| Content |
ActiveSubwoofer. 500 W.
12” woofer. Built-in stereo Xover.
500 W class-D power amplifier.
Optional: S/203 satellite supporting pole. |
From rock band to club DJ, StageSource™ L3s is a high-powered subwoofer designed to deliver best-in-class low-end performance - whatever the application.
Designed for the widest range of scenarios, Line 6 Smart Speaker modes allow you to configure the subwoofer output to deliver the perfect low-end performance at the touch of a button. Whether you need a huge punchy kick and bass for a live rhythm section, or deep sub-bass lows for use in a DJ rig, Smart Speaker modes make setup simple and deliver stunning sound in every application.
In live sound situations where two or more speakers are needed, StageSource products use a proprietary digital networking protocol called L6 LINK™ to simplify setup. Loudspeakers will automatically self-configure, pan stereo signals, adjust Smart Speaker modes and perform system-wide optimization. Add StageSource L3s subwoofers to the mix and the system automatically sends them the summed signals and sets the crossovers. When combined, Line 6 live sound products form an intelligent ecosystem that sets up faster and helps you sound your best.
| Cabin Type: | Wooden subwoofer | | Amplifier: | 1,200‐watt | | LF/MF, Woofer: | 2x12” | | DSP Processor: | Yes | | Frequency Response: | 38 Hz to 910 Hz | | Dimensions: | 419 mmx867 mmx591 mm | | Weight: | 37.5 kg | | Color: | Black |
| What is Class-D Technology?
Instead of operating relatively continuously like Class AB circuits, Class-D amps switch on and off thousands of times per second, delivering power only when needed. The amplifier is either fully on or fully off, which significantly reduces power losses from the output devices given off as heat. Less heat means our Class-D amps don't need massive heat sinks, and that means we can make them lighter. Plus B1200D's amplifier provides all the dynamic punch and fidelity you'd expect from a much larger, more expensive subwoofer.
Custom-Designed Transducers
The transducers (woofers and tweeters) are the only part of a sound system you actually hear, so we never cut corners, and we never just grab whatever happens to be on the shelf. We custom-design our own so they are the perfect match for both the amplifier and the application. We wind our own voice coils, process the paper pulp into cones and even machine our own backplates. This enables us to control the quality, and frankly, make better components. The 12" long-excursion, low-frequency transducer was designed specifically for use in the EUROLIVE B1200D.
Take Control
The B1200D features balanced XLR inputs and outputs, as well as balanced XLR Thru jacks for connecting additional enclosures. A Boost Frequency knob lets you boost any frequency between 45 Hz and 90 Hz. Then just flick the Boost switch to give your selected frequency a +10 dB boost. We've also provided a High Cut dial that controls the upper-corner frequency for the internal amplifier without affecting Thru A/B signals. A Level knob controls the input gain, and the Phase switch reverses the output phase to compensate for frequency cancellation between the subwoofer and satellite speakers. LEDs show operational status at a glance including power, signal present and input overloads.
Product Features:
- High-performance 500-Watt powered subwoofer for PA applications
- Powerful 12'' long-excursion transducer with high temperature voice coil provides incredibly accurate and pulse-pounding bass
- Precise reproduction of ultra-low frequencies for "bulletproof" punch and impact
- State-of-the-art 500-Watt Class-D amplifier with comprehensive over-excursion, thermal and clip limit protection
- Built-in active stereo crossover provides high-pass filtered outputs for full-range loudspeakers
- Tunable and switchable Bass Boost plus Phase switch for ultimate low-frequency performance
- Variable High Cut control for perfect sound alignment
- Subwoofer Level control to adjust the balance between subwoofer and the full-range speakers
- Power, Signal and Clip LEDs for perfect monitoring
- Intelligent limiter for maximum sound performance and woofer protection
- Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption
- Pole socket for mounting with commercial spacer poles
- Ergonomically shaped handles for easy transport
- Rugged steel grill for optimal speaker protection
- High-quality components and exceptionally rugged construction ensure long life
|
- 2 CHANNELS INPUT & OUTPUT
- Woofer 12”
- RMS Power 350W CLASS AB Amplifier
- Peak power 700W
- Frequency range 40Hz-120Hz
- Peak spl 126 dB
- Power supply AC110V/AC230V
MODEL IS S112A
System type Vented enclosure subwoofer
LF CONE 12“
LF VOICE COIL 2“VC
LINE INPUT 2 x XLR-F IN
LINE OUTPUT 2 x XLR-M OUT
CROSSOVER OUTPUT FLAT or 100 Hz High-Pass
RMS POWER 350 W
PEAK POWER 700 W
FREQUENCY RESPONSE 40hz-120khz
PEAK SPL 126 dB
DIMENSIONS 42x51x40 cm (WxHxD)
WEIGHT 21 Kg
|
Need a powerful bass enhanced system that wonʼt completely fill your van?
