IK MULTIMEDIA I-RIG PRO Universal Audio/MIDI interface for iOS and Mac

The all-in-one audio/MIDI interface that fits in your pocket. The only Interface you need for making music on the go.

Wouldn't it be great to have one compact portable interface for your iPhone, iPad or Mac that you could use to connect your studio mics, your guitar or bass, your keyboards and your MIDI controller, and play, practice and record on the go? Ta Da! Now you can with iRig PRO.

iRig PRO is the first full-featured compact audio and MIDI interface you can use with your XLR microphones, your guitar and bass, your keyboard or other line-level source and your MIDI controllers. It features an XLR/1/4" combo jack for connecting microphones and instruments (accepts XLR and 1/4" TS cables), and a MIDI input for plugging in your favorite controller.

Now when you're on the go, you can record vocals, harmonies, acoustic instruments, electric guitar/bass, keyboards and more without changing your interface and disrupting your creative flow. You will find iRig PRO to be the most versatile iPhone and iPad accessory in your gig bag. And when you get back to your Mac, plug iRig PRO into your USB port and keep jamming away on your laptop or desktop.

You'll be amazed by the compact design of the unit and what it actually delivers. About the size of a travel tube of toothpaste, iRig PRO fits nicely into small spaces like your gig bag, the accessory compartment of your hardshell case or the side pocket of your cargo shorts. Just don't forget about it and run it through the laundry.

iRig PRO can handle all of your stuff, including XLR condenser mics, guitars and basses, keyboards and other line-level sources, and MIDI controllers. Whatever you're connecting to your device, iRig PRO has you covered. And iRig PRO comes with 3 connector cables: Lightning, 30-pin and USB, to ensure that you've got the right connections.

• Instrument Input: unbalanced, Hi-Z, TS 1/4” Jack, Tip: signal / Shield: ground
• Maximum Input Level: from 30 mVpp to 6.9 Vpp
• Instrument Input Impedance: 620 kOhms
• Microphone Input: balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
• Microphone Input Level: from 6 mVpp to 1.4 Vpp
• Microphone Input Impedance: approx 2 kOhms
• Gain Control Range: 47 dB
• Phantom Power: 48V +/-10%
• Input Noise: -97 dB RMS, -105 dB(A)
• Distortion (THD): 0.01%
• Frequency Response: 20Hz-20kHz +/- 0.5 dB
• Conversion: 24-bit A/D
• Sampling Rate: 44.1 and 48 kHz
• Battery: 9V (Alkaline suggested), needed for +48V phantom only

Compatible with iPhone 5, iPhone 4S, iPhone 4, iPod touch (5th, and 4th generation), iPad 4th generation, iPad 3rd generation, iPad 2, iPad and iPad mini. iOS 5.1 or later is required.

Mac®: Mac OS X 10.5 or later. One free USB port.

Windows®: Support using the ASIO4ALL driver on Windows XP/Vista/7/8. See our FAQ here for further details.

Apogee ONE makes the legendary quality of Apogee's mic preamps, AD/DA converters and clocking available in a portable form, designed to deliver the purest recordings and best listening experience possible. 

Meet ONE The first studio-quality microphone and audio interface for iPad and Mac The all new Apogee ONE is the first studio quality microphone and USB audio interface for iPad and Mac. ONE is designed for easily creating professional and amazing sounding recordings on your iPod touch, iPhone, iPad or Mac. Using Apogeeʼs premium AD/DA conversion, ONE produces pristine music, podcast, and voice-over recordings while also delivering audiophile quality sound to your headphones. Highlights: - First studi+I85o quality audio interface and microphone for iPad - New circuitry, mic capsule and upgraded sound quality - Redesigned die cast aluminum chassis - Direct digital connection to iPod touch, iPhone, iPad - Works with new iPhone 5, iPad (4th generation), iPad mini - (Lighting adapter required - Sold separately) - Works with GarageBand, MultiTrack, Spotify; Any Core Audio compatible app on iOS - Works with GarageBand, Logic, Pro Tools, Ableton, iTunes; Any Core Audio compatible app on Mac - Low latency monitoring, complete input/output control with Apogeeʼs Maestro software (iOS & Mac) - DC power supplies charge to iPod touch, iPhone or iPad - Optional battery operation for remote recording on iPad (2 AA batteries not included) - USB 2.0 audio with 24-bit/96kHz A/D and D/A conversion - Built-in omnidirectional condenser microphone (mic stand adapter included) - 2 Analog Inputs (XLR microphone and 1/4? instrument connector on breakout cable) - Record up to 2 inputs at a time (instrument + internal microphone or external microphone) - 1 1/8? stereo output for headphones or powered speakers - Legendary Apogee sound quality - Designed in California - Made in the U.S.A.

