ART MyMONITOR PERSONAL HEADPHONE MONITOR MIXER

108.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
MyMONITOR – Personal Headphone Monitor Mixer Overview Problem: A performer needs to hear him/herself through headphones exclusively or mixed with the output of a mixer, CD player, tape deck, or other stereo line level source. Only the mic signal, however, should be going to the main mixer. Solution: Connect MyMONITOR between the mic and line […]

 

Read more

MyMONITOR – Personal Headphone Monitor Mixer Overview

Problem: A performer needs to hear him/herself through headphones exclusively or mixed
with the output of a mixer, CD player, tape deck, or other stereo line level source. Only the
mic signal, however, should be going to the main mixer.
Solution: Connect MyMONITOR between the mic and line source, and the mixer. The Mic
and line Monitor levels can then be adjusted for mix and volume through the headphones.
Only the mic signal will go to the board. And since MyMONITOR can be AC or battery powered,
the unit can be used on a large stage or wherever there is no AC outlet nearby. Dynamic or
condenser mics can be used since phantom power would come through the Mic Thru jack from
the mixer or other source.

MyMONITOR – Personal Headphone Monitor Mixer Specifications:

Signal To Noise Ratio 90dB
Gain 15dB (1/4 in), 50dB (XLR)
Maximum Input Level -20dB mic, 40dB Monitor
Output Impedance 10 ohms
Power Requirements 12V DC (Adapter included) or one 9V battery
Phantom Power ON/OFF switch
Power LED indicator
Dimensions 4.5×2.75×1.5 inches (112mm x 72mm x 40mm)
Weight 1.3lb (590g)

Weight 0.59 kg

Reviews

There are no reviews yet.

Be the first to review “ART MyMONITOR PERSONAL HEADPHONE MONITOR MIXER”

Your email address will not be published. Required fields are marked *

Quick Comparison

ART MyMONITOR PERSONAL HEADPHONE MONITOR MIXER removeBEHRINGER MA400 Ultra-Compact Monitor Headphone Amplifier removeART HEADAMP 4 OUTPUT STEREO HEADPHONE AMP removeVOX AMPLUG TWIN Guitar Headphone Amp removePALMER PMONICON Pro MONICON - Passive Monitor Controller removeLD Systems HPA 1 - Amplifier for headphones and wired IEM In-Ear-Monitoring remove
NameART MyMONITOR PERSONAL HEADPHONE MONITOR MIXER removeBEHRINGER MA400 Ultra-Compact Monitor Headphone Amplifier removeART HEADAMP 4 OUTPUT STEREO HEADPHONE AMP removeVOX AMPLUG TWIN Guitar Headphone Amp removePALMER PMONICON Pro MONICON - Passive Monitor Controller removeLD Systems HPA 1 - Amplifier for headphones and wired IEM In-Ear-Monitoring remove
Image
SKUAT/EM/000035E005310AT/EM/000036VOX AMPLUG TWINPMONICONLDHPA1
Rating
Price 108.00 incl. GR VAT 31.00 incl. GR VAT 97.00 incl. GR VAT 30.51 incl. GR VAT 70.00 incl. GR VAT 119.95 incl. GR VAT
Stock

Available on backorder

In stock

Available on backorder

In stock

Only 1 left in stock (can be backordered)

Only 4 left in stock (can be backordered)

AvailabilityAvailable on backorderIn stockAvailable on backorderIn stockOnly 1 left in stock (can be backordered)Only 4 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

MyMONITOR - Personal Headphone Monitor Mixer Overview

Problem: A performer needs to hear him/herself through headphones exclusively or mixed
with the output of a mixer, CD player, tape deck, or other stereo line level source. Only the
mic signal, however, should be going to the main mixer.
Solution: Connect MyMONITOR between the mic and line source, and the mixer. The Mic
and line Monitor levels can then be adjusted for mix and volume through the headphones.
Only the mic signal will go to the board. And since MyMONITOR can be AC or battery powered,
the unit can be used on a large stage or wherever there is no AC outlet nearby. Dynamic or
condenser mics can be used since phantom power would come through the Mic Thru jack from
the mixer or other source.

MyMONITOR - Personal Headphone Monitor Mixer Specifications:

Signal To Noise Ratio 90dB
Gain 15dB (1/4 in), 50dB (XLR)
Maximum Input Level -20dB mic, 40dB Monitor
Output Impedance 10 ohms
Power Requirements 12V DC (Adapter included) or one 9V battery
Phantom Power ON/OFF switch
Power LED indicator
Dimensions 4.5x2.75x1.5 inches (112mm x 72mm x 40mm)
Weight 1.3lb (590g)

  • Ultra-compact monitor headphone amplifier for studio and stage applications
  • Personal \'\'more me\'\' mixer – mix a mic plus a monitor signal and hear them via headphones
  • Flexible Mic In and Mic Through connectors plus Ground Lift switch
  • Stereo Monitor input with dedicated Monitor Level control and Mono/Stereo switch
  • High-power headphone output on 1/4\'\' and 1/8\'\' jack connectors
  • DC 12 Vadapter included
  • 3-Year Warranty Program*
  • Designed and engineered in Germany

HeadAMP - Four Output Stereo Headphone Amp Overview

Most home recordings involve from one to four people, any or all of whom are
going to need headphone monitoring. The monitor amp would be connected
to the tape deck?s headphone output or a mixer output so that the performers
can hear themselves and each other. Of course the same application can apply
to band rehearsals and even home entertainment. HeadAMP provides amplification
and individual volume control for up to 4 headsets. It can be driven by either line-
level or headphone amplifier signals (mono or stereo).

