Content |
Two-way passivefull-range. 8 Ω.
8” woofer, 1” driver, 90° x 60° dispersion.
Power handling: 200 W.
Cabinet made of polypropylene.
|
Powerful monitor-speaker - Active speaker-system for direct connection with the signal source
- 2-way speaker-system
- Clear and powerful sound
- 2-band EQ master-signal and master-signal
- Wide range of uses in spite of minimum size
- Ideal for decentral sound-surroundings, e.g. in bistros, restaurants, bars or studio
- Delivery includes mounting bracket for ceiling or wall installation
Technical Information:
Power supply: | 230 V AC, 50 Hz ~ | Power consumption: | 125 W | Amplifier power: | 80 W | Components: | 8" woofer, 1 tweeter | Inputs: | 1 Line In | XLR | Outputs: | 1 Line Out | XLR | Max. SPL: | 90 dB | Impedance: | 8 Ohms | Frequency-range: | 40 Hz - 20 kHz | Dimensions (H x W x D): | 360 x 270 x 240 mm | Weight: | 8 kg (piece) |
|
The D 8 is a light-weight, robust 8“/1”, 2-way plastic cabinet for professional sound reinforcement applications. With a variety of suspension accessories and conservative cosmetics, the D 8 is ideally suited to be used in demanding fixed installations.
The cabinet is manufactured from ABS and therefore is extremely resistant against abuse on the road. For low and mid frequencies a DYNACORD DND8200-8 neodymium transducer is used. The Electro-Voice DH3 driver is used for the projection of the high frequencies. The Constant-Directivity HF horn has been integrated into the baffle by CAD methods. The nominal coverage angle of the cabinet is 90°*90°, horizontal*vertical, respectively.
Power handling of the cabinet is 250 W (rated) and 1000W (peak). The maximum sound pressure level is 124 dB, the frequency range of the D 8 is from 65Hz to 20kHz. The D 8 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in high-performance small-format active and passive satellite systems.
Every transducer is protected against short-term thermal overload with thermal cutout switches and halogen protectors. In case of a potential thermal overload the power applied to the speakers is reduced to a safe level. The protection exhibits ʽsoftʼ switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value.
Extremely durable acoustic foam mounted to a strong powder-coated steel grille protects the loudspeaker components against any mechanical damage. The trapezoidally shaped enclosure also allows employing the cabinet in monitoring applications. A stable, integrated carrying handle and the integrated stand socket for pole-mount stands allow easy transportation and set-up. A protective cover is available as an optional accessory.
|
50The AC18/26 is a compact, fullrange loudspeaker system designed to provide maximum bandwidth and SPL in a single system package and be visually unobtrusive. The enclosure design allows for installation very close to walls and ceilings, making it ideal for installation under balconies, columns, or for wall mounting. The high frequency device is a 1" exit compression driver integrated into a 120° x 60° rotatable PT™ (Progressive Transition) waveguide that provides even coverage throughout the intended listening area. The AC18/26 utilizes a 8" Symmetrical Field Geometry (SFG™) LF Transducer with a copper-clad aluminum edge wound 2.5" voice coil and a copper-capped pole piece that improves performance by reducing voice coil inductance and distortion.
The multi-ply hardwood enclosure is designed to work in the vertical plane as well as in the horizontal plane. Mounting points are provided for an optional U-bracket and for an OmniMount® type bracket. The AC18/26 is also equipped with attachment
points located on the bottom of the enclosure for a stand mount accessory. The plywood enclosure features JBLʼs DuraFlex™ finish and comes with a powder coated steel, foam-backed grille.
Features:
1" Exit Compression Driver with 120° x 60° Coverage PT™waveguide.
8" (205 mm) LF transducer
Compact enclosure
500W Program Power
Dual Neutrik NL4 connectors plus screw terminal
Attachment points for optional U-bracket, third-party OmniMount® typebracket and stand mount accessory.
Specifications:
Frequency Range (-10 dB): 47 Hz -20 kHz
Frequency Response (±3 dB):
f10, 52 Hz - 20 kHz
f3, 63 Hz – 19 kHz
Power Rating:
250W Cont. Pink Noise
500W Program
1000W Peak
Impedance: 8 Ohms
Coverage Pattern: 120° x 60°
Dimensions: 18.5" H x 9.4" W x 10" D (469.9 x 237.5 x 254mm)
Weight: 28.2 lbs. (12.8 kg)
|
* 90° x 50° Coverage, rotatable for use in either vertical or horizontal orientation.