The ART 902-AS active subwoofer is what youʼre looking for.
Thanks to the newly designed 12” high power neodymium woofer it delivers granite like bass punch for any kind of application in a compact and easy to transport enclosure.
The cabinet is made in Baltic Birch and heavy duty painted to withstand the life on the road.
| Acoustical Specifications |
|---|
| Frequency Response -3 dB: | 45 Hz | ÷ 120 kHz | | Max SPL: | 130 dB | | | Woofer: | 12“, 3" v.c. | |
| INPUT/OUTPUT SECTION |
|---|
| Input signal: | Bal / unbal | | | Input connectors: | Stereo combo xlr-jak | | | Output connectors: | Stereo xlr | | | Input sensitivity: | -2 dBu / +4 dBu | |
| PROCESSOR SECTION |
|---|
| Crossover frequencies: | 80 - 120 Hz | | | Protections: | Thermal, rms | | | Limiter: | Limiter | | | Controls: | Volume, phase, xover | |
| AMPLIFIER SPECIFICATIONS |
|---|
| Total power: | 1000 Watts | | | Low frequencies: | 1000 Watts | | | Cooling: | Convection / forced | | | Connections: | VDE connector in / out | |
| CABINET |
|---|
| Cabinet Material: | Balitc birch | | | Handles: | 2 on side | | | Pole Mount/Cap: | Yes | | | Colour: | Black | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 515 / 20.27 mm/inch | | | Width: | 410 / 16.14 mm/inch | | | Depth: | 550 / 21.65 mm/inch | | | Net Weight: | 29.6 / 65.25 Kg/Lbs |
|
| Frequency response (-3 dB) |
43 Hz-20 KHz |
| Frequency range (-10 dB) |
37 Hz-20 KHz |
| Maximum SPL |
127 dB |
| Coverage (H x V) |
120° x 40° |
| Amplifier rating |
1000 W |
| LF channel rating |
500 W |
| HF channel rating |
500 W |
| Crossover frequency |
200 Hz |
| Connectors |
2x XLR/TRS Combo Jack Input
1x 3.5 mm Input
1x Stereo RCA Input
1x Wireless Bluetooth® Audio Input
1x XLR THRU Output
1x XLR MIX OUT Output |
| Enclosure |
Sub: 15 mm plywood
Column: Composite
Pole: Aluminum |
| Grille |
Steel with black or white powder coat |
| Color |
Black or white |
| Dimensions (HxWxD): mm (in) |
Sub: 530 x 345 x 471 (20.9 x 13.6 x 18.5)
Column: 825 x 102 x 172 (32.5 x 4.0 x 6.9)
Pole: 929 x 48.5 x 55 (36.6 x 1.9 x 2.2) |
| Net weight |
Sub: 44.66 lb (20.3 kg)
Column: 10.34 lb (4.7 kg)
Pole: 2.75 lb (1.25 kg)
Sub cover: 0.9 lb (0.4 kg)
Bag for column and pole: 1.87 (0.85 kg) |
| Shipping weight |
Sub box: 50.71 lb (23 kg)
Column box: 18.30 lb (8.3 kg) |
| Power consumption3 |
100-240 V AC, 50-60 Hz, 1.5-0.6 A |
|
Reviews
There are no reviews yet.