Content |
- Nominal Impedance: 150 Ohms
- Frequency response: 5 ... 30,000 Hz
- Sensitivity at 1 kHz/1 Vrms: 114 dB SPL (1 kHz, 1 Vrms)
- Max input power handling: 1000 mW
- Continuous input power handling: 200 mW
- THD at 1 kHz and 100 dB: SPL 34 dB (>4 kHz)
- Connectivity 3.5 mm (1/8“) TRS jack plug (straight), adapter for 6.3 mm (1/4“)
- Cable length Spiraled 1.5 - 3.0 m (5\' - 10\'), Straight 3.0 m (10\')
- Cable weight Spiraled 100 g (3.5 oz), Straight 60 g (2.1 oz)
- Materials - ear cups: Aluminium
- Materials - ear pads: Cloth covered memory foam
|
- Professional circumaural hi-fi stereo studio headphones
- Self-adjusting headband for optimum fit
- Patented Varimotion speakers
- High noise attenuation
- For onstage and studio use
- Automute feature mutes headphones when they are taken off
- Leatherette and additional velvet ear pads
- Single-sided, detachable 3 m cable and additional 5 m coiled cable
The newly designed AKG legend, K 271 MK II combines the benefits of AKGʼs circumaural design for extreme comfort and a closed-back design for maximum isolation from ambient noise. Thanks to its XXL transducers, the K 271 MK II sounds clean, smooth and very rich.
The K 271 MK II is the perfect choice for any application where sonic bleed could cause problems such as broadcast work.
Another important feature of the K 271 MK II is the addition of a switch in the headband that mutes the audio just as soon as the headphones are taken off.
By the way, the K 271 MK II is also available as a headset with dynamic microphone (HSD 271) or condenser microphone (HSC 271).
|
HSD 171 without cable
Professional headset with hypercardioid, shock mounted, speech optimized, dynamic microphone. Main application: Live sound use. The microphone?s frequency range is 60-17,000 Hz with a sensitivity of 1 mV/Pa (-60 dBV). Impedance is 600 ohms. The headphone?s impedance is 55 ohms with an audio bandwidth of 18-26,000 Hz. Type: supra-aural, closed-back with self-adjusting headband. Microphone arm is swivelling through 270 degrees for left or right-hand use with integrated mute switch. Net/shipping weight: 255/725g (9/25.4 oz.) | The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced low-frequency performance
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- Convenient single-side cable exit
Specifications
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: Copper-clad aluminum wire
- Frequency Response: 15 - 20,000 Hz
- Maximum Input Power: 700 mW at 1 kHz
- Sensitivity: 96 dB
- Impedance: 47 ohms
- Weight: 190 g (6.7 oz), without cable and connector
- Cable: 3.0 m (9.8'), straight, left-side exit
- Accessory Included: 6.3 mm (1/4“) snap-on adapter
|
- Professional circumaural hi-fi stereo studio headphones
- Self-adjusting headband for optimum fit
- Patented Varimotion speakers
- High noise attenuation
- For onstage and studio use
- Automute feature mutes headphones when they are taken off
- Leatherette and additional velvet ear pads
- Single-sided, detachable 3 m cable and additional 5 m coiled cable
The newly designed AKG legend, K 271 MK II combines the benefits of AKGʼs circumaural design for extreme comfort and a closed-back design for maximum isolation from ambient noise. Thanks to its XXL transducers, the K 271 MK II sounds clean, smooth and very rich.
The K 271 MK II is the perfect choice for any application where sonic bleed could cause problems such as broadcast work.
Another important feature of the K 271 MK II is the addition of a switch in the headband that mutes the audio just as soon as the headphones are taken off.
Type |
closed-back, dynamic headphones |
Sensitivity |
91 dB/mW, 104 dB/V |
Frequency range |
16 to 28,000 Hz |
Rated impedance |
55 ohms |
Max. input power |
200 mW |
Earpads |
leatherette und velvet |
Cable |
3 m single-sided and 5 m coiled cable (99,9% oxygen-free); plug-in cable on headphones (mini-XLR connector) |
Connector |
gold plated stereo mini jack |
Adapter |
gold plated 1/8" to 1/4" screw-on adapter |
Net weight (without cable) |
240 g (8.5 oz.) |
Shipping weight |
550 g (19.4 oz.) |
Patent(s) |
Varimotion – multiple-thickness diaphragm for dynamic transducer (Patent no. AT 403.751, US 6,185,809, EP 814.637 (DE, DK, FI, FR, GB, IT, NL), JP 3.927.651); Acoustics slot resistor for dynamic transducer (Patent no. AT 408.706, US 6,639,991, ZL 01116806) |
| Beyerdynamic DT 150
The DT 150 is a dynamic studio headphone for use in broadcasting, film and recording studios
and other audio monitoring applications where size, comfort and performance are primarily requirements.
Due to its closed design it features excellent ambient noise isolation for reference monitoring.
- Transducer type: Dynamic
- Operating principle: Closed
- Frequency response: 5 - 30,000 Hz
- Nominal impedance: 250 Ω
- Nominal SPL: 97 dB
- Power handling capacity: 100 mW
- Sound coupling to the ear: Circumaural
- Headband pressure: 4.5 N
- Ambient noise attenuation: approx. 20 dBA
- Weight (without cable): 250 g
|
Reviews
There are no reviews yet.