| Content | Your go-to mic to goIntroducing the First studio quality
mic preamp for the iOS platform
Here's how you use it: Take the microphone you use every day on stage or in the studio and plug it into your iOS device. It's that simple. Need Phantom Power? Flip the "Phantom Power" switch. Congratulations, you've just become a professional user.
This is perhaps the most important product introduction for musicians and the rest of the civilized world since the iPod and iPad. Now, thanks to the iRig Pre, you can hook your favorite microphone to your iOS device and join the mobile music revolution. Create music any time, anywhere with your own high quality microphones on your iPhone, iPod touch or iPad.
So now if you want to record that special riff using your own ribbon microphone and mix it on your iPhone, you can. Simply plug the iRig Pre into the headphone jack of your iOS device, activate phantom power if necessary, launch your recording software and wail away.
Hey, is that a Preamp in your pocket?
Why yes, as a matter of fact it is! The iRig PRE sports an ultra-compact design so it fits pretty much anywhere. Just slightly larger than a 9 volt battery, you'll be amazed at how quickly you'll misplace your iRig PRE. But don't let the small size fool you. iRig Pre is a professional sounding mic preamp that will dazzle you and your friends.
Specs iRig PRE Specifications
- Frequency response: from 20 Hz to 20 kHz +/- 1.5dB
- Noise: -98 dB fullband, phantom power ON
- Maximum output level: 2 Vrms
- Distortion: 0.025% THD
- Phantom max current: 6mA
- Battery duration (Alkaline 9V cell): approx 30 hours when phantom is off, approx 10 hours when phantom is on
| Package includes |
Dimensions |
- iRig PRE
- 9V Battery
- Velcro Strip
|
- 32mm/1.26" x 35mm/1.38" x 83mm/3.27“
(W x L x H)
- Cable lenght: 450mm/17.72“
(Connector included)
- Weight: 100g/3.53oz (Battery included)
|
Requirements iOS Devices
iRig PRE is compatible with iPhone 5s, iPhone 5c, iPhone 5, iPhone 4S, iPhone 4, iPhone 3GS, iPod touch (5th, 4th and 3rd generation), iPad Air, 4th generation, iPad 3rd generation, iPad 2, iPad and iPad mini. iOS 4.3 or later is required.
Android Devices
Works with most Android devices including: Google Nexus S, HTC Desire HD, Samsung Galaxy S III, Samsung Galaxy S II, Samsung Galaxy W, Samsung Galaxy S, Samsung Galaxy Note, Samsung Galaxy Nexus, Samsung Galaxy Tab 10.1, Samsung Galaxy Tab 7 plus.
Mac®: Most Mac computers starting from late 2008 are compatible with the exception of the Mac Pro line.
To check if your Mac is compatible select: About This Mac > More Info > System Report > Audio
and check that "External Microphone / iPhone headset" is appearing on the list of included features. |
Meet Quartet
The ultimate desktop audio interface and control center for iPad and Mac
Apogee Quartet is a professional USB audio interface designed to deliver the ultimate desktop recording experience to the iPad and Mac-based studio. Featuring 4 inputs and 8 outputs of Apogee\'s industry-leading AD/DA conversion technology as well as 4 world-class mic preamps, Quartet bridges the gap between the 2-channel Apogee Duet and Apogee\'s flagship interface, Symphony I/O.
Quartet for iPad and Mac features special circuitry designed to deliver professional performance for iPad use along with low latency USB 2.0 performance for Mac. Quartet\'s MIDI I/O connector lets you connect and power a Core MIDI compatible keyboard/controller while using Duet with your iPad or iOS device.
Legendary Sound Quality
Why Apogee Quartet is the best choice for your studio
Apogee is an award-winning industry leader in digital recording technology with over 25 years of experience. Preferred by recording pros around the world, Apogee products like Duet, Ensemble and Symphony I/O have been instrumental in creating countless GRAMMY® and OSCAR® winning recordings and have set the industry standard in professional recording for over two decades. Quartet is built solidly on this reputation.
Highlights
- First professional multi-channel audio interface for iPad
- Direct digital connection to iPod touch, iPhone, iPad
- Works with new iPhone 5, iPad (4th generation), iPad mini
(Apple\'s Lighting to 30-pin adapter required - Sold separately)
- Works with GarageBand, Auria, MultiTrack and any Core Audio compliant app on iOS
- Works with GarageBand, Logic, Pro Tools, Ableton and any Core Audio compliant app on Mac
- Low latency monitoring, complete input/output control with Apogee\'s Maestro software (iOS & Mac)
- MIDI input/output (USB-A type connector)
- DC power supplies charge to iPod touch, iPhone or iPad
- USB 2.0 audio with 24-bit/192kHz A/D and D/A conversion
- 4 Analog inputs with world-class mic preamps and selectable 48v phantom power
- ADAT/SMUX digital Inputs
- Monitor control - up to 3 speaker sets
- 1 Independent 1/4" stereo headphone output
- QuickTouch pads for input/output selection and advanced control
- Legendary Apogee sound quality
- Designed in California - Made in the U.S.A.
