ART MyMONITOR PERSONAL HEADPHONE MONITOR MIXER

108.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
MyMONITOR – Personal Headphone Monitor Mixer Overview Problem: A performer needs to hear him/herself through headphones exclusively or mixed with the output of a mixer, CD player, tape deck, or other stereo line level source. Only the mic signal, however, should be going to the main mixer. Solution: Connect MyMONITOR between the mic and line […]

 

Read more

MyMONITOR – Personal Headphone Monitor Mixer Overview

Problem: A performer needs to hear him/herself through headphones exclusively or mixed
with the output of a mixer, CD player, tape deck, or other stereo line level source. Only the
mic signal, however, should be going to the main mixer.
Solution: Connect MyMONITOR between the mic and line source, and the mixer. The Mic
and line Monitor levels can then be adjusted for mix and volume through the headphones.
Only the mic signal will go to the board. And since MyMONITOR can be AC or battery powered,
the unit can be used on a large stage or wherever there is no AC outlet nearby. Dynamic or
condenser mics can be used since phantom power would come through the Mic Thru jack from
the mixer or other source.

MyMONITOR – Personal Headphone Monitor Mixer Specifications:

Signal To Noise Ratio 90dB
Gain 15dB (1/4 in), 50dB (XLR)
Maximum Input Level -20dB mic, 40dB Monitor
Output Impedance 10 ohms
Power Requirements 12V DC (Adapter included) or one 9V battery
Phantom Power ON/OFF switch
Power LED indicator
Dimensions 4.5×2.75×1.5 inches (112mm x 72mm x 40mm)
Weight 1.3lb (590g)

Weight 0.59 kg

Reviews

There are no reviews yet.

Be the first to review “ART MyMONITOR PERSONAL HEADPHONE MONITOR MIXER”

Your email address will not be published. Required fields are marked *

Quick Comparison

ART MyMONITOR PERSONAL HEADPHONE MONITOR MIXER removeSennheiser HDVA 600 Headphones Amplifier removeAPOGEE GROOVE HEADPHONES AMP , USB DAC removeBEHRINGER HA400 Ultra-Compact 4-Channel Stereo Headphone Amplifier removeSennheiser HDVD 800 Headphones Amplifier removeLD SYSTEMS HPA 4 Compact HEADPHONE AMPLIFIER 4 CHANNELS remove
NameART MyMONITOR PERSONAL HEADPHONE MONITOR MIXER removeSennheiser HDVA 600 Headphones Amplifier removeAPOGEE GROOVE HEADPHONES AMP , USB DAC removeBEHRINGER HA400 Ultra-Compact 4-Channel Stereo Headphone Amplifier removeSennheiser HDVD 800 Headphones Amplifier removeLD SYSTEMS HPA 4 Compact HEADPHONE AMPLIFIER 4 CHANNELS remove
ImageBEHRINGER HA400 Ultra-Compact 4-Channel Stereo Headphone Amplifier
SKUAT/EM/000035S07SE00313GROOVEE005298S07SE00312LDHPA4
Rating
Price 108.00 incl. GR VAT 1,499.00 incl. GR VAT 271.56 incl. GR VAT 35.50 incl. GR VAT 1,999.00 incl. GR VAT 49.00 incl. GR VAT
Stock

Available on backorder

In stock

Available on backorder

Available on backorder

In stock

In stock (can be backordered)

AvailabilityAvailable on backorderIn stockAvailable on backorderAvailable on backorderIn stockIn stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Precise control of your headphone volume
  • Ideal for a full band with 4 high-quality channels
  • Perfect for stage and studio applications
  • DC 12V adapter included
Content

MyMONITOR - Personal Headphone Monitor Mixer Overview

Problem: A performer needs to hear him/herself through headphones exclusively or mixed
with the output of a mixer, CD player, tape deck, or other stereo line level source. Only the
mic signal, however, should be going to the main mixer.
Solution: Connect MyMONITOR between the mic and line source, and the mixer. The Mic
and line Monitor levels can then be adjusted for mix and volume through the headphones.
Only the mic signal will go to the board. And since MyMONITOR can be AC or battery powered,
the unit can be used on a large stage or wherever there is no AC outlet nearby. Dynamic or
condenser mics can be used since phantom power would come through the Mic Thru jack from
the mixer or other source.

