| Content | XLR Cable Connectors / FXS Type
FX connector with noiseless ON-OFF switch short-circuiting contacts 2+3.
For use with a microphone without switch.
TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m
Insulation resistance - initial: > 2 G
- after damp heat test: > 1 G
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating
Insert: PA 6.6 30% GR (glass reinforced)
Contacts: - female: CuSn6
- male: CuZn39Pb3
Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard
alloy over 2 ?m Ni
Latch lock (female): St3K32
Strain-relief clamp: POM
Antikink bushing: PUR
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard |
B-NE5-MPD - XLR chassis male 5pin D-type | B-NE3MX - XLR male extension 3pin |
Neutrik NC5FD-LX-BAG 5-pin XLR Female Connector
Universal D-size metal body XLR panel mount series. UL recognized component.
5 pole female receptacle, solder cups, black metal housing, silver contacts
Features & Benefits
Robust "D" metal shell
Standardized D sized 24 mm panel cutout
Solder cups on 3 - 7 pole version
Product
Connector Type XLR
Gender female
Electrical
Capacitance between contacts ??? 7 pF
Contact resistance ??? 5 m?©
Dielectric strength 1,5 kVdc
Insulation resistance > 2 G?© (initial)
Insulation resistance > 1 G?© (after damp heat test)
Rated current per contact 7,5 A
Rated voltage 50 V
Mechanical
Insertion force ??? 20 N
Withdrawal force ??? 20 N
Lifetime > 1000 mating cycles
Wire size max. 1.0 mm?²
Wire size max. 18 AWG
Wiring Solder contacts
Locking device latch lock
Mounting direction front & rear
Chassis shape D
Material
Contact plating 2 ??m Ag over 2 ??m Ni
Contacts Brass (CuZn39Pb3)
Insert Polyamide (PA 6.6 30 % GR)
Locking element Steel Ck67
Shell Zinc diecast (ZnAl4Cu1)
Shell plating Black chromium
Environmental
Approvals UL
Flammability UL 94 HB
Standard compliance IEC 61076-2-103
Solderability Complies with IEC 68-2-20
Temperature range -30 ?°C to +80 ?°C |
The handy dust protection cover can be used, when no cable connector is mated. The cover is
easy to use and does not block the connectors in the panel below when not in use.
Suitable for male chassis connectors. |
Male, heavy duty version with metal boot and stainless steel shell.
Electrical Specifications:
* Number of contacts: 4
* Contact resistance: = 3 m ohm
* Insulation resistance, initial: > 2 G ohm; after damp
heat test: > 1 G ohm
* Dielectric strength: 1500 V dc
* Rated current: 10 A
* AWG: 2.5 mm²/14 AWG
* Capacitance between contacts: = 4pF
Mechanical Specifications:
* Lifetime: >1000 cycles
* Insertion / withdrawal force: = 20 N
* Cable O.D. range: 3.5 mm - 8.0 mm
Material Specifications:
* Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating
* Shell (male): stainless steel and zinc diecasting combined.
* Insert: PA 6.6 30% GR (glass reinforced)
* Contacts: CuZn39Pb3
* Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard
alloy over 2 ?m Ni
* Strain-relief clamp: POM
* Antikink bushing: PUR
* Sealing jacket: EPDM |
Reviews
There are no reviews yet.