IK MULTIMEDIA iRiG PRO DUO Universal dual channel audio/MIDI interface for iPhone, iPad, Android and Mac/PC

“Hey, Iʼve got an idea!” So youʼre hiking out in the middle of the woods. Maybe mountain climbing in the Himalayas with a Sherpa. Or youʼre on the tour bus at 3 am and canʼt sleep. And then…BOOM, an idea hits you. You stop everything, grab your guitar and your mic, plug them into your iRig Pro DUO, and then you plug it into your iPad. Or your Android. Or your computer.

You hit "Record,” and that idea that was once just floating around in your head is a song that you can upload for all your fans and followers to hear.

iRig Pro DUO is made for this. Itʼs made for you. Now you can truly go out and play and record anywhere, any time on any device with the smallest fully-featured dual-channel interface on the market.

• Truly mobile dual input audio interface for iPhone, iPad, Android, Mac and PC
• Simultaneous dual track recording interface for all instruments
• Ultra-compact housing for extreme portability
• Dual identical XLR/TRS combo input jacks
• Dual ultra-low noise studio-quality IK preamps
• Individual input gain controls
• 48V phantom power
• Self-powered (2 AA batteries), device powered or DC power adapter (not included)
• 24-bit AD-DA converters
• Dual 1/4” switchable TRS balanced outs
• 1/8” 3.5mm Headphone out w/ level control
• MIDI IN/OUT jacks
• Ultra-compact housing fits in the palm of your hand
• Comes with mini-DIN to Lighting, Micro USB OTG and standard USB cables
• Designed and made in Italy

Microphone Input

• Microphone Inputs: 2x balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
• Microphone Input Level: from 6 mVpp to 1.4 Vpp
• Microphone Input Impedance: approx 2 kOhms
• Gain Range: 48 dB
• Phantom Power: +48V ± 4V
• Frequency Response:
  • from 5 Hz to 21 kHz (-3dB) Gain @ min
  • from 30 Hz to 21 kHz (-3dB) Gain @ max
• Input Noise:
  • -103 dB(A) Gain @ min
  • -86 dB(A) Gain @ max

Instrument Input

• Instrument Inputs: 2x unbalanced, Hi-Z, TS 1/4” Jack, Tip: signal / Shield: ground
• Instrument Input Level: from 30 mVpp to 6.9 Vpp
• Instrument Input Impedance: 1 MOhms
• Gain Range: 27 dB
• Frequency Response:
  • from 2 Hz to 21 kHz (-3dB) Gain @ min
  • from 5 Hz to 21 kHz (-3dB) Gain @ max
• Input Noise:
  • -104 dB(A) Gain @ min
  • -102 dB(A) Gain @ max

Line Output

• Line Outputs: 2x balanced, TRS 1/4” Jack, Tip: hot / Ring: cold / Shield: ground
• Floating Balanced Outputs with automatic level compensation when working in unbalanced mode
• Maximum Output Level: +16 dBu into 600 Ohms balanced load
• Instrument Input Impedance: 1 MOhms
• Frequency Response: from 10 Hz to 21 kHz (-3dB)
• Output Dynamic Range: 106 dB(A)
• Output Impedance: 150 Ohms balanced

Common

• AD and DA Resolution: 24-bit
• Sampling Rate: 44.1 kHz and 48 kHz
• Power: USB bus power, battery power (2xAA), or DC power supply (9VDC - 500mA min. positive outside - not included)
• Metering: Multicolor LED
• Size: 75mm/2.95" x 127mm/5" x 37mm/1.46“
• Weight: 197.2g/6.96oz (batteries excluded)
• Battery Life:
  • Recording - Max load*: 3 hours, 30 minutes (NiMH rechargeable); 45 minutes (Alkaline)
  • Playback - Min load**: 10 hours (NiMH rechargeable); 3 hours (Alkaline)

*Max load condition: both inputs connected to two 1,5mA phantom powered loads, input gains set to maximum, outputs set to maximum. 
**Min load condition is as follow: music playng, phantom power OFF.

• iRig Pro DUO universal dual channel Audio-MIDI interface
• Lightning to Mini-DIN connection cable (60cm/23.62“)
• Micro-USB-OTG to Micro-USB connection cable (60cm/23.62“)
• USB to Mini-DIN connection cable (60cm/23.62“)
• 2 x 2.5mm jack to MIDI cable (160cm/63“)
• 2 x 1.5V AA Battery

• Size: 75mm/2.95" x 127mm/5" x 37mm/1.46“
• Weight: 197.2g/6.96oz (batteries excluded)
• Lightning to Mini-DIN connection cable: 60cm/23.62“
• Micro-USB-OTG to Micro-USB connection cable: 60cm/23.62“
• USB to Mini-DIN connection cable: 60cm/23.62“
• 2.5mm jack to MIDI cable: 160cm/63“

Compatible with iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s*, iPhone 4*, iPod touch 5th generation, iPod touch 4th generation*, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad 4th generation, iPad mini, iPad 3rd generation*, iPad 2*, iPad*. iOS 5.1 or later is required.

