Content |
5 poliger Chassisstecker, Erdung: Separater Massekontakt mit dem Gehäuse des Gegensteckers und Front Panel, vertikale Leiterplattenmontage
Einbaubuchsen nach dem neuesten Stand der Technik im runden Plastikgehäuse zur Panelmontage. Diese Buchsen mit kleinstem Einbaumass bieten eine sehr hohe Packdichte (23 mm zwischen den Steckerzentren). UL recognized component.
Features & Benefits
- Kleinster XLR Einbaustecker, höchste Packdichte
- Plastik Gehäuse, Stahl Verriegelung
- Polierter Kontaktbereich, hartvergoldet
- Gehäuse Entflammbarkeit UL94HB
Product type
Plugs and Connectors
Type
XLR Connectors
Poles
5
Gender
male
Contacts
brass
Connection type
Vertical PCB mounting
Colour
Black
Housing
polyamide
Length
30.2 mm
Diameter
25.3 mm
Weight
0,007 kg
| B-NE5MX - XLR male extension 5pin
NC5MX |
The handy dust protection cover can be used, when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel below when not in use. Suitable for male chassis connectors. | These compact, low profile, right angle cable connectors are designed to select any
of 7 positions in 45° increments by rotating the assembled insert into various indents
before securing the back cover. Connector type: XLR female.
Shell: Nickel. Contacts: Silver | XLR Cable Connectors / EMC-XLR
The EMC-XLR cable connector is the answer for a noise-safe audio signal connection.
3 pole male / female XLR cable connector with capacitive cable shield - shell connection
to avoid RF-interference and LF-noise. 360° shield contact on female connector ensures
best possible shielding and chassis contact.
TECHNICAL DATA
Electrical
Rated current per contact: 5 A
Shielding effectiveness: > 55 db@ 1 GHz
Cableshield - shell connection: capacitive
Cableshield - Pin 1 connection: EMI suppression bead
Contact resistance after lifetime: < 3 m Ohm
Insulation resistance: initial > G Ohm, > 1 G Ohm
Dielectric strength: 1500 V dc after damp heat test
Mechanical
Retention method: chuck type
Life time (mating cycles): > 1000 cycles
Cable O.D. range: 4 - 7 mm
Wiring: soldering (AWG 20 - AWG 24)
Solderability: complies with IEC 68-2-20
Materials
Contacts: Brass (CuZn39Pb3), gold plated
Shell, shield contact: Zinc diecast (ZnAl4Cu1)
Strain relief clamp: POM
Bushing: PA / PU
Insert: PA 6.6 30% GR
Environment
Temperature range: -30° C to +80° C
Flammability: UL 94 HB | XLR Cable Connectors / EMC-XLR
The EMC-XLR cable connector is the answer for a noise-safe audio signal connection.
3 pole male / female XLR cable connector with capacitive cable shield - shell connection
to avoid RF-interference and LF-noise. 360° shield contact on female connector ensures
best possible shielding and chassis contact.
TECHNICAL DATA
Electrical
Rated current per contact: 5 A
Shielding effectiveness: > 55 db@ 1 GHz
Cableshield - shell connection: capacitive
Cableshield - Pin 1 connection: EMI suppression bead
Contact resistance after lifetime: < 3 m Ohm
Insulation resistance: initial > G Ohm, > 1 G Ohm
Dielectric strength: 1500 V dc after damp heat test
Mechanical
Retention method: chuck type
Life time (mating cycles): > 1000 cycles
Cable O.D. range: 4 - 7 mm
Wiring: soldering (AWG 20 - AWG 24)
Solderability: complies with IEC 68-2-20
Materials
Contacts: Brass (CuZn39Pb3), gold plated
Shell, shield contact: Zinc diecast (ZnAl4Cu1)
Strain relief clamp: POM
Bushing: PA / PU
Insert: PA 6.6 30% GR
Environment
Temperature range: -30° C to +80° C
Flammability: UL 94 HB |
Reviews
There are no reviews yet.