ART MyMONITORII Headphone amplifier

132.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The MYMonitorII allows blending of any microphone source with any stereo source in a convenient personal monitoring solution. The microphone thru provides direct connection to any mixer and will pass phantom power from the board for powering condenser microphones. Built for maximum flexibility, the ARTcessories MyMonitorII can be powered with the supplied 12vDC power supply, […]

 

Read more

The MYMonitorII allows blending of any microphone source with any stereo source in a convenient personal monitoring solution. The microphone thru provides direct connection to any mixer and will pass phantom power from the board for powering condenser microphones. Built for maximum flexibility, the ARTcessories MyMonitorII can be powered with the supplied 12vDC power supply, or from an internal 9v battery.

The pop-less microphone on/off switch lets you locally mute the microphone. The headphone section has independent 1/8-inch and ¼-inch TRS outputs with plenty of drive for both.

 

  • Blends any Microphone, Instrument and Stereo Source for Personal Monitoring
  • Microphone Input and Thru with Pop-less On/Off Mute Switch
  • Passes Phantom Power for Operation with Condenser Microphones
  • Instrument/Line Input and Thru Jacks
  • Stereo Monitor Input with Blend Control
  • Headphone output section has 1/8-inch and 1/4-inch Jacks
  • High Performance, Low Noise Circuitry
  • 9v battery and 12vDC Power Operation

 

Weight 2.00 kg

Reviews

There are no reviews yet.

Be the first to review “ART MyMONITORII Headphone amplifier”

Your email address will not be published. Required fields are marked *

Quick Comparison

ART MyMONITORII Headphone amplifier removeLD Systems HPA 1 - Amplifier for headphones and wired IEM In-Ear-Monitoring removeVOX AMPLUG-LEAD Guitar Headphone Amp removeTASCAM MH-40MKII HEADPHONES PRE-AMPLIFIER removeAPOGEE GROOVE HEADPHONES AMP , USB DAC removeBEHRINGER MA400 Ultra-Compact Monitor Headphone Amplifier remove
NameART MyMONITORII Headphone amplifier removeLD Systems HPA 1 - Amplifier for headphones and wired IEM In-Ear-Monitoring removeVOX AMPLUG-LEAD Guitar Headphone Amp removeTASCAM MH-40MKII HEADPHONES PRE-AMPLIFIER removeAPOGEE GROOVE HEADPHONES AMP , USB DAC removeBEHRINGER MA400 Ultra-Compact Monitor Headphone Amplifier remove
Image
SKUAT/EM/000034LDHPA1VOX AMPLUG-LEADMH-40MKIIGROOVEE005310
Rating
Price 132.00 incl. GR VAT 119.95 incl. GR VAT 36.00 incl. GR VAT 565.55 incl. GR VAT 271.56 incl. GR VAT 31.00 incl. GR VAT
Stock

Available on backorder

Only 4 left in stock (can be backordered)

In stock

In stock

Available on backorder

In stock

AvailabilityAvailable on backorderOnly 4 left in stock (can be backordered)In stockIn stockAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The MYMonitorII allows blending of any microphone source with any stereo source in a convenient personal monitoring solution. The microphone thru provides direct connection to any mixer and will pass phantom power from the board for powering condenser microphones. Built for maximum flexibility, the ARTcessories MyMonitorII can be powered with the supplied 12vDC power supply, or from an internal 9v battery.

The pop-less microphone on/off switch lets you locally mute the microphone. The headphone section has independent 1/8-inch and ¼-inch TRS outputs with plenty of drive for both.

 
  • Blends any Microphone, Instrument and Stereo Source for Personal Monitoring
  • Microphone Input and Thru with Pop-less On/Off Mute Switch
  • Passes Phantom Power for Operation with Condenser Microphones
  • Instrument/Line Input and Thru Jacks
  • Stereo Monitor Input with Blend Control
  • Headphone output section has 1/8-inch and 1/4-inch Jacks
  • High Performance, Low Noise Circuitry
  • 9v battery and 12vDC Power Operation
 
