| Content | INCREASED SPL/EXTENDED LF FOR NEXO PS15
NEXO is one of the worldʼs leading sound reinforcement loudspeaker manufacturers. Founded in 1979, the company is dedicated to crafting practical solutions with solid engineering. Each new design begins with a proprietary sophisticated computer simulation process that allows every parameter to be extensively modelled and simulated, leading to breakthrough cost and performance gains.
Nexoʼs comprehensive product line includes loudspeakers, analogue and digital control electronics and amplification; all designed to deliver consistent sound quality and longterm reliability for a broad range of applications. Continuing research drives all new product development
to deliver on our promise;
Sonic Innovation That Works.
The PS15 Bass increases PS15 Loudspeaker sound pressure levels in the 40 to 200 Hz regions for bass heavy applications and when single PS15s are used without the benefits of multiple cabinet coupling. The PS15 Bass is connected in parallel with a PS15 and doesnʼt require an additional controller or amplifier channel (providing the combined load is within the amplifierʼs specification). The PS15 Bass has the same size front and grill, so clusters are visually and acoustically coherent. Its deeper trapezoidal cabinet provides increased volume for extended bass response. The PS15 Loudspeaker System is the most powerful member of Nexoʼs acclaimed PS Series; versatile, compact, full-range loudspeakers tailored for a wide range of touring and installed sound reinforcement applications. Like all Nexo products, the PS15 Loudspeaker and optional PS15Bass and LS1200 Subwoofer are designed to work with advanced electronic processors, guaranteeing consistent performance and reliability of the highest standard.
PRODUCT FEATURES
Components : LF 1 x 15" (38 cm) 6 Ohm driver
Height x Width x Depth 675 x 434 x 457 mm (26.63" x 17.13" x 18“)
Weight 26 kg (57 lbs)
Connectors 3 x NL4MP SPEAKON 4 pole; Passive In Passive Loop Thru, Active In
Construction Baltic Birch Ply finished with textured, polyurethane black coating
Fittings: Handles 2, integral to cabinet
Front finish Acoustic foam on perforated steel grille (77% transparent)
Flying Points 1 steel anchor point for flying track on top (9 positions)
2 steel anchor plates for flying track on bottom (3 positions)
Stand fittings Built in Stand Fitting, 35mm (1 3/8“)
SYSTEM SPECIFICATIONS PS15BASS with PS15 TDController MkII
Frequency Response [a] 40 Hz - 300 Hz ±3dB
Sensitivity 1W @ 1m [b] 102 dB SPL Nominal . 99 dB SPL Wideband
Nominal Peak SPL @ 1m [b] 131 to 134 dB Peak (for 550 to 1200 W RMS Amp.)
Cutoff Frequency 120 Hz Passive - 6 dB per octave - Reactance compensation
Nominal Impedance 8 Ohms.
Recommended Amplifiers 550 to 1200 Watts into 8 Ohms for 1 x PS15Bass per channel; 1000 to 1800 Watts
into 4 Ohms for 1 x PS15 Bass + 1 x PS15 or 2 x PS15 Bass per channel
SYSTEM OPERATION
Electronic Controller The PS15 Bass must be used with a Nexo Controller (PS15 TD MkII analogue or NX241 digital). Use
without a properly connected Controller will result in poor sound quality and may damage the components.
Coupling with the PS15: The PS15 Loudspeaker is not high-pass filtered when used with the PS15 Bass, which has a low order,
minimum phase shift 120 Hz passive crossover and reactance compensation. Although it is always
preferable to closely couple units, the relative positioning of the PS15 and PS15 Bass is less critical
than with sharply filtered Subbass units..
Speaker Cables The PS15 Bass is connected directly in parallel with PS15s. Single identical cables can thus be used
to loop through combinations of Passive or Active PS15 & PS15 Bass in no particular order. |
Ειδική έκδοση του AM 7115 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
υλικών προστασίας. Πιστοποίηση IP56 κατά
πρότυπο IEC 529. Παράδοση κατόπιν
παραγγελίας.
