| Content |
BNC Bulkhead Chassis Connectors. Based on a new production technology,
the machined brass connector body provides and extremely rugged and non-
abrasive connection over long term use. They are an ideal combination when
used in conjunction with Neutrik 75 ohm BNC Rear Twist or Push-Pull cable
connectors. Available in isolated or grounded versions, in "D" shaped housing
or single feed through chassis mountings. Isolated versions solve potential
grounding problems and prevent common-mode influence with other connections
conducted over the same panel ground potential. Gold plated center contact.
Excellent return loss / VSWR rating.
? Connector Type: BNC Grounded Chassis w/Solder Tabs ? Housing: "D" Series
? Shell Color: Nickel | Βύσμα σασσί D-shape για CAT6A, shielded, IDC termination, nickel housing.
D-shape CAT6A panel connector, shielded, IDC termination, nickel housing
Attention! Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.
Features & Benefits
- Ruggedized connector with CAT6A component compliance according to ISO/IEC 11801 and TIA/EIA 568-C.2
- PoE++ compliant according to 802.3bt Type4
- Rugged latch lock system million fold proven
- Intermateable with the existing etherCON CAT5 range
- Shielded system - high noise immunity and EMI protection
Technical Information
| Product |
|
| Title |
NE8FDX-Y6 |
| Gender |
female |
| Electrical |
|
| Dielectric strength |
1 kVdc |
| Insulation resistance |
> 0.5 GΩ |
| Rated current per contact |
1.5 A |
| Transmission performance |
CAT6A, acc. TIA/EIA rating
CAT6A, acc. IEC/ISO/EN rating |
| Power over Ethernet |
PoE++ acc. IEEE 802.3bt |
| Mechanical |
|
| Lifetime |
> 1000 mating cycles |
| Wiresize |
|
| Wiresize |
solid: AWG 26/1 - AWG 22/1
stranded: AWG 26/7 - AWG 22/7 |
| Locking device |
Latch lock |
| Mounting direction |
Front mounting |
| Insulation diameter |
0.85 - 1.6 mm |
| Material |
|
| Contact plating |
Au |
| Shell |
Zinc diecast (ZnAl4Cu1) |
| Shell plating |
Nickel |
| Environmental |
|
| Flammability |
UL 94 V-0 |
| Temperature range |
-40 °C to + 70 °C |
|
• Simply & Professional appearance for BNC cabling
• Easier for camera installation, save time and more securer cable connection
• Better quality termination
• No electrical tap, No splicing, no crimping, but only a small screw driver
• Material: Copper Pin and Zinc Alloy Body
| Impedance |
50Ω,75Ω |
Frequency range |
0~2GHz |
| Resistanc |
Inner conductor ≤2.0mΩ |
External resistance |
≤0.2mΩ |
| Insulation Resistance |
≥5000MΩ |
Medium pressure |
1500V |
| Durability |
500 times |
Center Pin |
zinc alloy |
| Materials |
zinc alloy |
Frequency response |
DC to 8 MHz |
| Attenuation |
0.5dB typ |
Humidity |
0 to 95% |
| Storage |
-30°C to +70°C |
Material |
ABS Zinc |
| Wire Type |
coaxial cable |
Center Contact |
≤ 1.5 ohm |
| DC Loop Resistance |
52 ohms per 1,000 ft |
Environmental |
-10°C to +70°C |
| Withstand Voltage |
1500V rms |
|
|
| Outer Contact: |
≤ 1 ohm |
|
|
|
BNC Bulkhead Chassis Connectors. Based on a new production technology,
the machined brass connector body provides and extremely rugged and non-
abrasive connection over long term use. They are an ideal combination when
used in conjunction with Neutrik 75 ohm BNC Rear Twist or Push-Pull cable
connectors. Available in isolated or grounded versions, in "D" shaped housing
or single feed through chassis mountings. Isolated versions solve potential
grounding problems and prevent common-mode influence with other connections
conducted over the same panel ground potential. Gold plated center contact.
Excellent return loss / VSWR rating.
? Connector Type: BNC Grounded Chassis w/Solder Tabs ? Housing: "D" Series
? Shell Color: Black |
BNC Bulkhead Chassis Connectors. Based on a new production technology,
the machined brass connector body provides and extremely rugged and non-
abrasive connection over long term use. They are an ideal combination when
used in conjunction with Neutrik 75 ohm BNC Rear Twist or Push-Pull cable
connectors. Available in isolated or grounded versions, in "D" shaped housing
or single feed through chassis mountings. Isolated versions solve potential
grounding problems and prevent common-mode influence with other connections
conducted over the same panel ground potential. Gold plated center contact.
Excellent return loss / VSWR rating.
? Connector Type: BNC Isolated Chassis w/Solder Tabs ? Housing: n/a
? Shell Color: Nickel | Adam Hall Connectors 4 STAR C CAT 5
Network plug | Cat.5e
- Standard Cat.5e RJ45 connector from our 4 Star Series
- With screwable grommet and lockable protective housing
- Completely shielded against electrical interference
- For cable diameters from 5 - 6.8 mm
Product type
Plugs and Connectors
Type
Other Plugs and Connectors
|
Reviews
There are no reviews yet.