NATIVE INSTRUMENTS Komplete Audio 6 EXTERNAL USB II AUDIO INTERFACE WITH 4 IN/OUT

Audio Converters               
A/D Channels,
D/A Channels    4, 4          
Sample Rates    44.1, 48, 88.2, 96 kHz          
Bit Resolution    16, 24 Bit          
                
Inputs 1/2               
(A/D-D/A to Output*)    Line    Instrument    Mic
Input Impedance    44 kOhm, balanced    1 MOhm, unbalanced    3.4 kOhm, balanced
Full-Scale Input Level @ max. Gain    -4 dBu    -9.7 dBu    0 dBu ... -36 dBu
Maximum Input Level    +14.3 dBu    +8.4 dBu    —
Gain    -inf ... +15 dB    -inf ... +21 dB    +11 dB ... +47 dB
Dynamic Range @ Unity Gain    98.3 dB (A)    98.3 dB (A)    98.0 dB (A)
THD+N (Full-Scale Level, Unity Gain)    0.013 %    0.013 %    0.013 %
Frequency Response(96 kHz), -1 dB    13 Hz - 42 kHz    12 Hz - 42 kHz    13 Hz - 45 kHz
Equivalent Input Noise @ Max. Gain    —    —    -127.5 dBu (A)
                
Inputs 3/4               
(A/D-D/A toOutput*)               
Input Impedance    44 kOhm, balanced          
Full-Scale Input Level    +12 dBu          
Gain    -1 dB          
Dynamic Range    98.5 dB (A)          
THD+N (Full-Scale Level)    0.02 %          
Frequency Response (96 kHz), -1 dB    12 Hz - 43 kHz          
                
Line Outputs (D/A)               
Full Scale Output Level @ Max. Volume    +11 dBu          
Dynamic Range @ Max. Volume    102 dB (A)          
THD+N    1/2: 0.01%, 3/4: 0.02%          
Frequency Response (96 kHz), -1 dB    10 Hz - 45 kHz          
                
Headphone Output               
Maximum Output Level (High Impedance)    +12 dBu, 3.0 Vrms          
Maximum Output Power    20 mW @ 100 Ohms, 11 mW @ 33 Ohms          
Dynamic Range    102 dB (A)          
THD+N @ Max Level, 100 Ohms    0.014%          
Frequency Response (96 kHz), -1 dB    9 Hz - 45 kHz          
                
Digital I/O    2 channels (5/6), SPDIF in/out, coaxial    

SUPPORTED DRIVERS

ASIO
Core Audio
DirectSound
WASAPI
Monitor with 1024 x 768 screen resolution, USB 2.0, DVD drive

SYSTEM REQUIREMENTS

Windows
Windows XP (latest Service Pack, 32 Bit), Windows Vista/Windows 7 (latest Service Pack, 32/64 Bit), Intel Pentium 4 2.4 GHz or Intel Core Duo or AMD Athlon 64, 2 GB RAM

Mac
Mac OS X 10.5 or 10.6 (latest update), Intel Core Duo, 2 GB RAM



 

The 828mk3 is MOTU's most advanced FireWire audio interface. Once again it raises the bar with innovative new features, enhanced standard features that remain unique, superb sound and reliable performance.

The 828mk3 provides ten channels of pristine 192 kHz analog recording and playback, combined with sixteen channels of ADAT digital I/O and stereo S/PDIF. Expand your system by connecting additional MOTU FireWire audio interfaces or the 8pre mic input expander.

The 828mk3 is equally well-suited for studio and stage, with or without a computer. As an interface or standalone mixer, the 828mk3 provides 28 separate inputs and 30 separate outputs, including dedicated main outs on XLRs and two front panel headphone outs.

Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer – with no latency and no processor strain on your computer. Apply hardware DSP-driven compression, EQ and reverb to every input and output, independent of your host computer. When recording from the mic/guitar inputs, the 828mk3ʼs signal overload protection gives you an extra 12 dB of headroom above zero with no digital clipping or harsh artifacts.

MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.

After programming the on-board mixing in the studio, unplug the 828mk3 from the computer and take it on the road for operation as a stand-alone mixer with effects. All mixing and effects parameters are adjustable using the front panel backlit LCD.

The 828mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.

