| Content | * Sturdy foot controller with rugged, stylish black aluminum housing
* One metal pedal and nine ultra solid switches (one under the pedal, e.g. to bypass a WahWah effect). Each switch has a status LED indicating its status.
* Two 1/4 TRS inputs with instrument pre-amps (regular line devices such as synthesizers can be used as well), individual gain controls per channel and signal/peak LEDs
* Two balanced 1/4 TRS outputs with high/low switch (full scale and -14 dB, e.g. for guitar amps) and signal LED metersHeadphone 1/4" TRS output with individual level control
* Two 1/4 pedal inputs for additional expression and volume pedals or switch-boxes
* Bidirectional communication with the software (Rig Kontrol 3 displays the status of the software and vice versa)
* 4 digit status LED displays current GUITAR RIG preset number
* Convenient assignment of parameters from within the software
* MIDI I/O with activity LEDs |
RS-422 PROTOCOL CONVERTER
| Specifications:
- Recording media: SD card(64MB to 2GB), SDHC card(4GB to 32GB), SDXC card(48GB to 128GB)
- Recording format
• WAV: 44.1k / 48k / 96k Hz, 16bit / 24bit
• BWF: 44.1k / 48k / 96k Hz, 16bit / 24bit
- Number of channels: 4-channel (stereo × 2, mono × 4)
- Analog audio input
• Connector: XLR-3-31 (1:GND, 2:HOT, 3:COLD) / 6.3mm(1/4“)TRS standard jack
Set to "MIC / MIC+PHANTOM“
• Input impedance: 2k ohms
• Phantom power: 48V +/-4V(10mA/CH), 24V +/-4V(10mA/CH)
• Maximum input level: 0dBu
• Minimum input level: -72dBu
• MIC input gain: TRIM MAX
• LOW: +11dB
• HIGH: +51dB
• HI + PLUS: +63dB
• Input impedance: 10k ohms or more
• Standard input level: +4dBu
• Maximum input level: +20dBu
• Connector: 3.5mm(1/8“)stereo mini jack (this connector can be supplied plug-in power)
• Input impedance: 10k ohms
• Maximum input level: +10dBV
• Minimum input level: -50dBV
• MIC input gain: TRIM MAX
• LOW: +3dB
• HIGH: +26dB
• HI + PLUS: +38dB
• Connector: 3.5mm(1/8“)stereo mini jack
• Input impedance: 10k ohms
• Standard input level: -10dBV
• Maximum input level: +6dBV
Analog audio output
• Connector: 3.5mm(1/8“)stereo mini jack
• Output impedance: 200 ohms
• Standard output level: -10dBV
• Maximum output level: +6dBV
• Connector: 3.5mm(1/8“)stereo mini jack
• Output impedance: 200 ohms
• Standard output level: -40dBV
• Maximum output level: -24dBV
• Connector: 3.5mm(1/8“)stereo mini jack
• Maximum output level: 20mW + 20mW
USB
• Connector: Micro-B type
• Format: USB2.0 HIGH SPEED mass storage class
- REMOTE Connector: 2.5mm TRS jack
- Power: 4 AA batteries(Alkaline or NI-MH), USB bus power, Dedicated AC adapter(TASCAM PS-P515U, sold separately), Dedicated external battery pack(TASCAM BP-6AA, sold separately)
- Power consumption: 5.0W
- Continuous operation time: 2ch WAV, 44.1kHz, 16bit rec, Phantom power not used
- Dimensions: 169(W)×55.2(H)×106.5(D)mm (with the top adapter attached)
- Weight: 625g ( including batteries) / 530g (without batteries )
|
The APH-2n optional accessory pack includes seven tools for use with the H2n. The remote control can be used to start, stop and pause recordings as well as to add marks. The other accessories in the pack are a windscreen that reduces wind and breath noise, a mic clip adapter for use with a mic stand, a tabletop tripod with extendable legs, a padded-shell case, an AC adapter and a USB cable. |
The DNRP-WRC provides two button record control and visual status indication of a connected Denon® DN-F450R/F650R recorder.
The mouse sized unit, once connecte to the recorder using its integral 5 metre lead, can be placed in a convenient location on a board/ meeting room table to allow the recording of conferences and discussions. Visual indication of recorder status is provided by high brightness red and green indicators located around the RECORD button, which show STOP, PLAY, PLAY PAUSE, PLAY F.FWD, PLAY F.REV, CARD ERROR, RECORD and RECORD PAUSE. The two button control allows the recorder to be placed into record mode, create a new record mark and stop the recording process.
The DNRP-WRC is primarily for the simple control of audio recording in areas where conversations, discussions or conferences are taking place. The unit allows the DNF450R/F650R recorder to be placed out of sight to prevent media tampering or access to all the recorder controls.
- Simple unobtrusive controller for the recording of audio in board/meeting rooms
- Easy connection to Denon DN-F450R/F650R recorder serial (RS232) port
- Provides bright visual indication of STOP, PLAY, PLAY PAUSE, PLAY F.FWD, PLAY F.REV, CARD ERROR, RECORD and RECORD PAUSE
- RECORD and STOP buttons allow simple control without the need to access the recorder
- Ergonomic visually pleasing design with internal weight to prevent table slip
- Ultra low power consumption, no need for additional power adaptor
- Fully sealed label provides protection against drink spills
|
Main Features
* Colour TFT touch screen interface
* 20 illuminated flash start keys
* Up to 100 tracks available for flash start through touch screen
* Transport and Online buttons recessed to prevent accidental operation
* 100-mm fader with fader start capability and 0-dB lock
* Monitor speaker and headphones output for monitoring
* CAT6 connection to HS-2 and HS-8
|
Reviews
There are no reviews yet.