The LD Systems HPA 1 is a versatile headphone amplifier with high power output for stage, studio and home recording and is the perfect solution for wired in-ear-monitoring.. The compact device in a rugged, ergonomically shaped plastic housing with soft-touch surface and practical belt clip is very extensively equipped. In addition to locking XLR connectors for the stereo signal L/R input, the HPA 1 has a balanced 3.5 mm stereo jack as AUX input, which can be used in parallel for clicks or playback. It is protected for safe operation against excessive input levels; a hollow pin socket with negative internal contact enables the connection of a network adapter for fixed operation. A 3.5 mm stereo jack is provided as earphone and headphone output. Volume level and balance can be set with easy-grip knobs, a push-button switches between the summed mono and stereo signals. A full-fledged limiter is integrated for distortion-free playback and as protection against feedback. The LD Systems HPA 1 has bi-colour LEDs to facilitate the features overview, which displays the response of the limiter during peaks and the battery status. At 165 grams, the headphone amplifier is distinctly light-weight and can be operated for up to 12 hours thanks to a high quality 9 V block battery.
  • Model Name: LDHPA1
  • Product Type: headphone amplifier
  • Type: 1-channel stereo
  • Inputs: Main Input (Stereo), 1 x Aux In (Stereo)
  • Input Connections: XLR-F (L + R Input, balanced), 3.5 mm stereo jack (Aux In)
  • Input Impedance: 6 kOhm (XLR In), 10 kOhm (3.5 mm jack)
  • Input Sensitivity: 3 dBu (XLR In), -6 dBV (3.5 mm jack)
  • Max. Input Level: 16 dBu (XLR In), 7 dBV (3.5 mm jack)
  • Protection Circuits: Audio Limiter, Max. Input leveling, Power OFF -Mute relay
  • Headphone Outputs: 1
  • Headphone Output Connectors: 3.5 mm stereo jack
  • Power Output: 2 x 1.65 Vrms / 1% THD 33 Ohm Load
  • Minimal Connected Impedance per Channel: 16 ohms
  • Frequency Response: 20 Hz - 40,000 Hz
  • THD 1 kHz Sine: 0.04%
  • Controls: Power/Volume, Balance L/R, Stereo/Mono (Focus) switch,
  • Indicators: Signal (Green) / Peak (Amber), Battery (low battery: red) / Power LED (Power ON: green)
  • Power Supply: 9 V DC block battery, DC jack
  • Operating Voltage: 9 V DC
  • Power Consumption: Nom. 70 mA / Max. 150 mA
  • Housing Material: plastic
  • Housing Surface: soft-touch
  • Housing Colour: black
  • Width: 80 mm
  • Height: 42.5 mm
  • Depth: 133 mm
  • Accessories (included): belt clip, 1 m 3.5 mm stereo jack cable
Plug In, Rock Out!

The headphone guitar amp that lets you enjoy serious guitar sound, fast.
Jamming late at night? Donʼt want to wake the neighbors? Maybe you want to work out a lick with your MP3 player without taking the time to set up your amp. You want to play guitar right now. amPlug is the answer. Simply plug this palm-sized headphone guitar amp directly into your guitar, and enjoy serious guitar sound anywhere, anytime.

The amPlug series received wide-ranging acclaim from guitarists around the world for delivering incredible guitar tone in a pocket-sized unit.

The NEW amPlug 'Acoustic' quickly creates shimmering, rich acoustic guitar sounds. Two distinct sounds are available using the Fat/ Bright switch. The Blend combines the acoustic tone with the original signal for just the right mix! In combination with electric guitar's own tone controls and pickup selection, the sound variation is unlimited. The ultra-long battery life provides up to 27 hours of extended enjoyment! At home, in the studio and on the go, amPlug Acoustic delivers superb acoustic guitar sounds anytime, anyplace.

'Lead' is based on a US-made high-gain boutique amp, further modified for lead guitar. It also contains a digital delay effect, delivering a huge, spatial sound that could not be previously obtained, and giving you a rich and full-fledged lead sound that you can play anytime and anywhere.

'Bass' is modeled on VOX's classic AC100 bass amp, and expands its potential with a full-range tone that supports today's bass sounds. A compressor/boost effect provides not just compression but also a thick overdrive sound, giving you the perfect tones for performing in any style. Careful attention has been paid to the sound quality, and a high-quality FET buffer circuit has been used to obtain even greater dynamic range.

The oringial models are still available in three different sound styles: VOX AC30, Classic Rock, based on a UK-made amplifier head, and Metal, based on a California-made high-gain amplifier head. Even with its ultra-compact size, amPlug perfectly reproduces the complex and warm distortion that is distinctive of a vacuum tube, as well as the powerful high gain produced by a large amp stack. Using all new analog modeling technology, amPlug delivers full-fledged amp sound.