• Hybrid FireWire/USB2 connectivity — connect to your computer via either bus-powered FireWire or hi-speed USB2.
• CueMix FX™ — flexible 10 input/14 bus mixer with on-board DSP effects, including reverb with sends/returns, plus EQ and compression on every input and output.
• 10 inputs / 14 outputs — there's no channel sharing in the UltraLite-mk3 Hybrid; the mic inputs, S/PDIF I/O, headphone out and main outs are all handled as separate channels.
• Classic Reverb™ — provides five different room types, three frequency shelves with adjustable crossover points, shelf filtering and reverb lengths up to 60 seconds.
• Two forms of compression — a standard compressor with conventional threshold/ratio/attack/release/gain controls and the Leveler™, an accurate model of the legendary LA-2A optical compressor, which provides vintage, musical automatic gain control.
• Modeled EQ — provides 7-band parametric EQ modeled after British analog console EQs, featuring 4 filter styles (gain/Q profiles) to effectively cover a wide range of audio material. LP and HP filters are also supplied with slopes that range from 6 to 36 dB.
• CueMix FX cross-platform mixing software — attractive graphic mixing, graphic editing of parametric EQ and a convenient tabbed interface for quick access to all features in one window. Also provides full-screen real-time FFT display, spectrogram "waterfall" display, oscilloscope, X-Y plot and linear or polar phase analysis.
• Front-panel control — access any setting in your entire UltraLite-mk3 Hybrid mix directly from the front panel.
• “Reverb return" stream — allows users to record or mix UltraLite-mk3 Hybrid reverb output separately in their DAW. Effects can also be applied when the UltraLite-mk3 Hybrid is operating stand-alone (without a computer) as a complete stand-alone mixer.
• Stand-alone operation — program your mixes at the studio and then bring the UltraLite-mk3 Hybrid to your gig — no computer needed. Just plug in the included power adapter and you are ready to go. Need to tweak the mix? Do it on site using the back-lit LCD and front-panel controls.
• Multiple CueMix FX mixes — for example, create different monitor mixes for the main outs and headphones. Or add send/return loops for outboard gear — with no latency.
• Two combo jacks provide hi-Z 1/4” guitar input or low-Z XLR mic input with phantom power, pad and plenty of gain.
• Eight 24-bit 192kHz analog inputs and outputs on balanced/unbalanced 1/4" TRS jacks
• Precision Digital Trim™ — Digitally controlled analog trim on all analog inputs (mic/guitar inputs + quarter-inch TRS inputs) provides accurate adjustements in 1 dB increments. Fine-tune the balance of your analog inputs and then save/recall trim configurations.
• Direct Digital Synthesis™ (DDS) — a DSP-driven phase lock engine and internal clock source that produces imperceptibly low jitter characteristics (below the noise floor), even when the UltraLite-mk3 Hybrid is resolved to an external clock source via SMPTE time code.
• Time code support — directly resolves to (or generates) time code via any quarter-inch input or output, without the need for an extra synchronizer.
• Sample-accurate MIDI — connect a MIDI controller and/or sound module with no separate interface needed. MIDI I/O is sample-accurate with supporting software.
• Expandable — add additional interfaces for more I/O as your needs grow.
• Separate TRS main outs with front panel volume control.
• Stereo 24-bit 96kHz S/PDIF in/out.
• Includes drivers for Mac & PC, including ASIO, WDM, Wave, Core Audio, and Core MIDI. Supports all popular Mac and Windows audio software.
• 100% compatible with all host-based effects processing in today's popular audio programs.
• Includes AudioDesk full-featured sample-accurate workstation software for the Mac with recording, editing, mixing, real-time 32-bit effects processing & sample-accurate sync.
• Plug-and-play operation with your Mac or PC via FireWire or USB2.
• Front panel volume control for monitoring. Stereo, Quad, 6.1, 7.1 and user-defined surround monitoring setups available.
• Front panel headphone jack with volume control.
• Bus-powered FireWire operation. No need for external power when operating as a FireWire interface connected to a computer. A power supply is included for stand-alone operation.
• Chassis dimensions, excluding rack ears and front and back panel knobs and connectors: 9.5 x 7 x 1.75 inches (24.13 x 17.78 x 4.45 cm). Knobs and connectors extend up to 0.5 inch (1.27 cm) from front and back panels, adding 1 inch (2.54 cm) to depth. With rack ears attached, fits one half of a standard 19 inch (48.26 cm) rack at 1U high.

Features:

USB 2.0 Desktop Recording Studio
44.1kHz to 96kHz sample rates, 24-bit resolution
Pantheon II VST/AU reverb plug-in with 6 legendary Lexicon reverbs
dbx® 60V high-voltage, ultra-low noise microphone preamps
Superior sonic performance
2 analog combi-jacks for mic/line inputs
2 analog 1/4" TRS balanced outputs
Zero latency monitoring
Low latency ASIO drivers
Streamlined monitor form factor puts all recording controls at your fingertips
Separate level meters and gain control per channel
1 side panel 1/4" instrument input
1 side panel headphone output with dedicated volume adjustment
MIDI in and out