* 30-pin to Mini-DIN cable (sold separately) is required

Mac®: Mac OS X 10.6 or later. One free USB port.

Windows®: Support using the ASIO4ALL driver on Windows XP/Vista/7/8. 

Compatible with Android devices that support Samsung Professional Audio technology, like the Samsung Galaxy S6, Galaxy S6 Edge, Galaxy Note 4 and Galaxy Note Edge. Samsung Galaxy S5 and Galaxy Note 3 require Android 5.

Compatible with Android devices with USB (OTG) connector running Android apps that use USB (OTG) audio input.

Compatible with any Android devices with USB (OTG) connector running Android 5.

Features

    Works on any smartphone or tablet that supports Android 4.2 or higher and host mode/USB OTG
    Works on Mac or PC via optional USB to Micro-USB cable.
    Near-zero latency digital FX processing
    Digital audio recording on Android 5.0 and Samsung Professional Audio Devices as well as Mac and PC
    32-bit digital signal processor
    24-bit converter with 44.1/48KHz sample rate
    High-definition, low-noise preamp
    Includes AmpliTube UA
    Registration unlocks AmpliTube Metal, 25 Gear Credits for AmpliTube Custom Shop and T-RackS Classic for Mac/PC
    Analog aux input for play-along and practice
    Headphone output and volume control
    Multicolor LED
    Ultra-compact and lightweight design
    Micro-USB port

Universal MIDI interface for iPhone, iPod touch, iPad and Mac/PC

Introducing iRig MIDI 2, the first Lightning/USB compatible mobile MIDI interface that works with all generations of iOS devices as well as Mac and PC. It features everything you loved about iRig MIDI but with even greater pocketability, connectivity and control. Simply put, it's the perfect MIDI solution for the musician on the move.

• Universal MIDI interface for Lightning iOS devices as well as all prior generations of iPhone, iPad and iPod touch plus Mac and PC
• Ultra-portable, pocket-sized form factor that you can take with you anywhere
• Detachable bumper-friendly cables for seamless, universal connectivity
• Lighting connector and USB cable included, 30-pin cable available separately
• Standard-sized MIDI IN, OUT and THRU ports
• MIDI IN/OUT LED indicators for at-a-glance monitoring of MIDI data transmission
• Draws power from host device instead of a bulky power adaptor
• Comes with a powerful suite of music creation apps SampleTank Free, iGrand Piano FREE and SampleTank 3 SE
• Elegant and durable rubberized enclosure
• Designed and made in Modena, Italy

• Universal MIDI interface for iPhone, iPod touch, iPad, Mac and PC
• MIDI IN and OUT activity LEDs
• Connect to the device via standard Mini-DIN port (Mini-DIN to Lightning cable included, Mini-DIN to USB cable included)
• MIDI IN, OUT, and THRU ports
• Powered by the host device

• iRig MIDI 2
• iOS Lightning connection cable (60cm/23.6“)
• USB connection cable (60cm/23.6“)

• 49.5mm/1.95" x 78mm/3.1" x 30mm/1.18“
• Weight: 60g/2.12oz

Devices: iPad and iPhone 4
iOS version: 4.3 and later

Connection: Dock connector port (no batteries required)

*Software: Made for GarageBand

Computer: Mac, with an Intel processor
Memory: 1 GB minimum of installed RAM, 2 GB recommended
Mac OS version: 10.6.4 or later
Connection: USB 2.0 Full Speed

Software: GarageBand, Logic Pro, MainStage or any Core Audio compatible application

• PureDIGITAL instrument connection delivers pristine sound quality

• Designed for electric guitar and bass

• No confusing setup, you can start recording in minutes

• Works with GarageBand on iPad and iPhone or with any Core Audio compatible application on a Mac

• Control knob allows easy input level adjustment

• Multicolor LED for status indication and input level monitoring

• Studio quality instrument preamp with up to 40dB of gain

• High quality locking output connects directly to iPad and iPhone or USB port on a Mac

• 44.1kHz, 24-bit analog-to-digital conversion

• Auto Soft Limit for optimal input level

• Powered by connection to iPad, iPhone or Mac

• Made in the U.S.A.

• JAM
• 0.5m cable for connection to iPad and iPhone
• 1m cable for connection to Mac
• Quick start guide
• Velcro strip

Musical ideas can come anytime and anywhere. So why not be ready for them when they arrive? iRig Keys MINI is an ultra-portable 25-key MIDI controller for iPhone, iPad, iPod touch, Android and Mac/PC. Its 25 velocity sensitive mini-keys provide a generous 2 octave range (plus 1 note), which makes it small enough to easily stash in your laptop or gig bag or backpack with room to spare. Now you have the keys to capture your creativity no matter where your mobile life takes you.

iRig Keys MINI is incredibly easy to use. It connects directly to your iOS device via the included Lightning connector, to your Android device via the included OTG to Micro-USB cable and to your Mac/PC via the included USB cable. It can also connect to older iOS devices via an optional 30-pin cable. And you'll be ready to go right out of the box: No additional apps, software or drivers are necessary to get up and running. Its plug-and-play thanks to its MIDI and USB class compliance — no additional apps, software or drivers are necessary to get up and running.

