Native Instruments Komplete Audio 2 Audio Interface

114.07 incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Komplete Audio 2 Slightly more exciting is the bonus featured Komplete Audio 2. This has twin XLR combi inputs so you could record two mics, or stereo line sources, or two instruments or a mix of those possibilities. The outputs have been upgraded to proper jacks but everything else is the same. It’s even the […]

 

Read more

Komplete Audio 2

Slightly more exciting is the bonus featured Komplete Audio 2. This has twin XLR combi inputs so you could record two mics, or stereo line sources, or two instruments or a mix of those possibilities. The outputs have been upgraded to proper jacks but everything else is the same. It’s even the same size and weight.

NAMM 2019: Komplete Audio 1 and 2 affordable USB audio interfaces

Approximate reading time: 2 Minutes

Native Instruments Komplete Audio 2  ·  Source: Native Instruments

Native Instruments Audio 2  ·  Source: Native Instruments

Native Instruments Audio 1  ·  Source: Native Instruments

Previous Next

The Komplete Audio 6 is one of the best performing USB audio interfaces and has been a decent purchase ever since it was released in 2011. 8 years later Native Instruments finally get around to building a couple more interfaces along similar lines. The Komplete Audio 1 and Komplete Audio 2 are designed to be simple, entry-level interfaces and they look quite tidy.

Komplete Audio 1

First up is the imaginatively named Komplete Audio 1. It has 1 XLR microphone input and 1 regular jack input for instrument or line level. Outputs are on RCA phono for connecting to your hi-fi speakers and a headphone output with its own level control. It’s got some sweet VU LED meters on the top and a lovely big volume knob like the Audio 6 before it. It has direct monitoring and an input/host mix knob so you can hear playback while recording. Simple, elegant, USB powered, good quality recording and playback for your computer or laptop.

Native Instruments Audio 1

Komplete Audio 2

Slightly more exciting is the bonus featured Komplete Audio 2. This has twin XLR combi inputs so you could record two mics, or stereo line sources, or two instruments or a mix of those possibilities. The outputs have been upgraded to proper jacks but everything else is the same. It’s even the same size and weight.

Native Instruments Audio 2

Software

With either interface you get a good bundle of software including full Maschine software and Ableton Live 10 Lite.

  • Replika
  • Solid Bus Comp
  • Phasis
  • Monark
  • Maschine Essentials (full Maschine software with a limited Factory Library)
  • Ableton Live 10 Lite
Weight 0.60 kg

Reviews

There are no reviews yet.

Be the first to review “Native Instruments Komplete Audio 2 Audio Interface”

Your email address will not be published. Required fields are marked *

Quick Comparison

Native Instruments Komplete Audio 2 Audio Interface removeMOTU 896mk3 - 8 mic/guitar inputs with on-board effects and mixing removeLEXICON I-ONIX U22 Audio Interface 2in/2out removeYAMAHA AUDIOGRAM 6 USB Audio Interface removeEDIROL REAC-S8PREAC-U audio/midi sequencer SONAR 8 Producer with REAC Driver Kit removeAPOGEE Ensemble Multi-Channel, 24bit/192kHz Audio Interface remove
NameNative Instruments Komplete Audio 2 Audio Interface removeMOTU 896mk3 - 8 mic/guitar inputs with on-board effects and mixing removeLEXICON I-ONIX U22 Audio Interface 2in/2out removeYAMAHA AUDIOGRAM 6 USB Audio Interface removeEDIROL REAC-S8PREAC-U audio/midi sequencer SONAR 8 Producer with REAC Driver Kit removeAPOGEE Ensemble Multi-Channel, 24bit/192kHz Audio Interface remove
Image
SKUNI/EM/000100896mk3IONIX U22J080.00021REAC-S8PREAC-UENSEMBLE
Rating
Price 114.07 incl. GR VAT1,188.58 incl. GR VAT 156.00 incl. GR VAT 120.00 incl. GR VAT 1,339.20 incl. GR VAT 1,249.99 incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