Specifications
System Requirements:
Mac OS:
- Computer: Intel Mac 1.5GHz or faster
- Memory: 2 GB RAM minimum, 4 GB recommended
- OS: 10.6.8, 10.7.4 or greater
- Connection and power: Any available USB port on a Mac
- Power: DC Power supply included
iOS:
- iOS version: 5.1.1 and later
- Connection: 30-pin dock connector
- DC Power supply included
iOS device compatibility (Lightning connector)
* Requires Apple\'s Lightning to 30-pin adapter. Sold separately.
iOS device compatibility (30-pin connector)
Compatible Software:
- Mac
- Any Mac Core Audio compatible application
- Recommended apps: Logic, GarageBand, MainStage, Final Cut, Pro Tools, Ableton Live, Digital Performer, Studio One, Cubase, and Nuendo
- iOS
- Any iOS Core Audio compatible app. Recommended apps: GarageBand, Auria
Features:
- USB 2.0 High-speed Mac audio interface
- 4 Analog Inputs:
- Combination line (balanced +20dBu max)
- Mic/Instrument (+20dBu/+14dBu max)
- 4 Microphone preamps with up to 75dB of gain
- Selectable 48v phantom power, Soft Limit and phase invert
- Digital Inputs:
- ADAT/SMUX Input, 8 channels, 2 Toslink connectors, 44.1kHz to 96kHz
- MIDI input (USB-A type connector)
- 8 Analog Outputs:
- 6 Balanced line outputs, +20 dBu maximum output level
- 1 Independent 1/4" stereo headphone output
- Digital Outputs:
- MIDI output (USB-A type connector)
- Word clock output on BNC connector
- A/D and D/A conversion: 24 bit/192kHz
- 2 top panel high-resolution OLED displays
- Controller knob
- 6 touchpads for direct selection of inputs and outputs
- 3 assignable touchpads to control:
- Mute Outputs
- Dim Outputs
- Sum to Mono
- Clear Meters
- Engage Speaker Set (allows monitoring of up to 3 pairs of speakers)
Mic Pre:
- EIN: 128dB (un-weighted) @ 60dB, 150Ohm input
- Max input level: +20dBu
- Input impedance: 3KOhm
Hi-Z:
- Max input level 14 dBu
- Input impedance: >2MOhm
A/D conversion:
- Max input level (+4dBu ref): +20dBu
- Max input level (-10dBV ref): +6dBV
- Input impedance: 5KOhm
- Freq resp 20 Hz -20Khz: > +/-0.2dB (@44.1Khz)
- Rel. THD + N: -106dB (@ 96Khz)
- Dyn. Range: 114dB (A-weighted)
D/A conversion:
- Max output level (+4dBu ref): +20dBu
- Max output level (-10dBV ref): +6dBV
- Line output impedance: 90 Ohm
- Max output level headphones: 19dBu
- HPH output impedance 30 Ohm.
- Freq resp 20Hz -20 Khz: > +/- 0.05dB (@44.1Khz)
- Rel. THD+N : -113dB (@96Khz)
- Dyn Range: 123dB (A-weighted)
In the box:
- Quartet
- 2 meter USB Cable
- Universal Power Supply with standard 3 pin-IEC cable
- QuickStart Guide
- Instructions for download of software and complete documentation
| The KT-AES50 network module provides a dual port AES50 digital audio interface, compatible with both the Klark Teknik DN9650 and DN9652 Network Bridges and the Midas NEUTRON-NB Dual Network Bridge Expansion Module for the industry-leading NEUTRON High Performance Audio System Engine.
Featuring up to 48 bidirectional channels at both 48 kHz or 96 kHz sample rates, with dual port redundancy in 48 kHz systems, KT-AES50 enables the interconnection of two AES50 networks operating at 96 kHz and 48 kHz respectively, as well as providing expanded AES50 channel counts in either 48 kHz or 96 Hz AES50 networks.
KT-AES50 is designed for simplicity of use, and can operates from the incoming AES50 clock or an external clock via host unit. Panel-mounted LED indicators show the connection status for both AES50 ports.
