| Content |
BLACK
Bandwidth 5Hz to 90kHz, -3dB Maximum output
voltage 8.5Vrms (47 kOhm load)
Overall gain 40dB-60dB @ 1kHz selectable with
dip- switch.
Input Impedance 29 Ohm - 100 kOhm selectable
with dip-switch.Selectable input Capacitance.
Input Unbalanced 1 pair x channel (RCA)WBT
Output Unbalanced(RCA)WBT - MM,
high output
MC, low output MC.
Handmade Litz cable for this specific application
from White Gold. JFET differential built around Toshiba 2SK170 among the most noiseless transistor of the current production.
|
WITH INTEGRATED ANALOGUE-TO-DIGITAL CONVERTER
Both Microsoft® Windows® and Apple® Mac OS® come with very simple audio recording software pre-installed. However, to take full advantage of the high-resolution recording facilities offered by the MM 008 ADC, we recommend recording software that can record at 24 bits/96 kHz and save lossless high-resolution audio files such as FLAC or Apple® Lossless.
ADC SOFTWARE
Thorens turntables can be considered state-of-the-art in hi-fi technology as they would extract even the most minute details from your precious vinyl records. The signals generated by the pickup cartridges are however very small and therefore must be amplified to a much higher level. Regrettably, most of today’s amplifiers are no longer equipped with a dedicated phono stage. This unfortunate situation was a good reason for Thorens to develop the TEP 302, a complete phono preamplifier including RIAA equalization, which was to complement the outstanding playback performance of our turntables.
The TEP 302 is a pure-bred Class-A amplifier which employs selected, very special low-noise operational amplifiers throughout. The circuitry has been optimized "by ear” after several extended listening sessions. Of course, the TEP 302 also features a 15-Hz subsonic filter in order to protect the woofers from dangerous excursions when a warped record is played. More details, more dynamics.
- Mode: MM/MC (switchable)
- Gain at 1 kHz: 40 dB (MM)/60 dB (MC)
- Input impedance (MM): 47 kΩ + 220 pF fixed
- Input impedance (MC): 47 kΩ + 1 nF (modifiable with external load plugs)
- Frequency response (flat): 20 Hz - 20 kHz ±0.3 dB
- Frequency response (-3 dB): 10 Hz - 50 kHz
- RIAA curve accuracy: ±0.3 dB
- THD+N: 72 dB (MC)
- Crosstalk: ≧40 dB
- Input sensitivity (MM): 3.29 mVrms for -10 dBV output (316 mVrms)
- Input sensitivity (MC): 0.325 mVrms for -10 dBV output (316 mVrms)
- Max. output voltage: 482 mVrms at 5 mVrms input (1 kHz)
- Output impedance: 47 Ω
- Input connections: 3 pairs of RCA sockets (left/right)
- Output connections: 1 pair of RCA sockets (left/right)
- Power supply: 24 V DC
- Power consumption: 3.5 W/15 mA
- Weight: 511 g (not including power supply)
- Dimensions (W x H x D): 150 x 50 x 117 mm
- A/D converter: Tenor TE7022L 24Bit Delta Sigma
- Sampling rates: 8,16, 32, 44.1, 48, 96 kHz
- USB output: USB 2.0, fully backward-compatible with USB 1.1
- Operating systems: Windows® 8, Windows® 7, Vista, XP, Mac OS®
|
Backed by the combined technological prowess of multiple HARMAN brands, the JBL Commercial Series Mixers (CSM) deliver unsurpassed quality in commercial sound. Easily configured for a range of applications, such as background music, security, and paging, CSM units are designed for everything from schools and hospitals to restaurants and fitness facilities. They feature RJ45 connectors for use with JBLCSR-V in-wall volume controls, and a universal power supply that accepts AC voltages from 100 to 240 VAC, 50/60 Hz. Plus, theyʼre built using HARMANʼs GreenEdge clean standards to offer numerous energy-efficient benefits, including a lighter weight, space-saving design, and conforming to RoHS standards. 4 or 8 inputs with 1 or 2 channel outputs Fanless, space-saving 1U design Independent base/treble controls Euro-block type mic/line input and output connectors, and unbalanced RCA inputs for consumer connection Sleek industrial look with illuminated rings making them easy to see and use Configurable output routing (2 channel models only) Supports JBL CSR-V wall controller via Ethernet cable Priority muting, VOX ducking, and phantom power for all models |
SILVER
Bandwidth 5Hz to 90kHz, -3dB Maximum output
voltage 8.5Vrms (47 kOhm load)
Overall gain 40dB-60dB @ 1kHz selectable with
dip- switch.