MyMONITOR - Personal Headphone Monitor Mixer Specifications:

Signal To Noise Ratio 90dB
Gain 15dB (1/4 in), 50dB (XLR)
Maximum Input Level -20dB mic, 40dB Monitor
Output Impedance 10 ohms
Power Requirements 12V DC (Adapter included) or one 9V battery
Phantom Power ON/OFF switch
Power LED indicator
Dimensions 4.5x2.75x1.5 inches (112mm x 72mm x 40mm)
Weight 1.3lb (590g)

Overview

Sound can be perfected with Sennheiserʼs HDVA 600. Delivering authentic sound in its purest form, listeners are treated to a world of sheer listening pleasure. Years of knowledge in audio engineering and innovations in acoustic amplification, resulted in the creation of the HDVA 600. The consistently symmetrical signal processing and extremely low harmonic distortion guarantees an absolutely precise sound. Also, thanks to their pre-amp performance, they are easy to adjust and be connected directly to speakers for optimum audio amplification. In essence, the HDVA 600 provides a spectacular listening experience when paired with any Sennheiserʼs audiophile headphones.

Features
Consistently symmetrical signal processing for maximum sound quality
Symmetrical inputs and outputs simplify integration into a system
High-end ALPS quadruple potentiometer achieve perfect channel equality
Variable gain factor (five stages) for optimized use of low impedance headphones
Sophisticated metal housing to protect against signal scatter and vibration
Solid controls turned from solid metal, providing the utmost in long-term stability

Info

Apogee Groove is the best portable USB DAC and headphone amp for listening to music on your Mac or PC. Groove takes the same high quality audio technology found in the worldʼs most prestigious recording studios and delivers it to your laptop. Connect Groove directly to your computer and connect your headphones or powered speakers directly to Groove. Itʼs that easy. Youʼll be amazed by the difference in sound quality. Highlights: USB 2.0 connection to Mac and PC Up to 24 bit / 192kHz audio ESS Sabre DAC Constant Current Drive?, Ultra-smooth frequency response for any headphones Quad Sum DAC?, 4 DACs per channel for highest dynamic range and lowest distortion Asynchronous clocking Max output level: 225mW into 30 Ohm Multi-color LEDs for status and level indication Powered by USB Top panel buttons for adjusting output level and muting Compact and portable (95mm H x 30mm W x 16mm T) Premium aluminum build quality Built in the USA Pricing to be announced

Behringer HA-400 Ultra-Compact 4-Channel Stereo Headphone Amplifier Mini to the max! You can use this super-compact stereo headphone amplifier with practically all headphones?four of them at the same time, to be exact! For example, you can let up to 4 different people in your studio listen to the main mix while the recording is being made, and each listener can determine his own volume level using the dedicated output level controls. The HA400 contains 4 high-power stereo amplifiers that maintain the highest sonic quality even at maximum volume levels. Ultra low-noise 4580 operational amplifiers are included for outstanding audio performance?these are the same op amps found in ?full-size? audio equipment?plus, a DC 12-Volt adapter is included. If you are one of those musicians who like to deck out their equipment with lots of bells and whistles, the HA400 definitely makes a great addition to the functionality of your studio.
The Behringer HA400 offers flexible amplification for up to 4 headphones. Whether you're tracking a full band, playing to a backing track, or just listening to your mix, this compact amp gives every performer diverse volume control. Hear everything with clarity. The HA400 promises high audio quality with zero interference, no matter what headphones you use. Behringer are relied upon by professional musicians everywhere. With the HA400 headphone amplifier, you'll become a part of 50+ years of innovation and expertise.