HeadAMP - Four Output Stereo Headphone Amp Specifications:

Signal To Noise Ratio >90dB
IMD (SMPTE) 0.01%
Maximum Input Level +14dBV
Maximum Output Level 20dB per channel
Output Impedance 51 Ohms per channel
Output Connectors Four stereo 1/4? headphone outputs
Power Requirements 12V DC (Adapter included) 
Total Harmonic Distortion

The amPlug Twin rolls back the years to capture the sound of the legendary clean American dual speaker combo tube amp. Noted for its sparkling and sustained clean sound, this amp has been is widely used in many genres - rock, blues, jazz, country, and more. Raising the gain provides a powerful American tube overdrive sound. A stereo chorus effect is built into the amPlug Twin, adding natural spaciousness and depth to the sound. As you play these sounds, you're sure to forget the passage of time, and lose yourself in the tones loved by musicians in styles such as jazz, country, and blues.
Specifications

  • Controls: Gain, Tone, Volume; STANDBY/ON/FX switch
  • Terminals: PHONES Jack (stereo), AUX In Jack (stereo)
  • Power supply: AAA batteries (x 2)
  • Battery life: amPlug Twin (FX on):
  • With zinc-carbon batteries: approximately 3 hours
  • With alkaline batteries: approximately 11 hours
  • Dimensions (W x D x H): 86 x 80 x 31mm/3.39" x 3.15" x 1.22“
  • Weight: 40 g/1.41 oz. (not including batteries)
  • Included items: AAA batteries (X2) (for verifying operation)
Palmer Monicon, and the volume is right! With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal. The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.
  • Type: passive
  • Number of channels: 2
  • Number of inputs: 2
  • Input connections: XLR Combo / 3.5mm stereo jack
  • Input type: balanced/unbalanced
  • Maximum input level: +20 dBu
  • Input impedance: 10 kohms balanced/ 5 kohms unbalanced
  • Number of outputs: 2
  • Output connections: XLR/m, 3.5 mm stereo jack
  • Output type: balanced/unbalanced
  • Max output level: +20 dBu
  • Output impedance: 600 ohms
  • Frequency response: 10Hz - 40 kHz +/- 1 dB
  • THD: 0,001 %
  • Max. attenuation: 85 dB (attenuator), 112 dB (attenuator + mute)
  • Controls: Attenuation, Mute, Mono
  • Housing material: sheet steel/wood
  • Housing surface: powder-coated
  • Width: 164 mm
  • Height: 62 mm
  • Depth: 85 mm
 
The LD Systems HPA 1 is a versatile headphone amplifier with high power output for stage, studio and home recording and is the perfect solution for wired in-ear-monitoring.. The compact device in a rugged, ergonomically shaped plastic housing with soft-touch surface and practical belt clip is very extensively equipped. In addition to locking XLR connectors for the stereo signal L/R input, the HPA 1 has a balanced 3.5 mm stereo jack as AUX input, which can be used in parallel for clicks or playback. It is protected for safe operation against excessive input levels; a hollow pin socket with negative internal contact enables the connection of a network adapter for fixed operation. A 3.5 mm stereo jack is provided as earphone and headphone output. Volume level and balance can be set with easy-grip knobs, a push-button switches between the summed mono and stereo signals. A full-fledged limiter is integrated for distortion-free playback and as protection against feedback. The LD Systems HPA 1 has bi-colour LEDs to facilitate the features overview, which displays the response of the limiter during peaks and the battery status. At 165 grams, the headphone amplifier is distinctly light-weight and can be operated for up to 12 hours thanks to a high quality 9 V block battery.
  • Model Name: LDHPA1
  • Product Type: headphone amplifier
  • Type: 1-channel stereo
  • Inputs: Main Input (Stereo), 1 x Aux In (Stereo)
  • Input Connections: XLR-F (L + R Input, balanced), 3.5 mm stereo jack (Aux In)
  • Input Impedance: 6 kOhm (XLR In), 10 kOhm (3.5 mm jack)
  • Input Sensitivity: 3 dBu (XLR In), -6 dBV (3.5 mm jack)
  • Max. Input Level: 16 dBu (XLR In), 7 dBV (3.5 mm jack)
  • Protection Circuits: Audio Limiter, Max. Input leveling, Power OFF -Mute relay
  • Headphone Outputs: 1
  • Headphone Output Connectors: 3.5 mm stereo jack
  • Power Output: 2 x 1.65 Vrms / 1% THD 33 Ohm Load
  • Minimal Connected Impedance per Channel: 16 ohms
  • Frequency Response: 20 Hz - 40,000 Hz
  • THD 1 kHz Sine: 0.04%
  • Controls: Power/Volume, Balance L/R, Stereo/Mono (Focus) switch,
  • Indicators: Signal (Green) / Peak (Amber), Battery (low battery: red) / Power LED (Power ON: green)
  • Power Supply: 9 V DC block battery, DC jack
  • Operating Voltage: 9 V DC
  • Power Consumption: Nom. 70 mA / Max. 150 mA
  • Housing Material: plastic
  • Housing Surface: soft-touch
  • Housing Colour: black
  • Width: 80 mm
  • Height: 42.5 mm
  • Depth: 133 mm
  • Accessories (included): belt clip, 1 m 3.5 mm stereo jack cable
Weight0.59 kg0.30 kg0.59 kg0.40 kg1.00 kg0.05 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.59 kg
Weight 0.30 kg
Weight 0.59 kg
Weight 0.40 kg
Weight 1.00 kg
Weight 0.05 kg