Content |
The Extremo DAC can be connected via S/PDIF
or AES/EBU to any existing digital source like
CD-player, DAT, CD-transport.
A I2S digital input allows a direct link with
M192 CD-transport for the best audio performance.
CS8416 - a very low jitter 192kHz digital receiver from
Cirrus Logic.
AD1896 - an high dynamic 192/24 upsampler from
Analog
Devices 2 x PCM1792 - 140 dB, 192/24 DAC from Texas
|
Transit Pro is a super-high resolution USB/DSD (Direct Stream Digital) converter that takes audio signal from your computer and delivers the highest quality digital (optical)/analog signal to any audio component. The key to Transit Proʼs outstanding audio performance is its 32bit/384kHz digital "engine,” which delivers a super-wide bandwidth frequency response, ultra-wide dynamic range and an extremely low noise floor. There are eight user-selectable sampling rates between 44.1 and 384kHz so you can achieve the exact performance level needed for any given circumstance.
Transit Pro has a built-in high quality headphone amplifier with both ¼-inch and 1/8-inch jacks, for connecting any headphones directly without the need for an adapter. Transit Pro is USB-bus-powered or you can use an optional AC wall adapter (not included). Transit Pro is the answer when you need to deliver a reference-quality digital signal from your computer to an external audio component.
Features - Super-high resolution USB to optical/DSD converter
- Eight user-selectable sampling rates: 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384kHz
- Signal-to-noise ratio: 112dB
- Extremely low distortion: THD+N 0.003%
- Digital (optical) and analog outputs
- Direct Stream Digital rates: DSD64, DSD128
- Dual headphone outputs: ¼-inch, 1/8-inch
- Compatible with headphones from 16–600 ohms
- USB-bus-powered or optional AC adapter
Requirements - Minimum System Requirements:
- M-Audio Windows Driver
- Windows 7
- OSx 10.9
|
Digital to Analogue Converter
Thanks to a Wolfson 24-bit DAC, a 24-bit/96kHz driverless USB Audio 1.0 input and S/PDIF and TosLink digital inputs, the DacMagic 100 takes the sound from your computer, iPod, TV and other digital devices and adds detail, depth and added clarity to give you a true audio experience.
Generally the digital to analogue converter found in typical digital devices is pretty poor and won’t extract the truest quality of audio from your sources. The DacMagic 100 works by taking a direct digital audio signal from your device to bypass its soundcard or DAC. It then digitally processes the audio signal using our custom designed technology, dramatically improving sound quality and reducing distortion. This results in greater detail, sparkling clarity and a deeper scale to all of your audio.
Digital to analogue converter
Wolfson WM8742 24-bit DAC
Frequency response
20Hz to 20kHz (±0.1dB)
THD @ 1Khz 0dBFs
|
The DacMagic Plus has fantastic new features including wireless device connectivity and stunning audio performance from music of all formats. Thanks to twin DACs it instantly improves audio fidelity from all your favourite digital products allowing you to make your computer, TV, Blu-ray player and other devices a true part of your hi-fi system.
PURE PROCESS The DacMagic Plus works by taking a direct digital audio signal from your computer, TV or other device - bypassing their built-in digital to analogue converters. This signal is then carefully analysed and upgraded using our ATF2 upsampling system. Once this process is complete, the DacMagic Plus outputs your music as a much purer analogue signal straight to your amplifier. Custom developed by our dedicated team in the heart of London, DacMagic Plus is totally flexible and supports digital music of all formats. It even allows you to upgrade 24-bit music files stored on your PC for better-than-CD performance from your digital music collection. Watch the video opposite to find out why our proprietary ATF2 upsampling technology makes such a difference to the sound produced by our DACs.
Features Twin Wolfson WM8740 24-bit DACs used in dual differential configuration New Anagram Technologies ATF2, 24-bit/384kHz audio upsampling/jitter reduction technology Optional digital preamp mode allowing connection directly to power amp or active speakers 24-bit/192kHz USB Audio 2.0 with ASIO or kernel streaming modes Selectable digital filters - linear phase, minimum phase and steep Supports high quality aptX Bluetooth CODEC as well as standard SBC Bluetooth CODEC
Digital to analogue converters Dual Wolfson WM8740 24-bit DACs Digital filter Analog Devices ADSP21261 DSP; upsampling to 24-bit/384kHz Analogue filter 2-Pole Dual Differential Bessel Double Virtual Earth Balanced Frequency response 20Hz to 20kHz (±0.1dB)* THD @ 1Khz 0dBFs | The DacMagic Plus has fantastic new features including wireless device connectivity and stunning audio performance from music of all formats. Thanks to twin DACs it instantly improves audio fidelity from all your favourite digital products allowing you to make your computer, TV, Blu-ray player and other devices a true part of your hi-fi system.
PURE PROCESS
The DacMagic Plus works by taking a direct digital audio signal from your computer, TV or other device - bypassing their built-in digital to analogue converters.
This signal is then carefully analysed and upgraded using our ATF2 upsampling system. Once this process is complete, the DacMagic Plus outputs your music as a much purer analogue signal straight to your amplifier.
Custom developed by our dedicated team in the heart of London, DacMagic Plus is totally flexible and supports digital music of all formats. It even allows you to upgrade 24-bit music files stored on your PC for better-than-CD performance from your digital music collection.
Watch the video opposite to find out why our proprietary ATF2 upsampling technology makes such a difference to the sound produced by our DACs.
Features
Twin Wolfson WM8740 24-bit DACs used in dual differential configuration
New Anagram Technologies ATF2, 24-bit/384kHz audio upsampling/jitter reduction technology
Optional digital preamp mode allowing connection directly to power amp or active speakers
24-bit/192kHz USB Audio 2.0 with ASIO or kernel streaming modes
Selectable digital filters - linear phase, minimum phase and steep
Supports high quality aptX Bluetooth CODEC as well as standard SBC Bluetooth CODEC
Digital to analogue converters Dual Wolfson WM8740 24-bit DACs
Digital filter Analog Devices ADSP21261 DSP; upsampling to 24-bit/384kHz
Analogue filter 2-Pole Dual Differential Bessel Double Virtual Earth Balanced
Frequency response 20Hz to 20kHz (±0.1dB)*
THD @ 1Khz 0dBFs |
Bluetooth Receiver
- Smartphones and tablet computers offer the possibility to stream music wirelessly with Bluetooth. Bluetooth Box E is the cost-effective solution to use these possibility in your own hifi system. Not only standard SBC codecs are supported, but also audiophile aptX with almost CD-quality can be received. Pairing of mobile devices with Bluetooth Box E is done fast and playback works reliably within a distance up to 10m with direct visibility. Up to 8 different smartphones and tablets are memorized. Analogue and digital connection to amplifier or external D/A converter is provided for ultimate flexibility.
Technical specifications Pro-Ject BT Box EEffective range of wireless signal up to 10m in case of direct visibilityLine-level output: 1 x RCA/CinchOutput voltage: 2VrmsDigital outputs: 1 x optical (TOSlink®)BT version: 2.1 + EDRSupported codecs: aptX, SBC, A2DP BT profileFrequency: 2402 ~ 2480 MHzSensitivity: - 84dBmMaximum TX power +4dBmOutboard power supply: 9V/300mA DCPower consumption: 100mA/9V DC,<1W in standbyDimensions W x H x D (D with sockets): 120 x 32 x 100 mmWeight: 250g without power supply
|
Reviews
There are no reviews yet.