Price | €1,537.59 €1,384.00 incl. GR VAT | €1,450.79 €1,306.00 incl. GR VAT | €1,701.19 €1,033.24 incl. GR VAT | €1,674.00 €1,507.00 incl. GR VAT | €1,512.79 €1,362.00 incl. GR VAT | €1,116.00 €1,004.00 incl. GR VAT |
Content |
2 x 48 TT (Bantam) jacks, half normalled bottom row, 288 push terminals, individual grounding
All NPPA patch panels are fitted with high quality, long life NJ3TTA gold plated double contact jacks (2x48), featuring best contact integrity. The unit, robustly housed in a black coated steel shell, is finished off with a built in cable bar and two large channel identification strips for perfect management of the system. The NPPA patch panels are an innovative and compact patching system (just 1U high) for 19" rack mounting.
Features & Benefits - Innovative and compact patching system (just 1U high) for 19" rack mounting
- Robustly housed in a black coated steel shell
- High quality long life gold plated Neutrik prewired double jacks with best contact integrity
- Qualified for analog and digital signals acc. AES3, 48 kHz sampling frequency
- Mixed normalling configuration can be done by jack pairs (see accessories)
- Flexible grounding system (see Assembly Instruction)
|
Easy Patch` Patch Panel, 2 x 48 TT (Bantam) jacks, half normalled, |
The PPB10 is a compact version of the well known and established PPB20 from Palmer. The PPB10 is a 10 channel audio splitter for press conferences and other applications. On a transformer split basis, one line input is split out to ten outputs.
- All inputs and outputs are balanced transformer isolated
- Extremely reliable: Should one output be shorted, the other outputs remain unaffected
- Line input and outputs
- Adjustable input gain (-∞ to +25dB)
- Level meter
- Headphone output to monitor the input level, headphone volume adjustable
- Individual ground lift switches for each output
- Ground Lift switch for the input
- Expandable setup thanks to the Bus In/Out sockets - allowing you to cascade numerous PPB10 (or PPB20)
|
Neutrik NPPA-TT-E56 Bantam Patchbay, 19“, programm able on the front“, high end connections, half normalled, 6x56 pin ELCO plugs, 1 unit |
Easy Patch` Patch Panel, 2 x 48 TT (Bantam) jacks, half normalled (jumpers) - fast and easy wiring and change of normalling, 288 Krone-type IDC terminals, including top and bottom cover
Design Criteria
All panels are fitted with high quality, long life NJ3TTA gold plated double contact jacks (2x48), featuring drastically improved contact integrity. The unit is finished off with a built in cable bar and two large channel ident strips for perfect management of the system. The new generation of the Neutrik "Easy-Patch" is easily programmable for any one of five configurations (standard is half normalled bottom row) and for the grounding system of your choice. Each individual pair of jacks can be changed or reconfigured quickly and without fuss even while the panel is "on air“. The NJ3TTA jacks offer also two contact points per terminal (TRS) with a special designed mechanism for the normalling contact. Simply remove the front panel to reveal the easy access jack. Remove, replace or reconfigure the jack and refix the panel. The "Easy-Patch" is an innovative and compact patching system (just 1U high) for 19" rack mounting. Robustly housed in a black coated steel shell and featuring precision aluminium fittings it is built to last.
Grounding
The flexible grounding system provides the following versions:
Individual: Each channel is individually grounded by its corresponding cable shield (default configuration).
Group: Selected channel grounds are connected via the ground bus on the PCB using solder bridges and track cuts to form a group that is connected to one common cable shield.
Central: All channel grounds (individual top and bottom row) are connected via the ground bus on the PCB using solder bridges and wired with only one cable shield.
Chassis-Common: The same as central grounding but with the addition of the common ground bus (top and / or bottom rows) connected to the patch panel chassis by means of jumpers.
Features & Benefits
- Innovative and compact patching system (just 1U high) for 19" rack mounting
- Robustly housed in a black coated steel shell
- High quality long life gold plated Neutrik prewired double jacks with drastically improved contact integrity
- Qualified for analog and digital signals acc. AES3, 48 kHz sampling frequency
- Convenient change of normalling with the aid of jumpers
|
Easy Patch` Patch Panel, 2 x 48 TT (Bantam) jacks, half normalled bottom row, 288 solder terminals for fixed installations - cost effective, including top and bottom cover |
Reviews
There are no reviews yet.