Content |
Neutrik E8 MC-B-1 Cable Connector Carrier black water-protected IP54
The connector carrier consists of a black chrome shell, fixing disk, chuck, brush, and boot. The boot (identical with the XLR X series) is suitable for cable diameters of 3.5 - 8 mm. For bulk cable. RJ45 plug not included.
The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust, lockable solution.The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust lockable solution.
Product type
Plugs and Connectors
Type
Other Plugs and Connectors
Gender
male
Temperature range
-30 to 80 °C
Cable diameter
max. 8 mm
Housing
die-cast zinc
Weight
0,03 kg
|
BNC Bulkhead Chassis Connectors. Based on a new production technology, the machined brass connector body provides and extremely rugged and non- abrasive connection over long term use. They are an ideal combination when used in conjunction with Neutrik 75 ohm BNC Rear Twist or Push-Pull cable connectors. Available in isolated or grounded versions, in "D" shaped housing or single feed through chassis mountings. Isolated versions solve potential grounding problems and prevent common-mode influence with other connections conducted over the same panel ground potential. Gold plated center contact. Excellent return loss / VSWR rating.
? Connector Type: BNC Isolated Chassis w/Solder Tabs ? Housing: "D" Series ? Shell Color: Black | |
15 pole D-SUB feedthrough, female to female, D-shape nickel housing - Ideal for audio networking and integration of equipment into video systems
- Universally accepted standard D-shape housing
|
BNC Bulkhead Chassis Connectors. Based on a new production technology, the machined brass connector body provides and extremely rugged and non- abrasive connection over long term use. They are an ideal combination when used in conjunction with Neutrik 75 ohm BNC Rear Twist or Push-Pull cable connectors. Available in isolated or grounded versions, in "D" shaped housing or single feed through chassis mountings. Isolated versions solve potential grounding problems and prevent common-mode influence with other connections conducted over the same panel ground potential. Gold plated center contact. Excellent return loss / VSWR rating.
? Connector Type: BNC Grounded Chassis w/Solder Tabs ? Housing: "D" Series ? Shell Color: Nickel | Βύσμα σασσί D-shape για CAT6A, shielded, IDC termination, nickel housing.
D-shape CAT6A panel connector, shielded, IDC termination, nickel housing
Attention! Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.
Features & Benefits
- Ruggedized connector with CAT6A component compliance according to ISO/IEC 11801 and TIA/EIA 568-C.2
- PoE++ compliant according to 802.3bt Type4
- Rugged latch lock system million fold proven
- Intermateable with the existing etherCON CAT5 range
- Shielded system - high noise immunity and EMI protection
Technical Information
Product |
|
Title |
NE8FDX-Y6 |
Gender |
female |
Electrical |
|
Dielectric strength |
1 kVdc |
Insulation resistance |
> 0.5 GΩ |
Rated current per contact |
1.5 A |
Transmission performance |
CAT6A, acc. TIA/EIA rating
CAT6A, acc. IEC/ISO/EN rating |
Power over Ethernet |
PoE++ acc. IEEE 802.3bt |
Mechanical |
|
Lifetime |
> 1000 mating cycles |
Wiresize |
|
Wiresize |
solid: AWG 26/1 - AWG 22/1
stranded: AWG 26/7 - AWG 22/7 |
Locking device |
Latch lock |
Mounting direction |
Front mounting |
Insulation diameter |
0.85 - 1.6 mm |
Material |
|
Contact plating |
Au |
Shell |
Zinc diecast (ZnAl4Cu1) |
Shell plating |
Nickel |
Environmental |
|
Flammability |
UL 94 V-0 |
Temperature range |
-40 °C to + 70 °C |
|
Reviews
There are no reviews yet.