• 25 velocity-sensitive mini-keys (2 full octaves range plus 1 note)
• Volume/Data knob (assignable)
• Back-lit, soft-touch Octave Up/Down buttons
• Core MIDI and USB class compliant - plug and play
• Powered from iOS device or Mac/PC
• Comes with SampleTank FREE iOS and iGrand Piano FREE apps (download from the App store)
• Comes with iGrand Piano FREE and iLectric Piano FREE for Android (download from Google Play or Samsung Galaxy Apps)
• Comes with free Mac/PC software: SampleTank 3 SE (download from IK User Area)
• Comes with free Mac/PC virtual instrument collections for SampleTank 3: The Grid plus 5 collections from Beats and Elektronika series (choose and download from IK User Area), plus 25 free Gear Credits to use in the Custom Shop
• Includes Lightning, OTG to Micro-USB and USB cables (optional 30-pin cable can be used for older iOS devices)

With one simple plug-and-play FireWire connection, the V4HD turns your Mac or PC desktop or laptop computer into a powerful HD/SD video production workstation equipped with all the video and audio I/O you need.

Connect all your gear, from SD camcorders and monitors to today's latest professional HD cameras, video decks, LCD reference monitors and plasmas – all at the same time, with no cable swapping. Choose your input source, then log and capture HD or SD clips directly into Final Cut Pro or Premiere Pro.

In Final Cut Pro, the V4HD supports full-raster 1920x1080 HD capture and playback using Apple's ProRes 422 codec in both standard and HQ modes. The V4HD is the ideal all-in-one video capture solution for any ProRes workflow.

In both Final Cut Pro and Premiere Pro, the V4HD provides hardware-accelerated capture and playback of DVCProHD, DVCPro50 and DVCPro25 video streams, plus 8- and 10-bit uncompressed SD — all with convenient plug-and-play FireWire connectivity and CPU-efficient intra-frame editing.

The V4HD is ideal for a DVCProHD/P2 workflow because you can immediately play back P2 clips (either imported or ingested) with no transcoding necessary. Conversely, you can connect any SD or HD video source such as an HDV camera, legacy video deck or DVD player and then capture it directly as a DVCProHD clip in Final Cut or Premiere. Many cameras now feed their uncompressed SDI or component output directly from the camera's optics and imager, before compression, for the best-possible picture quality during capture with the V4HD. Need to bring SD material into your HD project? The V4HD even provides hardware-accelerated SD-to-HD up conversion for capturing SD sources in DVCProHD format.

As you edit, monitor your timeline on multiple HD and SD displays simultaneously with the V4HD's hardware-accelerated up-conversion, down-conversion and pull-down insertion or removal. Watch a variety of display formats side by side, from the pixel-for-pixel accuracy of a large plasma screen, to the color-corrected balance of an LCD reference monitor, to the real-world look of a consumer display. Use 32 channels of audio I/O to capture, monitor, mix and master multichannel surround sound for your productions at sample rates up to 192 kHz. Employ Sony 9-pin machine control for advanced Batch Capture and Edit to Tape operations. Keep everything frame-accurate using time code, video reference and audio word clock.

The V4HD delivers all this with one simple FireWire 400 or 800 connection — even to a laptop computer. With the V4HD handling video I/O via FireWire, your laptop's expansion slot can be used for high-performance video storage solutions.

From start to finish, the V4HD streamlines your video production workflow, with unified control over all your video gear from your computer desktop.

System Requirements for the V4HD

The V4HD has the following system requirements.

• 1 GB of RAM; 2 GB or more recommended
• Available FireWire 400 or 800 port
• Available USB port (for firmware updates)
• Large hard disk drive (preferably at least 500 GB)
• CD-ROM disc drive for installation

• PowerPC G5 CPU or faster; Intel CPU and multiple CPUs or multiple-core CPU highly recommended. An Intel CPU is required for ProRes support.
• Mac OS X version 10.4, 10.5, or 10.6; version 10.4.9 or later is required
• For use with Final Cut Pro 5.1 or later; Final Cut Pro 6.0 or later is required for ProRes. Final Cut Pro 7.0 or later is recommended under Mac OS X v10.6.

32-bit

• Pentium 4 CPU 1 GHz or faster; multiple processors or multiple cores highly recommended
• 32-bit operating system: Windows 7, Vista, or XP Professional SP3
• For use with Premiere Pro CS3 version 3.1 or later; CS4 support requires version 4.0.1 or later

64-bit

• Intel Core 2 Duo or AMD Phenom II processor
• 64-bit operating system: Windows 7, Vista, or XP
• For use with Premiere Pro CS4 version 4.2.1 or later; CS5 support requires Windows 7 or Windows Vista

Supported NVIDIA graphics cards for GPU acceleration

• Quadro FX line (3800, 4800 and 5800)
• GeFore GTX series (285 and 470)