In stock

In stock

In stock

In stock

Only 5 left in stock

AvailabilityOnly 1 left in stock (can be backordered)In stockIn stockIn stockIn stockOnly 5 left in stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentKomplete Audio 2 Slightly more exciting is the bonus featured Komplete Audio 2. This has twin XLR combi inputs so you could record two mics, or stereo line sources, or two instruments or a mix of those possibilities. The outputs have been upgraded to proper jacks but everything else is the same. It’s even the same size and weight. NAMM 2019: Komplete Audio 1 and 2 affordable USB audio interfaces Approximate reading time: 2 Minutes Native Instruments Komplete Audio 2  ·  Source: Native Instruments Native Instruments Audio 2  ·  Source: Native Instruments Native Instruments Audio 1  ·  Source: Native Instruments Previous Next The Komplete Audio 6 is one of the best performing USB audio interfaces and has been a decent purchase ever since it was released in 2011. 8 years later Native Instruments finally get around to building a couple more interfaces along similar lines. The Komplete Audio 1 and Komplete Audio 2 are designed to be simple, entry-level interfaces and they look quite tidy. Komplete Audio 1 First up is the imaginatively named Komplete Audio 1. It has 1 XLR microphone input and 1 regular jack input for instrument or line level. Outputs are on RCA phono for connecting to your hi-fi speakers and a headphone output with its own level control. It’s got some sweet VU LED meters on the top and a lovely big volume knob like the Audio 6 before it. It has direct monitoring and an input/host mix knob so you can hear playback while recording. Simple, elegant, USB powered, good quality recording and playback for your computer or laptop. Native Instruments Audio 1 Komplete Audio 2 Slightly more exciting is the bonus featured Komplete Audio 2. This has twin XLR combi inputs so you could record two mics, or stereo line sources, or two instruments or a mix of those possibilities. The outputs have been upgraded to proper jacks but everything else is the same. It’s even the same size and weight. Native Instruments Audio 2 Software With either interface you get a good bundle of software including full Maschine software and Ableton Live 10 Lite.
  • Replika
  • Solid Bus Comp
  • Phasis
  • Monark
  • Maschine Essentials (full Maschine software with a limited Factory Library)
  • Ableton Live 10 Lite

The all new 896mk3 FireWire audio interface delivers high-end performance, superb sound, innovative new features and enhanced standard features that remain unique.

The 896mk3 provides eight channels of pristine 24-bit 192 kHz analog recording and playback, combined with sixteen channels of optical digital I/O, stereo AES/EBU, S/PDIF and separate analog main outs. Expand your system by connecting the 8pre mic input expander or other MOTU audio interfaces.

The 896mk3 is equally well-suited for studio and stage, with or without a computer. As an interface or standalone mixer, the 896mk3 provides 28 separate inputs and 32 separate outputs, including dedicated main outs on XLRs and two front panel headphone outs.

Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer – with no latency and no processor strain on your computer. Apply hardware DSP-driven effects processing to inputs, outputs, and busses independent of your host computer. Add Classic Reverb™ with lengths up to 60 seconds. Further sculpt your sound with 7-band parametric EQ featuring filter types carefully modeled after British analog console EQs. Choose between two forms of compression: a conventional compressor and the Leveler™, an accurate model of the legendary LA-2A™ optical compressor that provides vintage, musical automatic gain control.

MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.

When recording from the mic/guitar inputs, the 896mk3ʼs signal overload protection gives you an extra 12 dB of headroom above zero with no clipping or harsh artifacts.

After programming the on-board mixing in the studio, unplug the 896mk3 from the computer and take it on the road for operation as a stand-alone mixer with effects. All mixing and effects parameters are adjustable using the front panel backlit LCD.

The 896mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.