  • Plugs directly into your guitar/ bass —a great-sounding headphone guitar amp that gives you serious sound fast.
  • Now available in six styles: Lead, Bass, VOX AC30, Classic Rock, Metal and Acoustic.
  • AUX in jack lets you jam along with your CD/MP3 player.
  • 100% analog circuit faithfully simulates the response of the original amps.
  • 'Lead' delivers hi-gain lead guitar sounds, plus a digital delay effect.
  • 'Bass' features a full-range bass sound with a compressor/boost effect.
  • AC30 emulates the AC30 top boost sound of a vintage VOX AC30.
  • Classic Rock gives you the great high-gain sound of a UK-made 100W amp.
  • Metal delivers the explosive roar of US high-gain metal sound.
  • 'Acoustic' features Fat/Bright switch which offers two types of acoustic sounds.
  • 'Acoustic' also features blend control which mixes the acoustic tones with your original signal for just the right mix.
  • Up to 15 hours of battery life with two Alkaline AAA batteries.
  • Quick and easy setup! Just connect amPlug to your guitar and enjoy serious sound.

With its completely analog design, great care was also taken with amPlug's gain circuitry. The 'AC30' uses two natural-sounding gain stages to reproduce the distinctive AC30 tone. 'Classic Rock' uses four classical gain circuits to deliver that great sound. 'Metal' uses two stages of ultra-high gain plus a mid-cut circuit, giving you modern metal high-gain sound anywhere and anytime. Even the circuit response of the original amp is simulated completely. The simulation extends not only to the response of the tone circuits, but also to the way in which the high frequency and gain are affected when you turn down the volume control of the guitar. Every detail has been faithfully reproduced.

amPlug can be used in numerous ways
With up to twenty seven hours of battery life, it's easy to take amPlug anywhere. In addition to practicing at home, it's a great way to warm up before a live performance or on the road. And amPlug is not just a convenient way to get great guitar sound. There's also an AUX input jack so you can jam along with your CD/MP3 player.

amPlug is your fastest ticket to great tone – anytime, anywhere!

VOX amPlug Specificaitons
  • Power supply: two AAA batteries
  • Battery life: with alkaline batteries: approximately 27 hours (with zinc-carbon batteries: approximately 10 hours.)
  • Dimensions (W x D x H): 86 x 80 x 31 (mm), 3.39" x 3.15" x 1.22"
  • Weight: 40g /1.41oz. (not including batteries).
  • Included items: two AAA zinc-carbon batteries

Specifications
General

Frequency response
    

 
    

20 Hz - 20  kHz (+0 dB, -1.5 dB)

Signal-to-noise ratio
    

 
    

100  dB (IHF A-weighted, input level control min.)

Channel separation
    

 
    

80 dB between adjacent channels

Line input
    

 
    

Front: 6.3 mm jacks, unbalanced
Rear: RCA connectors, unbalanced

   Input impedance
    

 
    

40 kOhm

   Nominal level
    

 
    

-10 dBV (0.3 V)

Headphone outputs
    

 
    

four 6.3 mm stereo jacks

   Maximum output power
    

 
    

2 x 1.5 W at 8 Ohm (1 channel in use)
2 x 1,2 W an 8 Ohm (four channels in use)

Power supply
        

230 V AC, 50 Hz

Power consumption
    

 
    

10 W

Dimensions (W x H x D)
        

482  mm x 44  mm x 196  mm

Weight
    

 
    

4 kg

Info

Apogee Groove is the best portable USB DAC and headphone amp for listening to music on your Mac or PC. Groove takes the same high quality audio technology found in the worldʼs most prestigious recording studios and delivers it to your laptop. Connect Groove directly to your computer and connect your headphones or powered speakers directly to Groove. Itʼs that easy. Youʼll be amazed by the difference in sound quality. Highlights: USB 2.0 connection to Mac and PC Up to 24 bit / 192kHz audio ESS Sabre DAC Constant Current Drive?, Ultra-smooth frequency response for any headphones Quad Sum DAC?, 4 DACs per channel for highest dynamic range and lowest distortion Asynchronous clocking Max output level: 225mW into 30 Ohm Multi-color LEDs for status and level indication Powered by USB Top panel buttons for adjusting output level and muting Compact and portable (95mm H x 30mm W x 16mm T) Premium aluminum build quality Built in the USA Pricing to be announced

  • Ultra-compact monitor headphone amplifier for studio and stage applications
  • Personal \'\'more me\'\' mixer – mix a mic plus a monitor signal and hear them via headphones
  • Flexible Mic In and Mic Through connectors plus Ground Lift switch
  • Stereo Monitor input with dedicated Monitor Level control and Mono/Stereo switch
  • High-power headphone output on 1/4\'\' and 1/8\'\' jack connectors
  • DC 12 Vadapter included
  • 3-Year Warranty Program*
  • Designed and engineered in Germany
Weight2.00 kg0.05 kg0.40 kg4.00 kg1.00 kg0.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.00 kg
Weight 0.05 kg
Weight 0.40 kg
Weight 4.00 kg
Weight 1.00 kg
Weight 0.30 kg