The Highest Quality Monitoring Possible

Great monitoring is at the heart of a tight performance. Whether you're on stage or in the studio, the HA4000 delivers ultimate control for everyone playing. Discover the highest quality audio from 4 high power, stereo amplifiers. Even at maximum volume, this tidy headphone amp provides clear sound without muddiness or unwanted noise.

Industry Leading Standard

There's a reason why Behringer are leaders in their field. With 50+ years of industry experience, they've built a legacy around exceptional build quality and innovative design. The HA4000 is no exception. Every channel preserves the original sonic qualities of your input signal. That's performance you can trust.

Features

  • Ultra-compact headphone amplifier
  • Ideal for stage or studio use
  • Full control for every channel with 4 independent stereo high-power amplifier sections
  • Extremely high audio quality with virtually all types of headphones, even at maximum volume
  • 12V DC power adapter included
  • Designed and engineered by Behringer in Germany

Specifications

Line Inputs

      • Type: 1/4'' TS Jack, Stereo
      • Impedance: 100kohms
      • Max. input level: +15dBu

Headphone Outputs

      • Type: 1/4'' TRS Jacks, Stereo
      • Impedance: Approx. 80ohms
      • Max. output level: Approx. 40mW in 100ohms

Power Supply

      • Power supply: External power supply 12V

Dimensions/Weight

    • Dimensions: 47mm (H) x 57mm (W) x 104mm (D)
    • Weight: 0.32kg
 

Overview

With Sennheiserʼs HDVD 800, sound is perfect. The HDVD 800 is able to connect with digital sources and is equipped with a high-quality Burr-Brown digital/analog converter (DAC) that converts digital audio data into analog signals with a resolution of 24 bits and a sampling rate of up to 192 kHz. This enables the HDVD 800 to transmit the entire frequency spectrum of high-end audio sources without any loss of frequencies.

In addition to the symmetrical inputs, the HDVD 800 also has an asymmetrical input socket; incoming signals are symmetrized before further processing takes place. Digital sources can be connected to the rear of the unit via an XLR (AES/EBU) input, optical and coaxial (S/PDIF) digital inputs or USB. All digital inputs accept signals up to 24 bit at 192 KHz*. Designed and manufactured in Germany, this high-end, solid-state amplifier harmonize perfectly and deliver an ultimate acoustic performance when paired with any of Sennheiserʼs audiophile headphones.

Features
D/A transducer for all common formats up to 24 bit / 192 kHz
D/A transducer can be used for CD and DVD players
AES/BU, S/PDIF, USB inputs
Symmetrical (XLR) and asymmetrical (RCA) analog inputs
Symmetrical output
Sockets for four sets of headphones (two of which symmetrical)

LD Sytems HPA 4 - a compact and powerful headphone amplifier The LDHPA4 has small dimensions, can handle up to 4 headphones and has an output power with no equal in its class. That means high volume with no distortion. With these features the LDHPA4 is an essential tool for every project- and home studio. Specifications Product type Headphone Amp:
Inputs 2
Input connectors 6.3 mm TRS , RCA
Input impedance 1 k Ohm(s)
Outputs 2
Output connectors 6.3 mm Jack
Power output 4 x 100 mW
Minimum connected impedance 10 Ohm(s)
Frequency response 20 - 20.000 Hz
Controls 4 x headphone volume , Mono/stereo switch
Indicators Power
Operating voltage External Power Supply
Operating voltage 24 V DC
Cabinet material metal
Cabinet surface painted
Width 94 mm
Height 48 mm
Depth 82 mm
Weight 0,27 kg
Accessories (included) power supply
Weight0.59 kg0.40 kg1.00 kg0.40 kg0.40 kg0.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.59 kg
Weight 0.40 kg
Weight 1.00 kg
Weight 0.40 kg
Weight 0.40 kg
Weight 0.50 kg