• Material: Die cast aluminium body, moulded rubber base
• Input 1 options: Built-in microphone, Instrument IN on 1/4“, External microphone - XLR IN on breakout cable
• Input 2 options: Instrument + Built-in microphone, Instrument + External microphone
• Phantom Power: 48V on mic input
• Analog Outputs: 1/8" stereo OUTPUT for headphones or powered speakers
• Level meters: LED
• Mac connection: USB 2.0 High-Speed
• iOS device connection: USB/30-pin dock port, USB lightning connector (sold seperately) (5th gen iPod touch, iPhone 5, 4th gen iPad, iPad mini)
• AD/DA Conversion: 25 bit, up to 96 kHz sample rate
• Compatibility: Mac, iPod touch, iPhone, iPad
• Apogee Maestro control software: Mac, iPod touch, iPhone, iPad
• Built-In Microphone: Condenser/Omnidirectional
• Sound quality: 2nd Gen
• Power: Mac: bus-powered, DC optional, iOS: DC or AA battery power required
• Includes: ONE, Mic stand clip, MAC USB cable, iOS 30-pin cable, breakout cable, universal power supply, QuickStart guide

Create stunning podcasts and voice recordings quickly and easily

iRig MIC Cast is the ultra-compact, portable voice recording microphone designed specifically for recording podcasts, interviews, lectures, voice memos, speeches and more.

iRig MIC Cast provides a pocket-sized voice recording solution with crystal-clear audio quality. It features a tight unidirectional pickup pattern that minimizes background noise, making it ideal for single-source audio recording.

This makes iRig MIC Cast also great for business applications like recording meetings and enhancing the audio and voice quality of conference calls.

iRig MIC Cast is proof that great things come in small packages. In addition to an incredibly flat frequency response with zero tonal coloration, the iRig MIC Cast...

• Features a stereo mini-jack headphone output enabling real-time monitoring of what is being recorded using headphones or speakers.
• Offers a mini-switch that provides two different sensitivity settings to record close-up or distant sources.
• Includes an adjustable desktop stand for convenient iPhone/iPod touch positioning during recording.
• Has a bumper-friendly mini-jack connector that fits the majority of iPhone/iPod touch cases.
• Has an ultra-compact profile that can be carried anywhere with ease.
• Like other IK Multimedia microphones, it includes 2 free apps: iRig Recorder, an easy-to-use voice recording/editing app, and VocaLive, a multi-effects processing app for singers.
• Works with all regular phone calls and any Voice-Over-IP app.
• Is compatible with iPhone/iPod touch/iPad.

• Microphone Type: condenser electret
• Polar Pattern: unidirectional/cardioid
• Frequency Response: 100 Hz - 15 kHz, -3dB
• Maximum Sound Pressure: 110 dB
• Distortion: 3% THD at 110 dB, 1 kHz
• Windscreen: built-in

iRig MIC Cast is compatible with iPhone 5, iPhone 4S, iPhone 4, iPhone 3GS, iPod touch (5th, 4th and 3rd generation), iPad 4th generation, iPad 3rd generation, iPad 2, iPad and iPad mini. iOS 4.3 or later is required.

Works with most Android devices including: Google Nexus S, HTC Desire HD, Samsung Galaxy S III, Samsung Galaxy S II, Samsung Galaxy W, Samsung Galaxy S, Samsung Galaxy Note, Samsung Galaxy Nexus, Samsung Galaxy Tab 10.1, Samsung Galaxy Tab 7 plus.

Mac®: Most Mac computers starting from late 2008 are compatible with the exception of the Mac Pro line.
To check if your Mac is compatible select: About This Mac > More Info > System Report > Audio
and check that "External Microphone / iPhone headset" is appearing on the list of included features.

TASCAMʼs iU2 is a premium sound quality audio interface for the iPad, iPhone and iPod Touch. It includes all of the features of TASCAMʼs best-selling USB audio interfaces, including a pair of great-sounding microphone inputs. The XLR inputs have phantom power for use with high-quality condenser microphones. These feed an onboard microphone preamp and A/D converter for better sound performance than those built into iPhone and iPad – true stereo recording with low noise and less tendency to distort. The inputs also accept line-level signals or you can plug a guitar or bass directly into your device.

