| Content | Neutrik 3FXX Female XLR Cable Connectors / XX Series
The next generation of the worldwide accepted standard. Female connector with cage type contacts,
“solder stop" for ease soldering and additional ground contact for best contact integrity between
chassis and cable connector. Male connector without locking "window“; more stringent housing.
Rugged diecast shell in sleek and ergonomic design.
NC3FXX
3 pole cable connector, female. Nickel housing and silver contacts.
TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: 3 m Ohm
Insulation resistance
- initial: > 2 G Ohm
- after damp heat test: > 1 G Ohm
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: 4 pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: Zinc diecast ZnAl4Cu1, gal Ni over Cu plating
Insert: Polyamide PA 6.6 30% GR (glass reinforced)
Contacts: Bronze CuSn8
Contact surface: gal 2 m Ag silver
Latch lock: ZnAl4Cu1
Strain-relief clamp: POM
Antikink bushing: PA + PU
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20 |
The handy dust protection cover can be used, when no cable connector is mated. The cover is
easy to use and does not block the connectors in the panel below when not in use.
Suitable for male chassis connectors. | NC3FXX-B
3 pole cable connector, female. Black metal housing and gold contacts.
TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m Ohm
Insulation resistance
- initial: > 2 G Ohm
- after damp heat test: > 1 G Ohm
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4 pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: Zinc diecast ZnAl4Cu1, gal Cr over Cu plating
Insert: Polyamide PA 6.6 30% GR (glass reinforced)
Contacts: Bronze CuSn8
Contact surface: gal 0.2 ?m Au hard alloy over 2 ?m Ni
Latch lock: ZnAl4Cu1
Strain-relief clamp: POM
Antikink bushing: PA + PU
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard |
Female heavy duty, metal boot with rubber jacket, water protected, IP65.
Electrical Specifications:
* Number of contacts: 5
* Contact resistance: = 3 m ohm
* Insulation resistance, initial: > 2 G ohm; after damp
heat test: > 1 G ohm
* Dielectric strength: 1500 V dc
* Rated current: 7.5 A
* AWG: 2.5 mm²/14 AWG
* Capacitance between contacts: = 4pF
Mechanical Specifications:
* Lifetime: >1000 cycles
* Insertion / withdrawal force: = 20 N
* Cable O.D. range: 3.5 mm - 8.0 mm
Material Specifications:
* Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating
* Shell (male): stainless steel and zinc diecasting combined.
* Insert: PA 6.6 30% GR (glass reinforced)
* Contacts: CuSn6
* Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard
alloy over 2 ?m Ni
* Latch lock (female): St3K32
* Strain-relief clamp: POM
* Antikink bushing: PUR
* Sealing jacket: EPDM
Environmental Specifications:
* Temperature range: -30° C to + 80° C
* Flammability: UL 94HB
* Solderability: complies with IEC 68-2-20
* Protection class: IP 65
* Compatibility: IEC 61076-2-103 standard
| NC3MXX-B
3 pole cable connector, male. Black metal housing and gold contacts.
The 3 Pole Male Cable Connector from Neutrik is manufactured with a black metal housing and gold contacts.
It is reliable, easy to assemble and improves contact integrity as well as cable strain relief.
Male connector with improved locking recess without "window“, more stringent housing increases durability Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster Boot with polyurethane gland gives high protection to cable bending stresses Colored rings and boots available for coding or identification Sleek and ergonomic design - valuable and handy Rugged zinc diecast shell, longlasting and dependable Internal thread on shell is well proteced against any damage TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m Ohm
Insulation resistance
- initial: > 2 G Ohm
- after damp heat test: > 1 G Ohm
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4 pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: Zinc diecast ZnAl4Cu1, gal Cr over Cu plating
Insert: Polyamide PA 6.6 30% GR (glass reinforced)
Contacts: Brass (CuZn39Pb3)
Contact surface: gal 0.2 ?m Au hard alloy over 2 ?m Ni
Strain-relief clamp: POM
Antikink bushing: PA + PU
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard |
Male, heavy duty version with metal boot and stainless steel shell.
Electrical Specifications:
* Number of contacts: 4
* Contact resistance: = 3 m ohm
* Insulation resistance, initial: > 2 G ohm; after damp
heat test: > 1 G ohm
* Dielectric strength: 1500 V dc
* Rated current: 10 A
* AWG: 2.5 mm²/14 AWG
* Capacitance between contacts: = 4pF
Mechanical Specifications:
* Lifetime: >1000 cycles
* Insertion / withdrawal force: = 20 N
* Cable O.D. range: 3.5 mm - 8.0 mm
Material Specifications:
* Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating
* Shell (male): stainless steel and zinc diecasting combined.
* Insert: PA 6.6 30% GR (glass reinforced)
* Contacts: CuZn39Pb3
* Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard
alloy over 2 ?m Ni
* Strain-relief clamp: POM
* Antikink bushing: PUR
* Sealing jacket: EPDM |
Reviews
There are no reviews yet.