Content | The self-powered KD12 is an uncompromising monitor and fullrange speaker - all-in-one. The KD12 delivers advanced sonic clarity and top performance. Whether as stage monitor, fullrange speaker, frontfill for larger stages or as delay speaker: The KD12 is the ideal allround solution for the up-market user.
Features
► High-class performance in ultra-lightweight design (14 kg only)
► 1.000 W Class D bi-amped power module
► Extensive DSP featuring with delay function (up to 100 m)
► IDSE© intelligent digital sound editor (on-board optimization)
► Single-encoder EASY CONTROL DSP interface
► DBL© dual-band limiters for independently stable performance
► User presets (5 user preset memories)
► Graphic backlit screen (with locking function)
► Two combo inputs (XLR/6.3 jack with MIC/LINE switches)
► Two high-resolution microphone pre-amplifiers (in MIC mode)
► Rugged, texture-painted plywood enclosure
► Sophisticated 12" coaxial transducer
► 90° x 90° beam angle (for advanced sound distribution) |
The DVX DM15 is a low-profi le stage monitor. Unobtrusive yet very muscular, it is designed for sound reinforcement applications that require powerful low-end performance without added subwoofers. It sports a high-performance 15" neodymium woofer and a 1.4" neodymium compression driver, coupled to an aluminum" CD horn. This combinationʼs response across the human voiceʼs full range is impressively assertive.
Paired with high-output digipro digital power amps in a bi-amped confi guration,
theDVX DM15belies its unobtrusive look with performance that is far from understated, delivering plenty of power to cover midsized to large stages.
| LD Systems Stinger MON81AG2
The LD Stinger MON81AG2 is an especially compact active monitor with broad frequency response and a maximum sound-level pressure of 116dB for versatile use on stage.
The 8" coaxial speaker with an integral 1" HF driver attains a dispersion angle of 75°x75°, which is beneficial in multifaceted applications as a stage monitor. The coaxial configuration results in a very homogenous sound in the entire dispersion area plus very low susceptibility to feedback. The active monitor is driven by a Class AB power amplifier with an output power of 80W RMS; short-circuit protection and a limiter ensure dependable operation.
The signal is connected and looped through using an XLR/ jack combo socket and the XLR output. The rear connector panel is rounded out by a volume control, LED indicators, and the IEC power socket
The elegant bass-reflex housing made of 15mm multiplex is finished with a durable coating and has ergonomically milled handles and a metal grille to protect the speaker. The monitor angle is 35°.
Type: active
Woofer size: 8“
Woofer size: 203 mm
Woofer type: coaxial speaker
Woofer magnet: ferrite
Woofer brand: custom made
Woofer voice coil: 2
Woofer voice coil: 50.8 mm
HF driver size: 1“
HF driver size: 25.4 mm
HF driver magnet: ferrite
HF driver brand: custom made
HF driver voice coil: 1“
HF driver voice coil: 25.4 mm
Amplifier: Class A / B
Dispersion angle (H x V): 75° x 75°
Power output (RMS): 80 W
Power output (peak): 160 W
Frequency response: 90 Hz - 20 kHz
Crossover frequency: 2.400 Hz
SPL (1 W/1 m): 97 dB
Max. SPL (continuous): 111 dB
Max. SPL (peak): 116 dB
Protection: limiter, short-circuit
Controls: Volume, On / Off
Indicators: Power, Limit
Number of line inputs: 1
Line input connectors: XLR/ 6.3 mm jack (combo)
Number of line outputs: 1
Line output connectors: XLR
Power supply: transformer
Operating voltage: 230 V AC / 50-60 Hz
Cabinet material: 15 mm plywood
Cabinet type: bass reflex
Monitor angle: 35°
Width: 320 mm
Depth: 250 mm
Height: 361 mm
Features: Ergonomic insert handles |
The SW10 STUDIO subwoofer has been designed specifically for optimum matching with the MSP series powered monitor speakers. Combined with MSP7 STUDIO or MSP5 STUDIO speakers in a stereo of surround system it can provide a seamlessly extended low end for accurate ultra wide range monitoring. A comprehensive selection of inputs and outputs as well as a phase switch and continuous high-cut and level controls make it easy to achieve optimum performance in any room and system. Whether you're simply mixing basic stereo programs or authoring DVD audio in full surround, MSP STUDIO series speakers plus an SW10 STUDIO will give you the ultimate monitoring experience.
GENERAL Type Powered Subwoofer
Crossover Frequency -
Overall Frequency Response 25Hz - 150Hz (-10dB)
Maximum Output Level 111dB, 1 m on Axis
Dimensions (W x H x D) 328 x 459 x 476 mm
Weight 26.5 kg
Magnetic Shielding Yes (Non-covered type)
SPEAKER SECTION Components LF 10" cone
HF -
Enclosure Type Bass-Reflex
Material MDF
AMPLIFIER SECTION Output Power * LF 180W
f = 100Hz, THD = 1%, RL = 8O
HF -
S/N, IHF-A filter > 100dB, LEVEL = Max
Input Sensitivity XLR-3-31 +4 dBu, LEVEL = Center
-6 dBu, LEVEL = Max
PHONE -
Input Connectors, Impedance XLR-3-31 (balanced), 10 kO
Output Connectors XLR-3-32 x 3 (balanced),
parallel connection with Input
Controls LEVEL control Center Click VR
(Min = -8 Attenuation)
LOW CUT switch -
HIGH TRIM -
LOW TRIM -
POWER SWITCH on/off
PHASE SWITCH Normal/Reverse
LPF control 40-120 Hz, 80 Hz at Center Click
Indicators LED Green: Power On
Red: Clipping
Power Consumption 160W
* These specifications apply to rated power supplies of 100, 120, 230 and 240 V.
