Content |
It is a two-way speaker with 5” woofer and waveguide-loaded dome tweeter to ensure intelligibility and correct dispersion of the sound over a wide angle of coverage.
The built-in support makes the MQ50 easy to install and enables close fitting to the wall, limiting its protrusion.
The exclusive attachment system designed for the MQ50 model allows the installer to fit the attachment bracket to the wall and make the electrical connections during the pre-installation phase; subsequently, when all the works are completed, the MQ50 is positioned, oriented, and connected with a simple "click”, without the need for tools.
Acoustical Specifications |
---|
Type Of Speaker: | 2 way bass reflex speaker | | Frequency Response: | 70 Hz | ÷ 20 kHz | Max SPL @ 1m: | 110 dB | | Horizontal coverage angle: | 120° | | Vertical coverage angle: | 90° | | Power Handling: | 60 Watt RMS | | Peak Power Handling: | 120 Watt PEAK | | System Sensitivity: | 89 dB | | Impedance: | 16 Ω | | Crossover frequencies: | 4.5 Hz | |
TRANSDUCERS |
---|
Speaker: | 5“ | | Tweeter: | 0.75“ | |
INPUT SECTION |
---|
Input connector: | 2 euroblock | | Constant voltage: | 100 V, 70 V V | | Power Selection: | 30 - 20 - 10 - 5 W (100 V) | |
CABINET |
---|
Hardware: | Body in self-extinguishing plastic | | Colour: | White / Silver / Black | | Grille: | Steel | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 245 / 9.64 | | Width: | 165 / 6.49 | | Depth: | 175 / 6.88 | | Net Weight: | 2.63 / 5.79 | |
SHIPPING INFORMATION |
---|
Package height: | 300 / 11.81 | | Package width: | 235 / 9.25 | | Package depth: | 220 / 8.66 | | Shipping Weight: | 3.16 / 6.96 |
|
F-1000BTWP: 100V weather proof line full range speaker
Weather Proof version of the F-1000BT
IPX4 Water rated
Specification | Model F-100BTWP | Enclosure Type | Bass-reflex type | Rated Input | 15W | Impedance | 100V line 670Ω(14W), 2kΩ(5W),33kΩ(3W),10kΩ(1W) | Sensitivity | 87dB (1w,1m) | Frequency Responce | 85-20,000Hz | Crossover Frequency | 5kHz | Directivity Angle | Horizontal 90°, vertical 90° | Speaker Componenrs | Low frequency 10 cm cone type. High Frequency, Balanced dome tweeter | Input Terminals | Push-in terminal | Finish | HIPS, black | Dimensions | 130(W) × 202(H) × 131(D)mm | Weight | 2 kg (3.97 lb) (including the supplied brackets) | Accessories | Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 set, Terminal covers x 1, Terminal cover mounting screws. |
|
- For Shower Room / Pool.
- Low Input BGM / FGM (in compliance with IP-X4).
- Splashproof 360° Rotatable 5W Full-Range Sealed 10cm Speaker for Rainy or High Humidity Areas.
Specification |
| Type | Sealed type | Speaker | 10cm dynamic speaker | Rated Power | 5W
Impedance 2k Ω (5W), 3.3k Ω (3W), 5k Ω (2W) | Output Sound Pressure Leve | 90dB / W / M | Frequency Response | 120 ~ 18,000Hz | Operating Temperature Range | -20 ~ +55°C | Speaker Component | 12cm dynamic cone type speaker | Finish | Enclosure; Polypropylene, Grey / Grill; Aluminium, Grey. | Dimensions | (W x H x D) 198 x 177 x 159mm | Weight | 1.4kg |
|
The BS-633A/AT are wall-mount 5" (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The BS-633AT comes with a built-in attenuator and can be connected to 2-wire and 3-wire systems. The speakers are highly cost-effective and well-suited for BGM and announcement applications.
SPECIFICATIONS |
| BS-633A | | Rated Input: | 6W (100V line), 3W (70V line) | Rated Impedance: | 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 10kΩ(1W) | Sensitivity | (1W, 1m): 91dB | Frequency Response: | 120 – 15,000Hz (–20dB) | Speaker Component: | 5" (12cm) cone-type | Applicable Cable: | 600V vinyl-insulated cable (IV wire or HIV wire)Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16) | Connetion: | Push-in connector (bridging terminal) | Operating Temperature: | –10°C to 50°C (14°F to 122°F) | Finish: | Case: ABS resin, off-white | Rear bord: | Hard board | Dimensions: | 173 (W) × 195 (H) × 101 (D) mm(6.81" × 7.68" × 3.98“) | Wall Mounting Case front mount: | 184mm (7.24“) | Dimensions: | Fixing hole mount: 120mm (4.72“) | Weight: | 780g (1.72 lb) | Accessory: | Speaker mounting screw (4 × 35 (0.16" x 1.38“)) × 2, Speaker mounting screw (4 × 16(0.16" x 0.63“)) × 2 |
|
F-2000 Series indoor speaker designed to provide high quality sound and reliable performance for restaurants, retail and audio/visual applications. Features include two-way bass-reflex design, high impact polystyrene enclosure with an 8" low frequency driver and dome tweeter. For challenging acoustic environments, users can easily reduce the high frequency dispersion of F-2000 models by simply installing an included horn adapter. White, 70V.
Features:
- Compact box speakers for music and voice paging distribution
- Excellent sound quality
- Octagonal horn design for smooth coverage
- Adjustable high frequency dispersion
- Extruded cabinet design improves low frequency performance
- Individual protection circuit on each component
- Screwdriver-adjustable power taps
- Paintable grille and enclosure
- Wall/ceiling-mount bracket included
- Optional board, cluster and pole-mount brackets
- OmniMount-compatible (Series 20.5CA/WA)
- Optional subwoofers, model HB-1, FB-100 or FB-120
- Five year warranty
Specifications:
- LF Driver: 8” cone woofer
- HF Driver: 1” hard-dome tweeter
- Crossover: 2.5kHz
- Power Handling: 180W (cont. PGM), 60W (pink noise), 60W (70V transformer version)
- Sensitivity (1W, 1m): 93dB SPL
- Dispersion (adjustable):
110° H x 100 ° V
80° H x 80° V
| The BS-1034 and BS-1034S are wall-mount speakers matched with a supplied plug-in speaker bracket, for easy installation. The BS-1034/1034S combine a low-frequency 5" (12cm) cone-type speaker and a high-frequency balanced dome-type speaker. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. The speaker enclosureʼs design proportions are based on the Golden Ratio (1: 1.618). A low profile blends in well with room décor. Both vertical and horizontal installations are possible. Enclosure and grille net colour is off-white, except on the BS-1034S, which comes with a silver net grille.
Speaker components: |
5" (12cm) cone-type + Balanced dome tweeter. |
Rated Input: |
100V Line 10W |
Impedance: |
100V LINE: 1kΩ (10W),2kΩ (5W) 3.3kΩ (3W),10kΩ (1W) |
Sensitivity: |
(1W 1m)9odB |
Frequency Responce: |
120-20,000Hz |
Input Terminal: |
Push-in terminal |
Finish: |
Cabinet: HIPS resin, off white, paintable.Grill: SECC, metallic paint.BS-1034S is finished silver metallic paint |
|
Reviews
There are no reviews yet.