KT-AES50 is electrically and mechanically compatible with the industry standard Cirrus CM-1 format.
SuperMAC (AES50-Compliant) digital audio networking technology from Klark Teknik simultaneously provides high channel counts, ultra low and deterministic latencies, sample-synchronous and phase-aligned networked clock distribution, error detection and correction, network redundancy, and ease of deployment and use – to meet the demanding requirements of live concert touring.
KT-AES50 is compatible with all Midas digital consoles, audio system engines, digital I/O units, as well as with any other AES50-equipped devices. | The SmartRig-2 XLR Audio Adapter is an easy solution to connect any professional microphone to an iPhone, iPod touch, or iPad and Android devices.
As a high-quality microphone preamp, SmartRig allows you to use professional stage microphones or high-end studio microphones to be used as reporter mics in live situations with your mobile iOS or Android devices as the mobile transmitter to your studio.
it also supports HD Voice with its bandwidth of 20-20.000 Hz
A great complementary product for D&R GSM Hybrid is the Audio Adapter SmartRig 2 that, can offer as an \"in the Field\" product.
Together with a dynamic or condenser Mic, headphones and a smart-phone (Android or Apple) running a recording app on it could be your complete mobile reporter set for a minimum of investment.
Live reporting to the Studio in Voice-HD directly to D&R GSM Hybrid is now possible (depends on your GSM and provider)
Features
- XLR microphone input connector
- +48V phantom power for use with condenser microphones
- 3.5 mm Headphone output for monitoring
- On/Off/+48V switch
- Gain control
- Power/Phantom Power provided by 9V battery (not included)
Specifications
- Frequency Response: 20Hz to 20kHz (+/- 1.5dB)Noise: -98 dB full band (with Phantom Power)
- Maximum Output Level: 2 Vrms
- Distortion: 0.025% THD
- Phantom Max Current: 13mA
- Dimensions: 8.8cm x 4.1cm x 4.2cm
- Weight: 75g (2.57oz)
Included in the box
- 1x SmartRig
- 1x User Guide
- 1x Velcro Strip
- 1x Warranty Card
| Features:
- 2 x Audient Console Mic Pre
- Class Leading Converters
- 1 x JFET Instrument Input
- 4 x Line Outputs
- Dual Headphone Outputs
- ADAT Input for Expandability
- Ultra Low Latency Software Mixer
- Advanced Monitor Control
- Scrollcontrol
- True Phantom Power over USB
- USB3.0 Bus Powered
- All Metal Design
- Free Software + Plugins
Key tech specs
- Mic gain: 58dB
- Mic pre EIN: 128dB A-Weighted
- Mic pre SNR: 100dB A-Weighted
- Mic pre THD+N: <0.002%
- Frequency response (at unity gain): ±0.5dB 10Hz to 40kHz
- ADC Dynamic range: 121dB
- ADC THD+N: <0.001%
- Line output dynamic range: 126dB A-Weighted
- Line output THD+N: 0.0005%
- Frequency Response: ±0.1dB 10Hz to 40kHz
Headphone amp (with USB-C host):
- Max Power with 30Ohm load: 220mW
- Max Power with 62Ohm load: 280mW
- Max Power with 600Ohm load: 100mW
Power requirements:
USB 3.0 - 900mA at 5V or USB-C - 1.5A at 5V
iD4 iPad Support Note: Older/low end iPads might not be supported - recommend use with
USB-C enabled iPads. Need to verify older iPads.
Included Cable:
USC Type C- Type C 1m
Free Software with ARC Bundled with a free suite of creative software including Cubase LE, alongside industry leading plugins and virtual instruments, you can start recording as soon as you open the box. |
- USB 2.0 audio interface, 18 x 20
- Up to 24-bit / 96 kHz
- 18 Inputs and 20 outputs: 8x XLR / 6.3 mm jack combo microphone / instrument / line input, switchable
- MIDAS designed preamp
- 2 ADAT / SPDIF optical inputs and outputs (S/MUX capable)
- 2 Coaxial SPDIF inputs and outputs
- 10x 6.3 mm jack line outputs (1 + 2 monitor output L/R)
- +48 V phantom power can be enabled
- Pad switch for each input
- Gain control per input
- Main output gain control with mute and DIM switch
- Monitoring control with stereo / mono switch
- 2 Separate headphone outputs with control
- MIDI input and output
- External power supply
- Compatible with Windows XP / Vista / 7 / 8 / 10 and Mac OSX
- Design: 19" / 1U
|
Reviews
There are no reviews yet.