* Specifications and appearance subject to change without notice.
|
LD Systems Stinger MON121AG2 The LD Stinger MON121AG2 is a compact active stage monitor for all mobile applications. The specially developed 12" coaxial speaker with an integral 1" HF driver and powerful ferrite magnets stands out because of a precisely symmetrical dispersion over 75° x 75° and attains a maximum sound-level pressure of 124dB with maximum resistance to feedback. It is driven by a Class AB power amplifier with a power output of 250W RMS. The frequency response curve is 80Hz - 20kHz. Dependable operation of the LD MON121AG2 is ensured by a limiter that prevents overloading of the speaker and a protection circuit that guards against short-circuiting. The input is a XLR-jack combo socket, an XLR output permits looping through of the signal. Other connector panel features include a volume control, IEC power socket, LED indicators of various colours for power, signal, and the limiter function. The elegant looking bass-reflex enclosure of the LD MON121AG2 is made of 15mm-thick multiplex finished with a durable coating. A sturdy metal grille guards against speaker damage, and ergonomically milled handles make transport easier. The monitor angle is 35°. - Type: active
- Woofer size: 12“
- Woofer size: 304 mm
- Woofer type: coaxial speaker
- Woofer magnet: ferrite
- Woofer brand: custom made
- Woofer voice coil: 2
- Woofer voice coil: 50.8 mm
- HF driver size: 1“
- HF driver size: 25.4 mm
- HF driver magnet: ferrite
- HF driver brand: custom made
- HF driver voice coil: 1“
- HF driver voice coil: 25.4 mm
- Amplifier: Class A / B
- Dispersion angle (H x V): 75° x 75°
- Power output (RMS): 250 W
- Power output (peak): 500 W
- Frequency response: 80 Hz - 20 kHz
- Crossover frequency: 2200 Hz
- SPL (1 W/1 m): 100 dB
- Max. SPL (continuous): 116 dB
- Max. SPL (peak): 124 dB
- Protection: limiter, short-circuit
- Controls: Volume, On / Off
- Indicators: Power, Signal, Limit
- Number of line inputs: 1
- Line input connectors: XLR/ 6.3 mm jack (combo)
- Number of line outputs: 1
- Line output connectors: XLR
- Power supply: transformer
- Operating voltage: 230 V AC / 50-60 Hz
- Cabinet material: 15 mm plywood
- Cabinet type: bass reflex
- Monitor angle: 35°
- Width: 440 mm
- Depth: 360 mm
- Height: 514 mm
- Features: Ergonomic insert handles
|
The NX M15-A is a high-efficiency, high output, two-way, wide dispersion active sound reinforcement system.
It benefits from the integration of 750 Watt Digipro digital amplifier power, control electronics and premium transducers components such as the 15” neodymium woofer with 3.5” high power voice coil.
The NX M15-A is the perfect balance between size and performance and it is smaller and lighter without compromising on performance.
Features |
---|
750 Watt Digipro digital amplifier | 131 dB max spl | 90 x 40, Wide dispersion constant directivity angle, rotatable horn | 15" woofer, high power neodymium 3.5" voice coil | 1" HF driver, titanium dome, neodymium 1.75" voice coil | PFC power factor correction |
Acoustical Specifications |
---|
Frequency Response -3 dB: | 50 Hz | ÷ 20 kHz | Max SPL: | 132 dB | | Horizontal coverage angle: | 90° | | Vertical coverage angle: | 40° | | Compression Driver: | 1" neo, 1.75" v.c. | | Woofer: | 15" neo, 3.5" v.c. | |
INPUT/OUTPUT SECTION |
---|
Input signal: | bal / unbal | | Input connectors: | Combo xlr-jack | | Output connectors: | xlr | | Input sensitivity: | -2 dBu / +4 dBu | |
PROCESSOR SECTION |
---|
Crossover frequencies: | 1700 Hz | | Protections: | Thermal, rms | | Limiter: | Soft peak limiter | | Controls: | Volume, side / floor, contour | |
AMPLIFIER SPECIFICATIONS |
---|
Total power: | 750 Watts | | High frequencies: | 250 Watts | | Low frequencies: | 500 Watts | | Cooling: | Convection / forced | | Connections: | Powercon in / out | |
CABINET |
---|
Cabinet Material: | Balitc birch | | Hardware: | 6 x fly tracks | | Handles: | 2 side | | Pole Mount/Cap: | Yes | | Colour: | Black | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 736 / 28.97 mm/inch | | Width: | 430 / 16.92 mm/inch | | Depth: | 395 / 15.55 mm/inch | | Net Weight: | 23.8 / 52.46 Kg/Lbs |
|
Reviews
There are no reviews yet.