| Content |
Neutrik E8 MC-B-1
Cable Connector Carrier black water-protected IP54
The connector carrier consists of a black chrome shell, fixing disk, chuck, brush, and boot. The boot (identical with the XLR X series) is suitable for cable diameters of 3.5 - 8 mm. For bulk cable. RJ45 plug not included.
The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust, lockable solution.The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust lockable solution.
Product type
Plugs and Connectors
Type
Other Plugs and Connectors
Gender
male
Temperature range
-30 to 80 °C
Cable diameter
max. 8 mm
Housing
die-cast zinc
Weight
0,03 kg
|
- For Pre-Assembled RJ45 Plugs
- Lockable Cable Connection Carrier
- Die-Cast Shell with Bushing & Boot
- Up to 0.31" Cable Diameter
- Chuck-Style Strain Relief
- RJ45 Plug Not Included
RJ45 cable connector carrier for pre-assembled RJ45 plugs consists of black chromium shell, bushing and boot. Packed with two cable protection elements for cable diameter up to 8 mm. Cable connector carrier does not include a RJ45 plug.
The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust lockable solution.
ATTENTION: Does not intermate with the CAT6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B.
Neutrik NE8MX-B Overview
Upgrade the protection of a pre-assembled RJ45 plug with the NE8MX-B etherCON RJ45 Cable Connector Carrier for Pre-Assembled RJ45 Plugs from Neutrik. Boasting a black chromium die-cast shell, bushing, and boot, the NE8MX-B comes with chuck-style strain relief, as well as two cable-protection elements for cable diameters up to 0.31".
Note: The NE8MX-B does not include an RJ45 plug, and it does not intermate with Neutrik NE8FDY-C6 and NE8FDY-C6-B Cat 6 chassis connectors.
Ideal for harsh and demanding environments, the NE8MX-B is designed to protect Ethernet connections in a variety of commercial applications, and it helps to prevent breakage of the fragile components of standard RJ45 connectors. The carrier allows for the assembly of pre-assembled conventional RJ45 cables.
AMP
- 5-554169-3
- 5-554720-3
- 5-554739-3
- 5-558530-2
- 5-558530-3
- 5-569530-3
- 5-569532-2
Black Box
- FM731
- FM730
Bomar
- 300068S
- 300568
DRAHTEX
- 220.0100
- 220.0200
- 220.0201
Eucon
- MPS-88R30
- MP-88R30
Hirose
- TM11
- TM21
- TM31
Nippon Seisen
- NSP624-S
Stewart
- SS-37000-002
Vertical Cable
- 012-021
|
BNC Bulkhead Chassis Connectors. Based on a new production technology,
the machined brass connector body provides and extremely rugged and non-
abrasive connection over long term use. They are an ideal combination when
used in conjunction with Neutrik 75 ohm BNC Rear Twist or Push-Pull cable
connectors. Available in isolated or grounded versions, in "D" shaped housing
or single feed through chassis mountings. Isolated versions solve potential
grounding problems and prevent common-mode influence with other connections
conducted over the same panel ground potential. Gold plated center contact.
Excellent return loss / VSWR rating.
? Connector Type: BNC Grounded Chassis w/Solder Tabs ? Housing: "D" Series
? Shell Color: Nickel |
BNC Bulkhead Chassis Connectors. Based on a new production technology,
the machined brass connector body provides and extremely rugged and non-
abrasive connection over long term use. They are an ideal combination when
used in conjunction with Neutrik 75 ohm BNC Rear Twist or Push-Pull cable
connectors. Available in isolated or grounded versions, in "D" shaped housing
or single feed through chassis mountings. Isolated versions solve potential
grounding problems and prevent common-mode influence with other connections
conducted over the same panel ground potential. Gold plated center contact.
Excellent return loss / VSWR rating.
? Connector Type: BNC Grounded Chassis w/Solder Tabs ? Housing: "D" Series
? Shell Color: Black | Neutrik introduces BNC 75W cable connectors in push-pull and rear-twist versions.
Featuring a true 75W design that meets the stringent requirements of HDTV/DVD,
these connectors sustain consistent impedance at high frequencies up to 3 GHz,
are easy to handle in high density applications such as video patchbays and switchers,
show excellent return loss and VSWR, consist of machined parts that are precisely
made to our high standards and offer a center pin assembly with a snug fit to provide
tactile indication when the contact is snapped into position.
Push-Pull BNC Cable Connector
* Unique push-pull locking system is ideal for ultra high-density applications, patching, etc.
* Assembly is fast and easy a requires only a standard center contact crimp (.063“/1.60 mm)
after cable prep
* Use of a standard crimp size eliminates the need for different crimp dies and facilitates
field repair
* Innovative screw lock cable retention with the jacket providing superior pull strength
* Standard color is black, optional colored boots available
* For use with cable types: Belden 1694A, Commscope 5765, ELF Inc. Cable, Eupen 705
CRT 5V-HS, Gepco VSD2001, Nokia/Draka 1.0/4.8 AF, Suhner S05133-07, Suhner S05163-02 |
BNC Bulkhead Chassis Connectors. Based on a new production technology,
the machined brass connector body provides and extremely rugged and non-
abrasive connection over long term use. They are an ideal combination when
used in conjunction with Neutrik 75 ohm BNC Rear Twist or Push-Pull cable
connectors. Available in isolated or grounded versions, in "D" shaped housing
or single feed through chassis mountings. Isolated versions solve potential
grounding problems and prevent common-mode influence with other connections
conducted over the same panel ground potential. Gold plated center contact.
Excellent return loss / VSWR rating.
? Connector Type: BNC Isolated Chassis w/Solder Tabs ? Housing: "D" Series
? Shell Color: Nickel |
Reviews
There are no reviews yet.