| Content |
- Accommodates NE8MC* or any standard RJ45 plug
- The adapter offers the approved latch lock system
- The D shape adapters are problem solvers for various intermating problems for professional and semi-professional applications
| Electrical |
|
| Contact resistance |
< 10 mΩ |
| Dielectric strength |
1 kVdc |
| Frequencyrange |
1 - 100 MHz |
| Insulation resistance |
> 0.5 GΩ |
| Rated current per contact |
1,5 A |
| Rated voltage |
< 50 V |
| Standard compliance |
TIA/EIA 586B, IEC11801 |
| Mechanical |
|
| Insertion force |
≤ 20 N |
| Withdrawal force |
≤ 20 N |
| Lifetime |
> 1000 mating cycles |
| Wiresize |
|
| Locking device |
Latch lock |
| Material |
|
| Contact plating |
0.2 µm Au over Ni plating |
| Contacts |
Bronze (CuSn8) |
| Insert |
PBTP 15 % GR |
| Shell |
AlMgSi 0.5, black plated |
| Strain relief |
CuZn35Pb2, Tin plated |
| Environmental |
|
| Flammability |
UL 94 HB |
| Temperature range |
-30 °C to +80 °C |
| Product |
|
| Title |
NE8FF |
| Connection Type |
Adapter |
| Gender |
female |
| |
• Simply & Professional appearance for BNC cabling
• Easier for camera installation, save time and more securer cable connection
• Better quality termination
• No electrical tap, No splicing, no crimping, but only a small screw driver
• Material: Copper Pin and Zinc Alloy Body
| Impedance |
50Ω,75Ω |
Frequency range |
0~2GHz |
| Resistanc |
Inner conductor ≤2.0mΩ |
External resistance |
≤0.2mΩ |
| Insulation Resistance |
≥5000MΩ |
Medium pressure |
1500V |
| Durability |
500 times |
Center Pin |
zinc alloy |
| Materials |
zinc alloy |
Frequency response |
DC to 8 MHz |
| Attenuation |
0.5dB typ |
Humidity |
0 to 95% |
| Storage |
-30°C to +70°C |
Material |
ABS Zinc |
| Wire Type |
coaxial cable |
Center Contact |
≤ 1.5 ohm |
| DC Loop Resistance |
52 ohms per 1,000 ft |
Environmental |
-10°C to +70°C |
| Withstand Voltage |
1500V rms |
|
|
| Outer Contact: |
≤ 1 ohm |
|
|
| Adam Hall Connectors 4 STAR C CAT6
RJ45 Cat.6a connector
General
Product type
Plugs and Connectors
Type
Other Plugs and Connectors
Contacts Coating
50µm Gold
Housing
Die casting zinc alloy
Conductor diameter
1.2 - 1,65 mm
Cable diameter
7 - 8,5 mm
|
BNC Bulkhead Chassis Connectors. Based on a new production technology,
the machined brass connector body provides and extremely rugged and non-
abrasive connection over long term use. They are an ideal combination when
used in conjunction with Neutrik 75 ohm BNC Rear Twist or Push-Pull cable
connectors. Available in isolated or grounded versions, in "D" shaped housing
or single feed through chassis mountings. Isolated versions solve potential
grounding problems and prevent common-mode influence with other connections
conducted over the same panel ground potential. Gold plated center contact.
Excellent return loss / VSWR rating.
? Connector Type: BNC Isolated Chassis w/Solder Tabs ? Housing: "D" Series
? Shell Color: Nickel |
BNC Bulkhead Chassis Connectors. Based on a new production technology,
the machined brass connector body provides and extremely rugged and non-
abrasive connection over long term use. They are an ideal combination when
used in conjunction with Neutrik 75 ohm BNC Rear Twist or Push-Pull cable
connectors. Available in isolated or grounded versions, in "D" shaped housing
or single feed through chassis mountings. Isolated versions solve potential
grounding problems and prevent common-mode influence with other connections
conducted over the same panel ground potential. Gold plated center contact.
Excellent return loss / VSWR rating.
? Connector Type: BNC Grounded Chassis w/Solder Tabs ? Housing: "D" Series
? Shell Color: Nickel |
Reviews
There are no reviews yet.