* CMCD™ Cone Midrange Compression Driver provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.
* 2432H High-Frequency Compression Driver
* PT™ Progressive Transition Waveguide for excellent pattern control with low distortion.
* Bi-Amp/Passive Switchable.
* Optional planar array frame kits for a number of array configurations (see AE Series Array Guide).
Frequency Range (-10 dB) : 260 Hz – 20 kHz
Frequency Response (±3 dB) : 330 Hz – 18 kHz
Coverage Pattern : 90°x 50°, rotatable waveguide
Directivity Factor (Q) : 11
Directivity Index (DI) : 10.5 dB
Crossover Modes : Bi-amp/Passive switchable
Crossover Frequency : 2.2 kHz
Transducer Power Rating (AES) : MF: 350 W (1400 W peak), 2 hrs
HF: 100 W (400 W peak), 2 hrs
Long-Term System Power Rating (IEC) : MF/HF: 200 W (800 W peak), 100 hrs
Maximum SPL5 : Bi-amp mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
Passive mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
System Sensitivity (1W @ 1m) : Passive mode: 108 dB SPL
Nominal Impedance : 8 ohms
Midrange Driver : JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice-coil internal driver
Sensitivity (1W @ 1m)
(Midrange) : 108 dB SPL
High Frequency Driver : JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
Sensitivity (1W @ 1m)
(High Frequency) : 113 dB SPL
Waveguide : PT-K95MH
Enclosure : Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment : 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish : Black DuraFlex™ finish.
White available upon request.
Grille : Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector : NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications : Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in vertical cabinet orientation) : 548 x 561 x 657 mm
(21.6 x 22.1 x 25.9 in)
Net Weight : 27.2 kg (60 lb)
Optional Accessories : M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.
|
The P4228 is a weatherproof full range, wide-dispersion, two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications.
The high frequency section is a constant directivity CMD horn loaded with a 1.4” RCF Precision Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a double 8” woofer with a 2.5” voice coil. The cabinet is asingle piece rotational moulded in medium density polyethylene, full UV protected. The cabinet is equipped with 4 x M8 brass inserts, a stainless steel U-Bracket. The front logo is in aluminium and rotatable. The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing. P 4228 is suitable for indoor and outdoor applications/installations, it meets the requirements of IP 55 code (International Protection Rating).
Features |
---|
Weatherproof cabinet IP 55 | Aluminium grill and stainless steel bracket | Two 8" high-output LF transducer with 2.5" voice coil | Once RCF Precision Neodymium 1.4" Compression Driver with 2.5" voice coil | 110° x 60° constant directivity horn | Built in passive crossover | 2° x 15° enclosure sides for array configurations | Active Mosfet Compression Driver Protection |
LICC (Low Impedance Compensated Crossover) network
Acoustical Specifications |
---|
Frequency Response -10 dB: | 80 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 100 Hz | ÷ 20 kHz | Max SPL @ 1m: | 129 dB | | Horizontal coverage angle: | 110° | | Vertical coverage angle: | 60° | | Directivity index; Q: | 9 | | System Sensitivity: | 97 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 400 Watt | | Peak Power Handling: | 1600 Watt | | Recommended Amplifier: | 800 | | Protections: | Dinamyc | | Crossover frequencies: | 1100 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 1.4“(35.5mm) throat, 2.5" (63.7 mm) coil diaphragm assembly | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 90 Watt AES | | Sensitivity: | 110 dB | | Woofer: | 2x8" (200 mm) woofer with 2.5" (64 mm) coil | | Nominal Impedence: | 16 Ω | | Input Power Rating: | 300 Watts AES | | Sensitivity: | 95 dB | |
INPUT SECTION |
---|
Input connector: | 4 pole Amphenol | |
CABINET |
---|
Cabinet Material: | 8 mm Polyethylene rotomoulded | | Hardware: | 4 x M8 + U-bracket and pair of spacers | | Grille: | Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing | | Colour: | Gray | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 268 / 10.55 mm/inch | | Width: | 566 / 22.28 mm/inch | | Depth: | 250 / 9.84 mm/inch | | Net Weight: | 13.5 / 29.7 Kg/Lbs |
|
|
Reviews
There are no reviews yet.