Features:

USB 2.0 Desktop Recording Studio
44.1kHz to 96kHz sample rates, 24-bit resolution
Pantheon II VST/AU reverb plug-in with 6 legendary Lexicon reverbs
dbx® 60V high-voltage, ultra-low noise microphone preamps
Superior sonic performance
2 analog combi-jacks for mic/line inputs
2 analog 1/4" TRS balanced outputs
Zero latency monitoring
Low latency ASIO drivers
Streamlined monitor form factor puts all recording controls at your fingertips
Separate level meters and gain control per channel
1 side panel 1/4" instrument input
1 side panel headphone output with dedicated volume adjustment
MIDI in and out

Technical Specifications

Microphone Inputs:    Female XLR Pin 2 Hot
Input Impedance:    3kΩ balanced
Phantom Power:    +48 Volts
Maximum gain:    +58 dB
E.I.N. (at max gain):    -125 dBu @ 58dB gain typical (150Ω source) -129 dBu @ 58dB gain typical A-weighted (150Ω source)
Maximum Input Level:    +21 dBu at minimum gain
Frequency Response:    +0/-1 dB, 20Hz - 20kHz
THD+N:    +18 dBu maximum
Impedance:    32Ω Balanced, 16Ω Unbalanced
Headphone Output:    1/4" stereo jack 350mW per channel at 50Ω
MIDI Interface:    5 pin DIN connectors for MIDI in and MIDI out (5 volt signal)
Sample Rate:    44.1, 48, 88.2, or 96 kHz (determined by computer application)
Dynamic Range:    A/D (24 Bit) 108 dB typical, A-weighted, 20Hz - 20kHz
(44.1 kHz sample rate)
D/A (24 Bit) 110 dB typical, A-weighted, 20Hz - 20kHz
A/D/A (24 Bit) 102 dB typical, A-weighted, 20Hz - 20kHz
Power Requirements:    12W 9VAC
Power adaptors available for:
US and Canada: 120 VAC, 60 Hz Adapter: PS0913B - 120
Japan: 100 VAC, 50/60 Hz Adapter: PS0913B - 100
Europe: 230 VAC, 50 Hz Adapter: PS0913B - 230
UK: 240 VAC, 50 Hz Adapter: PS0913B - 240
Australia: 240 VAC, 50 Hz Adapter: PS0913B - 240-AU

Computer Based Recording Packages 

Computer-Based Recording Packages For All Players Of Musical Instruments 

The AUDIOGRAM Series has been carefully designed to make setting up your computer-based recording environment an absolute breeze. Coming as a complete kit, the AUDIOGRAM6 and AUDIOGRAM3 each bundle together a hardware interface that adds audio inputs and outputs to your computer, software for recording and producing music, and a USB cable for connecting the audio interface. As such, either package will instantly turn your computer into a powerful yet intuitive tool for recording and editing audio from virtually any microphone or audio input device. What's more, setup is as easy as installing the bundled music-production application, CUBASE AI, on your computer and connecting the audio interface using the USB cable provided! You're then ready to connect instruments, microphones, CD players, MP3 players, and even old record or tape players for recording straight into CUBASE AI.

Size/Weight
Dimensions Width 170mm (6-3/4“)
Height 59mm (2-3/8“)
Depth 192mm (7-5/8“)
Weight Weight 770g (1.7 lbs.)
General Specifications
Sampling Frequency Rate USB AUDIO 1.1, 16bit/44.1kHz
Effects
Types Dynamic 1-knob Compressor (COMP) x 2
Storage and Connectivity
Connectivity Headphones Stereo Phone connector x 1
Microphone Mic/Hi-Z input x 2
LINE IN Phone connector x 4 (L/MONO x 2, R x 2)
LINE OUT Phone connector x 2 (L, R)
USB TO HOST USB (TO HOST)
Power Supply
Power Supply USB powered
System Requirements
Windows PC Windows-based computer with built-in USB interface Windows-based computer with built-in USB interface
CPU 1 GHz or better Intel Core / Pentium / Celeron processor 750 MHz or better Intel Core / Pentium / Celeron processor
Support OS Windows Vista / Windows XP Professional / XP Home Edition
Memory More than 1 GB More than 128 MB
Macintosh PC Macintosh computer with built-in USB interface
CPU Intel CPU / Macintosh G3 processor 300 MHz or better
Support OS Mac OS X 10.3.3 or higher
Memory More than 128 MB
Accessories
Included Accessories Cable USB Cable
Others CUBASE AI DVD, Owners Manual

