NOVATION BASS STATION II SYNTHESISER 25 KEYS

459.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: BASS STATION II Category:
Bass Station II is an analogue mono-synth based on the classic original Bass Station but re-worked for the 21st century. It has two filters, two oscillators plus a third sub-oscillator, patch save and a fully analogue effects section. Add a step sequencer, arpeggiator, full sized keys and a powerful modulation section and you have the […]

 

Read more

Bass Station II is an analogue mono-synth based on the classic original Bass Station but re-worked for the 21st century. It has two filters, two oscillators plus a third sub-oscillator, patch save and a fully analogue effects section. Add a step sequencer, arpeggiator, full sized keys and a powerful modulation section and you have the makings of a synth that is built for bass, but capable of so much more.

Specifications Synth engine Oscillators

  • Osc 1
  • Osc 2
  • Sub Osc (3)
  • Noise generator

Osc 1 & 2

Select between waveforms:

  • sine
  • triangle
  • sawtooth
  • square/variable pulse width

Features

  • Sync 1 & 2
  • Detune 
  • Octave range
  • Pitch bend
  • Pitch modulation from Mod Envelope and/or LFO 1
  • Pulse width modulation from Mod Envelope and/or LFO 2

Sub Osc (3) which is tracked to Osc 1

Select independently between waveforms:

  • Sine
  • Square
  • Narrow pulse

Features

  • All modulation and tuning tracked to Osc 1
  • Independent octave select 

Mixer 

  • Osc 1 level
  • Osc 2 level
  • Sub Osc level
  • Noise generator level
  • Ring modulation depth
  • External signal level

Filter

Two filter types

  • Acid type (diode ladder filter design)
  • Classic type (derived from original Bass Station)

Features

  • Cutoff
  • Resonance
  • Overdrive
  • Filter frequency to Mod Envelope depth
  • Filter frequency to LFO 2 depth

Select ‘Classic’ filter between:

  • Low pass
  • Band pass
  • High pass
  • 12dB slope
  • 24dB slope

Envelopes

Two ADSR Envelopes  (Attack/Decay/Sustain/Release)

  • Amp Envelope
  • Mod Envelope
  • Combined control of both Envelopes

Select triggering mode between:

  • Single trigger (holds envelope state when new note is played)
  • Multi trigger (re-triggers with every new note played)
  • Autoglide (engages portamento) 

There is also a VCA limiter

LFO

Two LFOs each selectable between:

  • Triangle
  • Sawtooth
  • Square
  • Sample and hold
  • Both LFOs independently adjustable between rate and delay time
  • Key sync LFO 1 & 2
  • LFO slew on LFO 1& 2 (low pass filter on the LFO waveform)

 Effects   

  • Distortion send
  • Oscillator filter mod amount (FM effect created by Oscillator 2 modulating filter freq)
     

Step Sequencer/Arpeggiator

Arpeggiator

  • Up to 32 different patterns
  • Select between 1-4 octave range
  • Swing function
  • Select direction:
  • up
  • down
  • up / down 1
  • up / down 2
  • As played
  • Random
  • Latch (hold the arpeggiator)
  • Step Sequencer

    • Up to four sequences
    • Assign one of 32 preset rhythms or create your own
    • insert rests or legato (slide)
    • Sequencer re-trigger function

    Portamento

    • Adjust glide time
    • Single trigger or re-trigger modes
    • Integrate into step sequencer and arpeggiator

    Hardware & controller assignment

    • 25 note synth-action keyboard
    • Aftertouch can be assigned to modulate:
    • Filter frequency
    • LFO 1to Osc pitch
    • Osc 2 speed
  • Pitch wheel
  • Modulation wheel can be assigned to:
    • LFO 2 to filter frequency
    • LFO 1 to Osc pitch
    • Osc 2 pitch
  • Octave up/ down buttons
  • 64 factory presets
  • 64 slots for user patches (and patch dump facility for storing more)
  • Master volume dial
  • Inputs and Outputs

    • USB MIDI (for connecting & powering Bass Station II via host computer)
    • Mono output on 1/4″ TRS jack
    • Headphone output on 1/4″ TRS jack
    • External input on 1/4″ TRS jack
    • Sustain pedal input on 1/4″ TS jack
    • MIDI IN / MIDI OUT ports on 5 pin din
    • DC power input
    • Switch between power off / DC powered / bus powered

    Dimensions

    • 18″ wide x 10.75″ deep x 3″ tall

     

    Weight 3.00 kg

    Reviews

    There are no reviews yet.