In addition to compatibility with iOS devices, the iU2 also works with Mac and Windows computers. A zero-latency monitoring path allows musicians to hear themselves directly through the unit, without any distracting delay. MIDI in and out are provided to interface with synths and drum machines, and a digital output connects to digital mixers or recorders.

When youʼre ready to get serious with iPad music recording, step up to the pro-quality interface of TASCAMʼs iU2.

    Audio/MIDI Interface for Mac, Windows and iOS devices
    Compatible with iPhone, iPad and iPod Touch
    Two XLR mic inputs with phantom power
    Two balanced line inputs
    Instrument-level input for guitar or bass
    MIDI in and out
    Onboard A/D conversion for low-noise and distortion when recording with iOS devices
    Zero-latency direct monitoring
    S/PDIF Digital Output
    Includes USB cable, iOS dock connection cable, XLR to ¼” conversion cables

 User\'s Manual

iKlip MINI is a universal microphone stand adapter for the iPhone® and iPod touch® to support your iOS device on stage, in the studio, at school or in the office. iKlip MINI securely supports your iPhone/iPod touch on any standard mic stand, pole or tripod (with diameters ranging from 11 - 20 mm /.43" - .79“) placed on the floor or tabletop.

Made of sturdy, durable thermoplastic, iKlip MINI is compatible with every existing iPhone and iPod touch, from the original models to the latest generation devices.

Designed and manufactured in Italy, iKlip MINI firmly holds the device in place in both horizontal and vertical positions, and its multi-angle adjustable design allows optimal viewing and accessibility with all controls, buttons, connection ports and camera kept free from obstruction. It can also be easily rotated from portrait to landscape position by simply loosing or tightening a knob with no need for additional tools. It can be mounted on the vertical pole of a mic stand as well as on its horizontal boom.

An included detachable bracket supports our popular iRig guitar interface adapter together with iKilp MINI in both horizontal and vertical mounting positions so you can have immediate access to your iOS device multi-touch controls during your live performances with the AmpliTube range of apps or any other guitar effects app.

iKlip MINI is also the perfect companion to IK's iRig Mic, the handheld microphone for iOS devices, that allows vocalists and speakers alike to conveniently hold and operate the device at a close distance on the same mic stand with IK's VocaLive or any other vocal processing app.

There are a variety of apps for iPhone/iPod touch that benefit from the iKlip MINI's floor or tabletop mic stand support including karaoke, score and tablature, DJ, recording, mixing, video, photography, teleprompting and many more. Everything you use on your iPhone or iPod is now right within your reach.

Features:

• Sturdy, durable thermoplastic construction holds your iPhone and iPod touch securely without scratching or marring it
• Compatible with all previous and current iPhone and iPod touch models
• Firmly attaches to virtually any microphone stand, pole and tripod with diameters of 11 - 20 mm /.43" - .79“
• Horizontal or vertical mounting with multi-angle adjustment and easy rotation
• Can be placed on the mic stand vertical pole or its horizontal boom
• All controls, buttons, connectors and camera of the iOS device are accessible
• Fast installation - can be mounted in seconds
• Includes detachable iRig bracket for the AmpliTube range of apps or any other guitar effects app
• Perfect companion to the iRig Mic handheld microphone and vocal processing apps such as VocaLive
• Can be used with a variety of apps including karaoke, score and tablature, DJ, recording, mixing, video, photography, teleprompting and many more
• Designed and manufactured in Italy

• Dimensions: 95 x 140 x 80mm / 3.74 x 5.51 x 3.15“
• Weight: 150 gr / 5.29 oz
• Material: ABS/PC
• Pole diameters: 11-20 mm /.43 - .79“
• Includes detachable iRig bracket

Put Your iPad Right Where You Need It

Introducing the iKlip 2 for iPad - a newly designed multi-angle lightweight universal iPad microphone stand adapter. We've taken the hugely successful iKlip Microphone Stand Adapter and made it even better and easier to use. Now take your favorite iPad music apps to the stage for live performance with solid, dependable secure support and multi-angle global positioning.

The new iKlip 2 for iPad is easy to use in any live setting - onstage, in the studio, at school, at home or in the boardroom. With its new ball joint multi-angle adjustable design, you can securely position your iPad for optimal viewing and accessibility, while all controls, buttons and connection ports remain free from obstruction. Plus, the iKlip 2 can now be attached to beefier mic stand poles - up to 1.2" diameter.

iKlip 2 will soon be compatible with the Apple's sleek new iPad Air. Just snap in the adapters and your iPad Air will fit snugly into your iKlip 2.