 

The SONAR REAC Recording System when used in conjunction with the RSS V-Mixing System or RSS Digital Snakes provides the most comprehensive live recording, mixing, mastering and delivery product available. This is the next phase in product development of the REAC driver, which Cakewalk engineered for Roland as a way for users to record from their Digital Snake/V-Mixer System directly into SONAR. The SONAR REAC Recording System includes:

* SONAR 8 Producer
* REAC Driver Kit
* Cakewalk Approved Hardware Monitoring Device
* SONAR Templates
* Users Guides

The REAC protocol provides up to 40 channels of audio to be sent via a single CAT5e Ethernet or fiber optic cable. The REAC driver, developed by Cakewalk, allows the REAC output from the RSS V-Mixer or RSS Digital Snake to connect directly into a PC using a single Ethernet cable.

SONAR 8 Producer gives you what you need for recording, composing, editing, mixing, and mastering. Get innovations that matter, from exclusive features to ignite creativity and perfect your tracks, to groundbreaking technologies that always keep you in control, all backed by the industry's leading 64-bit audio quality. And SONAR 8 Producer delivers the go-to production tools you want with the best collection of virtual instruments, mixing, and mastering effects found in any DAW.

With unlimited tracks, amazing creative tools, inspiring virtual instruments, the freedom to work with any audio interface or control surface, and the most complete delivery capability for collaboration with users of other DAWS, award-winning SONAR Producer is your best choice in a digital audio workstation.

SONAR 8 is the only DAW that offers one-of-a-kind music creation tools that actually help in the songwriting process. Whether you are searching for new ideas or looking to add musical parts to existing songs, SONAR 8 can help you break through those creative blocks.

SONAR 8 provides the most comprehensive recording features of any DAW on the market today. It's designed to meet the needs of even the most demanding professional—whether recording a solo performance, a band, or even an orchestra.

Recommended System Requirements:

* Operating System: Windows XP (32 bit), Windows Vista (32 bit or 64 bit)
* Processor Speed: Intel Core 2 Duo 2GHz or higher
* RAM: 3 GB for 40 Channel Recording
* Ethernet Port Speed: Gigabit Ethernet/CAT5e Only
* Graphics: 1280 x 960, 24-bit color or higher
* Audio Hard Drive Size: 30 GB
* Audio Hard Disk Type: RAID 0 with (2) SATA drives
* Audio Interface: SPS/FA-66 FireWire Audio Interface or Cakewalk VS-700 R
* Media Drive: DVD-ROM, DVD+/-R or DVD+/-RW
* Other Hardware: RSS Digital Snake or V-Mixing System, Roland CAT5e Cables (supplied with Digital Snakes), Gigabit Ethernet Switch (optional)
* Other Software: Adobe Acrobat


8 channels of premium 24-bit 192K AD/DA conversion
4 digitally controlled 75db microphone preamps
2 fully balanced inserts on mic pre channels
4 Hi-Z instrument inputs capable of handling high level instruments
2 individual, controllable and assignable high level headphone outputs
2, 6 or 8 channel monitor outputs
8 channels of ADAT I/O
FireWire 400 I/O, compatible with OS X Core Audio (no driver required)
2 channels of SPDIF I/O
“Soft Limit” for maximum digital input level without overs
“UV22HR” for superior dither of 24 bit resolution down to 16-bit
Advanced, dual-stage "Intelliclock”
Complete integration and control with Appleʼs Logic Pro Software
Compatibility with any CoreAudio software applications
Apogeeʼs Maestro Software for advanced control and routing outside of Logic Pro
Weight0.60 kg4.00 kg2.00 kg1.50 kg1.00 kg3.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.60 kg
Weight 4.00 kg
Weight 2.00 kg
Weight 1.50 kg
Weight 1.00 kg
Weight 3.00 kg