Technical Specifications

Microphone Inputs:    Female XLR Pin 2 Hot
Input Impedance:    3kΩ balanced
Phantom Power:    +48 Volts
Maximum gain:    +58 dB
E.I.N. (at max gain):    -125 dBu @ 58dB gain typical (150Ω source) -129 dBu @ 58dB gain typical A-weighted (150Ω source)
Maximum Input Level:    +21 dBu at minimum gain
Frequency Response:    +0/-1 dB, 20Hz - 20kHz
THD+N:    +18 dBu maximum
Impedance:    32Ω Balanced, 16Ω Unbalanced
Headphone Output:    1/4" stereo jack 350mW per channel at 50Ω
MIDI Interface:    5 pin DIN connectors for MIDI in and MIDI out (5 volt signal)
Sample Rate:    44.1, 48, 88.2, or 96 kHz (determined by computer application)
Dynamic Range:    A/D (24 Bit) 108 dB typical, A-weighted, 20Hz - 20kHz
(44.1 kHz sample rate)
D/A (24 Bit) 110 dB typical, A-weighted, 20Hz - 20kHz
A/D/A (24 Bit) 102 dB typical, A-weighted, 20Hz - 20kHz
Power Requirements:    12W 9VAC
Power adaptors available for:
US and Canada: 120 VAC, 60 Hz Adapter: PS0913B - 120
Japan: 100 VAC, 50/60 Hz Adapter: PS0913B - 100
Europe: 230 VAC, 50 Hz Adapter: PS0913B - 230
UK: 240 VAC, 50 Hz Adapter: PS0913B - 240
Australia: 240 VAC, 50 Hz Adapter: PS0913B - 240-AU

Mbox® is a premium audio interface, packing a wide range of analog and digital I/O connections into a mobile form factor.

* Compatible with most major audio software (Pro Tools LE®, Logic, Live, Cubase, and more)
* Bus-powered USB 2.0 connection for maximum mobility
* Professional-grade circuitry and converters deliver exceptional audio performance
* Up to 24-bit, 96 kHz sample rates
* Soft-clip limiter lets you track hot signals without clipping—providing a classic overdriven tape saturation sound
* Built-in guitar tuner
* Onboard DSP offers flexible cue mixing and reverb effects
* Assignable Pro Tools multi-function button on interface gives you fast access to software functions
* Hardware configuration:
o 4 x 4 simultaneous channels of I/O
o 2 XLR mic/line combo inputs with 48 V phantom power
o 2 1/4” DI inputs on front panel for easy access
o 2 balanced 1/4” monitor outputs
o 1 1/4” stereo headphone output with volume control
o Stereo S/PDIF digital I/O
o 1 MIDI input, 1 MIDI output
o Monitor control section with Mono and Dim controls
o Dedicated monitor volume knob

Pro Tools LE Software
Pro Tools 8 Software

The Pro Tools® software platform is used in professional studios around the world, and includes all the tools you need to easily compose, record, edit, mix, and master your projects with pro results—every time.

Key Features

* Award-winning Pro Tools recording, editing, and mixing
* 48 simultaneous stereo audio tracks (expandable with Toolkit options)
* Includes over 70 professional effects and virtual instruments
* Professional MIDI sequencing with dedicated MIDI Editor window
* Integrated Score Editor based on award-winning Sibelius notation software
* Full Elastic Time and Elastic Pitch to easily adjust timing and pitch on your tracks
* Unique Beat Detective LE automatic groove analysis and correction tool
* ReWire support for streaming your favorite applications right into Pro Tools
* Huge selection of compatible third-party plug-ins and software options
* Works on Windows and Mac computers

System Requirements
Mac PC

* Mac OS X 10.5.8 (Leopard) or 10.6.1-10.6.4 (Snow Leopard)
* 1 GB RAM (2 GB recommended)
* 6 GB free disk space
* Intel® processor (no PowerPC® support)
* One USB port



* Windows® XP 32-bit SP3, Windows Vista® 32-bit SP2, Windows 7 32-bit, or Windows 7 64-bit
* 1 GB RAM (2 GB recommended)
* 5 GB free disk space
* One USB port

Compatibility
ASIO, Core Audio, WDM, MME, and multi-client drivers

MINIMUM SYSTEM REQUIREMENTS - Mac

    * OS X Leopard 10.5.8 or Snow Leopard 10.6.3
    * 1 GB RAM (2 GB recommended)
    * 6 GB free disk space
    * Intel® processor (no PowerPC® support)
    * One native USB port

MINIMUM SYSTEM REQUIREMENTS - PC

    * Windows® XP 32-bit SP3, Windows Vista® 32-bit SP2, Windows 7 32-bit Native, or Windows 7 64-bit Native
    * 1 GB RAM (2 GB recommended)
    * 5 GB free disk space
    * One native USB port

What's in the Box?

    * Mbox Mini interface
    * Pro Tools LE 8 software DVD-ROM installer (includes electronic versions of user guides, plus software plug-in bundle)
    * Mbox user guide
    * Registration information card
    * USB cable