Content |
Neutrik E8 MC-B-1 Cable Connector Carrier black water-protected IP54
The connector carrier consists of a black chrome shell, fixing disk, chuck, brush, and boot. The boot (identical with the XLR X series) is suitable for cable diameters of 3.5 - 8 mm. For bulk cable. RJ45 plug not included.
The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust, lockable solution.The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust lockable solution.
Product type
Plugs and Connectors
Type
Other Plugs and Connectors
Gender
male
Temperature range
-30 to 80 °C
Cable diameter
max. 8 mm
Housing
die-cast zinc
Weight
0,03 kg
|
- Accommodates NE8MC* or any standard RJ45 plug
- The adapter offers the approved latch lock system
- The D shape adapters are problem solvers for various intermating problems for professional and semi-professional applications
Electrical |
|
Contact resistance |
< 10 mΩ |
Dielectric strength |
1 kVdc |
Frequencyrange |
1 - 100 MHz |
Insulation resistance |
> 0.5 GΩ |
Rated current per contact |
1,5 A |
Rated voltage |
< 50 V |
Standard compliance |
TIA/EIA 586B, IEC11801 |
Mechanical |
|
Insertion force |
≤ 20 N |
Withdrawal force |
≤ 20 N |
Lifetime |
> 1000 mating cycles |
Wiresize |
|
Locking device |
Latch lock |
Material |
|
Contact plating |
0.2 µm Au over Ni plating |
Contacts |
Bronze (CuSn8) |
Insert |
PBTP 15 % GR |
Shell |
AlMgSi 0.5, black plated |
Strain relief |
CuZn35Pb2, Tin plated |
Environmental |
|
Flammability |
UL 94 HB |
Temperature range |
-30 °C to +80 °C |
Product |
|
Title |
NE8FF |
Connection Type |
Adapter |
Gender |
female |
|
• Simply & Professional appearance for BNC cabling
• Easier for camera installation, save time and more securer cable connection
• Better quality termination
• No electrical tap, No splicing, no crimping, but only a small screw driver
• Material: Copper Pin and Zinc Alloy Body
Impedance |
50Ω,75Ω |
Frequency range |
0~2GHz |
Resistanc |
Inner conductor ≤2.0mΩ |
External resistance |
≤0.2mΩ |
Insulation Resistance |
≥5000MΩ |
Medium pressure |
1500V |
Durability |
500 times |
Center Pin |
zinc alloy |
Materials |
zinc alloy |
Frequency response |
DC to 8 MHz |
Attenuation |
0.5dB typ |
Humidity |
0 to 95% |
Storage |
-30°C to +70°C |
Material |
ABS Zinc |
Wire Type |
coaxial cable |
Center Contact |
≤ 1.5 ohm |
DC Loop Resistance |
52 ohms per 1,000 ft |
Environmental |
-10°C to +70°C |
Withstand Voltage |
1500V rms |
|
|
Outer Contact: |
≤ 1 ohm |
|
|
| |
EtherCon? ruggedized RJ45 connectors provide solutions for data transfer in harsh demanding environments by offering a cable carrier and receptacle that helps to protect the contacts of the RJ45 connections. Designed to protect the fragile latch and cover of standard RJ45 connectors from breakage, you will find uses for this connector system in Ethernet networking of audio, commercial, entertainment, stage production, DMX lighting, industrial and outdoor Internet access applications.
The Ethercon series offers both male cable carriers and assembled female receptacles. The cable end offers a robust diecast shell as a carrier for pre- assembled RJ45 plugs. Female chassis connectors are based on the current Neutrik "A" series as well the "D" series of XLR receptacles with secure latching system - a feature not found on other RJ45 receptacles. Termination is offered in both IDC Krone and IDC 110 punch down terminals. Neutrik Ethercon products comply with Category 5 shielded or unshielded and are compatible for use with 10 Base-T and 100 Base-TX systems. ? Connector type: Receptacle, IDC Krone terminals, "A" style ? Mfg. #NE8FAV-YK |
BNC Bulkhead Chassis Connectors. Based on a new production technology, the machined brass connector body provides and extremely rugged and non- abrasive connection over long term use. They are an ideal combination when used in conjunction with Neutrik 75 ohm BNC Rear Twist or Push-Pull cable connectors. Available in isolated or grounded versions, in "D" shaped housing or single feed through chassis mountings. Isolated versions solve potential grounding problems and prevent common-mode influence with other connections conducted over the same panel ground potential. Gold plated center contact. Excellent return loss / VSWR rating.
? Connector Type: BNC Isolated Chassis w/Solder Tabs ? Housing: "D" Series ? Shell Color: Nickel |
Reviews
There are no reviews yet.