Frequency Range (-10 dB): 40 Hz – 4.2 kHz
Frequency Response (±3 dB): 47 Hz - 3.0 kHz
Transducer Power Rating (AES): 1000 W (4000 W peak), 2 hrs
Long-Term System Power Rating (IEC): 600 W (2400 W peak), 100 hrs
Maximum SPL: 50 Hz –125 Hz
125 Hz – 800 Hz: 126 dB-SPL cont avg
(dB-SPL, 1W @ 1m): 50 Hz – 125 Hz
125 Hz – 800 Hz: 97 dB
Nominal Impedance: 8 ohms
Low Frequency Driver: 1 x JBL 2265H 380 mm (15 in) Differential Drive driver with 75 mm (3 in) dual voice coil
Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment: 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish: Black DuraFlex™ finish.
Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529
Dimensions (H x W x D in vertical cabinet orientation): 548 x 561 x 657 mm
Net Weight: 25.9 kg (57 lb)
Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.
|
Παθητικό subwoofer με 15” woofer, ισχύος 400W RMS / 800W peak στα 8Ω. Ευαισθησία 96dB, max spl 124db, τεχνολογία bass reflex. Διαθέτει φωλιά στο πάνω μέρος για την τοποθέτηση σωλήνα στήριξης δορυφόρου, frequency response: 40Hz-300Hz, βάρος: 35Kg.
Χαρακτηριστικά:
- Μικρό σε όγκο για τα δεδομένα του (15” speaker) sub-woofer κατάλληλο για χρήση σε μόνιμες εγκαταστάσεις όπως café, club, discotheque, pub καθώς και φορητή χρήση
- Ιδανικό ηχείο subwoofer για φορητές εγκαταστάσεις, djs και εταιρίες ενοικιάσεων
- Δυνατότητα αναβάθμισης σε αυτοενισχυόμενο subwoofer εύκολα και απλά, προσθέτοντας την ενισχυτική βαθμίδα AVM-2 (δεν περιλαμβάνεται)
- Για την σωστή χρήση του subwoofer απαιτείται τελικός ενισχυτής ο οποίος να έχει ισχύ εξόδου 450W RMS στα 8Ω
- Τέλειος συνδυασμός του subwoofer VIBE15-SUB Mk2 με τα ηχεία VIBE10 Mk2 or VIBE12 Mk2 για δορυφόρους
- Ειδική βαφή με μπογιά πολυουρεθάνης για αντοχή στις γρατζουνιές
- Μεταλλική σήτα με επίστρωση ειδικού ακουστικού αφρού για ένα όμορφο οπτικά ηχείο και την προστασία των υλικών του speaker από σκόνες, χτυπήματα, υγρασία, σταγόνες νερού
- 35mm εσωτερική φωλιά στο πάνω μέρος για την τοποθέτηση του σωλήνα στήριξης του δορυφόρου
- High Power 15inch Woofer με ALU basket
- Ειδικές υποδοχές στο πίσω μέρος του sub woofer για την τοποθέτηση ροδών μεταφοράς (δεν περιλαμβάνονται)
- Ισχύς: 400Wrms (800Wpeak)
- Input impedance: 8Ω
- Input Sensitivity: 96dB 1W/1m
- Max. SPL: 124dB
- Frequency response: 40 - 300Hz
- Διαστάσεις: 440 x 595 x 605 mm
- Βάρος: 35kg
|
The Sub 1.15 is the ideal bass extension for the Corus C 12.2 or C 15.2 full-range cabinets.
In the low frequency range between 40 Hz and 260 Hz a Electro-Voice EVS-15S woofer in direct-radiator bass-reflex design produce an max. SPL of 125 dB.
Thanks to their low-pass filter, the Sub 1.15 can be operated simply in parallel mode to existing full-range cabinets. Also recommended, naturally, is the combination with the DSP 260 or DSP 600 and power amplifiers from the SL or LX series for the creation of active two-way systems.