Input Impedance 29 Ohm - 100 kOhm selectable
with dip-switch.Selectable input Capacitance.
Input Unbalanced 1 pair x channel (RCA)WBT
Output Unbalanced(RCA)WBT - MM,
high output
MC, low output MC.
Handmade Litz cable for this specific application
from White Gold. JFET differential built around Toshiba 2SK170 among the most noiseless transistor of the current production.
|
High rigidity metal frame
• Shielded power supply
• Separated toroidals for analogue and digital
• Rubber insulated aluminium feet
• WBT and Neutrik connectors
• Fully discrete analogue design
• Motorized ALPS blue series volume
control
• Buffer and Gain cards on socket for future
upgrades
• Metal machined remote control
• Trigger signal for link to Monoblock amplifier
| Phono preamplifier with A/D converter and USB output
Record Box E: Pure vinyl listening pleasure plus recording functionality!
Record Box E is an high-quality phono preamplifier, that offers the possibility to convert your valuable vinyls into computer music data. Record Box E accepts both MM & MC cartridges and gives audiophile music experience at an entry level price. The integrated A/D converter operates with Windows and MAC operating systems and connects via USB to your computer. Therefore your valuable vinyl collection can be digitised, especially for use in portable music players. Advanced circuitry and SMD construction keep noise and distortion at a surprisingly low level. A built-in internal shielding and an outboard DC power supply leave no risk for external interference. Because of its small casing, Record Box E can be placed near the turntable. Input and output sockets are gold-plated for preservation of quality. Record Box E can be connected easily to a line-input (AUX etc) of your amplifier.
- Amplification and RIAA equalisation for MM & MC
- Design principle inspired by Dr. Sykora
- Digitalisation of vinyl for recording direct to USB with suitable recording programs
- Automatic recognition, no additional drivers needed
- Runs on Windows®, Mac OS® & Linux operating systems
- SMD circuitry with special low noise components
- Internal metal shielding
- Small size allows installation close to record player
- Gold plated RCA connection sockets
- Outboard power supply included
- Black or White casing
| Input capacitance/input impedance |
MC: 100 ohms/120 pF (low output MC) MM: 47kohms/120 pF (MM or high output MC) |
| Gain, MM / MC |
40 dB / 60 dB |
| Output voltage typically |
300 mV/1 kHz bei 3 mV/1 kHz (MM) oder 0.3 mV/1 kHz (MC) |
| Max. output |
9,5 V (1 kHz) |
| Noise floor MM / MC |
94 dB (A weighted) / 75 dB (A weighted) |
| THD MM / MC |
<0,01% / <0,05% |
| RIAA-equalisation curve accuracy |
20 Hz - 20 kHz / max. 0.5 dB |
| A/D converter |
Burr Brown PCM2904 16-Bit Delta Sigma |
| Sampling rates |
32, 44,1 and 48 kHz |
| USB output |
5 pin Mini b Buchse |
| USB signal |
digital serial data protocol USB 1.1 |
| Operating systems |
Windows XP®, Windows Vista®, Windows 7®, Windows 8®, Mac OS, Linux |
| Input / Line output |
1 pair RCA/Cinch sockets each |
| Outboard power supply |
18 V / 500 mA DC, suitable for your country's mains supply |
| Power consumption |
100 mA DC |
| Dimensions W x H x D (D with sockets) |
120 x 32 x 100 (115) mm |
| Weight |
250g without power supply |
|
Reviews
There are no reviews yet.