits
DC , limiter , over voltage , short circuit
Input impedance
30000 Ohm(s)
Input sensitivity
0.3 V
Controls
Main Level , mode
Indicators
limit , mode , on , protect (protection circuit engaged) , signal
Line inputs
2
Line input connectors
6.3 mm Jack , XLR
Line outputs
2
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching) , SMPS
Power Consumption (max.)
600 VA
Operating Temperature
0 - 40 °C
Relative Humidity:
Cabinet material
18 mm Plywood
Cabinet surface
Polyurea
Cabinet construction
vented
Width
567 mm
Height
477 mm
Depth
624 mm
Weight
31,9 kg
|
Reviews
There are no reviews yet.