Cabinet Subwoofer
Configuration Vented Direct Radiator
Components 1x 15" EVS-15S
Impedance 8 ohms
Rated Power 500 W
Peak Power 2000 W
SPL 1W/1m 93 dB
max. SPL 1m calc. 125 dB
Freq. Range 40 Hz - 260 Hz
Dimensions (WxHxD) mm 445 x 605 x 550
Net. Weight 28,5 kg
|
Yamaha realized more than 40 years ago that simply building systems around speaker units bought from other manufacturers would not do, initiating a long and arduous but fruitful quest for ideal speaker performance based on original technology. Along the way innovative Yamaha speaker technology has resulted in a number of breakthrough products that established new performance standards in a number of critical fields.
Yamaha\'s new Installation Series Speakers address a number of important issues that give them unprecedented performance and handling characteristics for live sound applications, including permanent installations. In particular, phase characteristics have been kept smooth and consistent throughout the entire series, so you can mix and match speakers to suit any system and venue without ending up with hot and dead spots due to phase interference. And of course sonic quality is superb throughout the entire reproduction range so the full impact of the source material reaches the audience undiluted.
-
High power subwoofer.
-
Dual woofers can be switched for discrete drive (IS1215 and IS1218).
-
Twelve 10mm-screw suspension points (M10) provided for flexible rigging.
-
Durable black or white finish (can be painted to match any interior).
-
Optional matching array frame available (for IS1118 and 1218 only).
-
Parallel-wired Neutrik NL4 and barrier strip connectors.
| Drive Mode |
Parallell/Discrete |
|---|
| Frequency Range (-10 dB) |
40 Hz-2.5 kHz |
|---|
| Power Rating (Parallel) |
NOISE: 1400W; PGM: 2800W; MAX: 5600W |
|---|
| Power Rating (Discrete) |
NOISE: 700W x 2; PGM: 1400W x 2; MAX: 2800W x 2 |
|---|
| Nominal Impedance |
Parallel: 4 ohms; Discrete: 2 x 8 ohms |
|---|
| Sensitivity (1 W@1 m) SPL |
Parallel: 97dB; Discrete: 100dB |
|---|
| Calculated Peak SPL |
Parallel: 134dB; Discrete: 134dB |
|---|
| Calculated Continuous SPL |
Parallel: 128dB; Discrete: 128 B |
|---|
| Components |
2x 15" woofer, 4" voice coil |
|---|
| Shape |
Rectangular |
|---|
| Material |
3/4 inch (19 mm), 13-ply Finish Birch (Baffle and Inner Wall), 5/8 inch (16 mm), 11-ply Finish Birch |
|---|
| Grill |
16 gauge powder coated perforated steel grilles, backed w/ acoustically transparent reticulated foam |
|---|
| Connectors |
1 x Neutrik NL4 and barrier strip, wired in parallel |
|---|
| Flying Hardware |
12 x M10 for shoulder eyebolts |
|---|
| Handle |
Four |
|---|
| Dimensions (H x W x D) |
34.8" (883 mm) x 17.6" (448 mm) x 24" (610 mm) |
|---|
| Weight |
139 lbs (63 kg) |
|---|
|
Ειδική έκδοση του AM 7115 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
υλικών προστασίας. Πιστοποίηση IP55 κατά
πρότυπο IEC 529. Παράδοση κατόπιν
παραγγελίας.
Frequency Range (-10 dB): 40 Hz – 4.2 kHz
Frequency Response (±3 dB): 47 Hz - 3.0 kHz
Transducer Power Rating (AES): 1000 W (4000 W peak), 2 hrs
Long-Term System Power Rating (IEC): 600 W (2400 W peak), 100 hrs
Maximum SPL: 50 Hz –125 Hz
125 Hz – 800 Hz: 126 dB-SPL cont avg
(dB-SPL, 1W @ 1m): 50 Hz – 125 Hz
125 Hz – 800 Hz: 97 dB
Nominal Impedance: 8 ohms
Low Frequency Driver: 1 x JBL 2265H 380 mm (15 in) Differential Drive driver with 75 mm (3 in) dual voice coil
Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment: 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish: Black DuraFlex™ finish.
Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529
Dimensions (H x W x D in vertical cabinet orientation): 548 x 561 x 657 mm
Net Weight: 25.9 kg (57 lb)
Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.
|
Reviews
There are no reviews yet.