NEUTRIK NPPA-TT-E56 Patchbay

Neutrik NPPA-TT-E56 Bantam Patchbay, 19“, programm able on the front“, high end connections, half normalled, 6x56 pin ELCO plugs, 1 unit

2 x 24 TB (BP0316/MIL-P-642/2) jacks, half normalled bottom row (not programmable), solder terminals

The NPP-TB patch panels are equipped with gold plated, high quality long life NJ6TB-V Jacks for BPO/MIL style plugs. The panels are easily programmable for six switching configurations and offer a flexible grounding system. The NPP-TB patch panels are very robust and compactly designed for 19" rack mount (19" x 1U) with galvanized metal housing and a built-in cable bar on the rear for securing wires. There is a rear extension bar (NPP-S) available as an option. On the front side there is an attractive additional lettering area for each channel pair with a marking strip and individual snap-on colour coding plates.

• 2 x 24 Neutrik NJ6TB-V long frame 1/4" TRS jacks acc. to BPO 316 / MIL-P-641/3
• Very robust and compact galvanized metal housing
• Eye catching channel identification through colored snap-on coding tabs
• Qualified for analog and digital signals acc. AES3, 48 kHz sampling frequency
• With high quality long life gold plated Neutrik jacks
• Flexible grounding system

The Press Patch Box is a special kind of audio signal distributor intended for use at press conferences. It features separate inputs for microphone and line signals (from a mixing console output).

Also available as stereo version (PPB20S)

A high quality input amplifier with a transformer balanced input provides a wide dynamic range. A total of 20 transformer-balanced XLR/m outputs with separate paired driver circuits make it possible to connect up video cameras and other recording equipment.

The nominal output level is +4 dBu at 600 Ω. Channels 19 and 20 have TRS jack sockets for balanced/unbalanced signals and also phono sockets (-10 dBu nominal level).

Where more than 20 outputs are required, additional PPB 20s can be hooked up via a rear BUS IN/OUT socket. Signal monitoring is provided by a 10 LED strip displaying a range of -40 to +10 dB (0 dB in the display = 4 dBu output) and an adjustable headphones amplifier.

The PPB20 has an integral, shielded power supply unit. An extra DC input makes it possible to connect up a (backup) battery power source. A PW4 can provide the necessary backup power supply for two PPB20s.

Input:

• Transformer-balanced, 4 XLR/f sockets, with paired front/rear parallel connections for separate microphone/line signals.
• Nominal Input Impedances: Microphones 200 Ω, Line = 5 kΩ
• Max. input levels: microphones = 0 dBu, Line = +20 dBu
• Max. amplification: microphones = +66 dB, Line = +22 dB (constantly adjustable via switch and potentiometer).

Output:

• 20 XLR/m, 2x TRS jack, 2x phono, all transformer-balanced and floating with separate ground lift switches at rear
• Nominal output impedances: XLR = 300 Ω, jack and phono = 600 Ω
• Nominal output levels: XLR = +4 dBu/20 dBu max.; jack/phono = -10 dBu, + 6 dBu max
• Headphones output: Stereo jack socket, with mono tip + ring, Designed for use with 8 Ω - 200 Ω headphones (constantly adjustable level).
• 10 LED strips displaying a range of -40 to +10 dB.
• Bus input/output (mono jack)
• Power Supply: 230 VAC or ± 12 V to ± 18 VDC, 15 Watts.
• Housing: 19'', 3 U, approx. 200 mm deep.

Easy Patch` Patch Panel, 2 x 48 TT (Bantam) jacks, half normalled,

Easy Patch` Patch Panel, 2 x 48 TT (Bantam) jacks, half normalled bottom row, 288 solder terminals for fixed installations - cost effective, including top and bottom cover

• Patch Points: 48 (2 rows of 24)
• Jacks: 1/4 inch phone, balanced or unbalanced, nickel-silver, self-cleaning contacts
• Normalling: Half-normalled or de-normalled (user configurable)
• Chassis Dimensions (H x W x D): 1.75 x 19 x 2.6 inches (44mm x 482mm x 68mm)
• Module Dimensions (H x W x D): 1.4 x 0.6 x 2.6 inches (40mm x 18mm x 68mm)
• Shipping Weight: 2.3 lb (1.1 kg)