    Be the first to review “NOVATION BASS STATION II SYNTHESISER 25 KEYS”

    Your email address will not be published. Required fields are marked *

    Quick Comparison

    NOVATION BASS STATION II SYNTHESISER 25 KEYS removeYAMAHA MOTIF-XF8 Special White Edition removeArturia MICRO BRUTE ANALOG SYNTHESIZER removeYAMAHA Reface CS Synthesizer removeKORG Volca Keys Analogue Loop-Synthesizer removeWALDORF Blofeld Desktop Synthesizer Module remove
    NameNOVATION BASS STATION II SYNTHESISER 25 KEYS removeYAMAHA MOTIF-XF8 Special White Edition removeArturia MICRO BRUTE ANALOG SYNTHESIZER removeYAMAHA Reface CS Synthesizer removeKORG Volca Keys Analogue Loop-Synthesizer removeWALDORF Blofeld Desktop Synthesizer Module remove
    Image
    SKUBASS STATION III000.00058AR/EM/000053I000.00061VOLCA-KEYSBlofeld
    Rating
    Price 459.00 incl. GR VAT 4,200.00 incl. GR VAT 302.00 incl. GR VAT 392.00 incl. GR VAT 167.50 incl. GR VAT599.00 incl. GR VAT
    Stock

    In stock

    Available on backorder

    Available on backorder

    In stock

    In stock

    Available on backorder

    AvailabilityIn stockAvailable on backorderAvailable on backorderIn stockIn stockAvailable on backorder
    Add to cart

    Add to cart

    Add to cart

    Add to cart

    Add to cart

    Add to cart

    Add to cart

    Description
    Content

    Bass Station II is an analogue mono-synth based on the classic original Bass Station but re-worked for the 21st century. It has two filters, two oscillators plus a third sub-oscillator, patch save and a fully analogue effects section. Add a step sequencer, arpeggiator, full sized keys and a powerful modulation section and you have the makings of a synth that is built for bass, but capable of so much more.

    Specifications Synth engine Oscillators
    • Osc 1
    • Osc 2
    • Sub Osc (3)
    • Noise generator

    Osc 1 & 2

    Select between waveforms:

    • sine
    • triangle
    • sawtooth
    • square/variable pulse width

    Features

    • Sync 1 & 2
    • Detune 
    • Octave range
    • Pitch bend
    • Pitch modulation from Mod Envelope and/or LFO 1
    • Pulse width modulation from Mod Envelope and/or LFO 2

    Sub Osc (3) which is tracked to Osc 1

    Select independently between waveforms:

    • Sine
    • Square
    • Narrow pulse

    Features

    • All modulation and tuning tracked to Osc 1
    • Independent octave select 
    Mixer 
    • Osc 1 level
    • Osc 2 level
    • Sub Osc level
    • Noise generator level
    • Ring modulation depth
    • External signal level
    Filter

    Two filter types

    • Acid type (diode ladder filter design)
    • Classic type (derived from original Bass Station)

    Features

    • Cutoff
    • Resonance
    • Overdrive
    • Filter frequency to Mod Envelope depth
    • Filter frequency to LFO 2 depth

    Select 'Classic' filter between:

    • Low pass
    • Band pass
    • High pass
    • 12dB slope
    • 24dB slope
    Envelopes

    Two ADSR Envelopes  (Attack/Decay/Sustain/Release)

    • Amp Envelope
    • Mod Envelope
    • Combined control of both Envelopes

    Select triggering mode between:

    • Single trigger (holds envelope state when new note is played)
    • Multi trigger (re-triggers with every new note played)
    • Autoglide (engages portamento) 

    There is also a VCA limiter

    LFO

    Two LFOs each selectable between:

    • Triangle
    • Sawtooth
    • Square
    • Sample and hold
    • Both LFOs independently adjustable between rate and delay time
    • Key sync LFO 1 & 2
    • LFO slew on LFO 1& 2 (low pass filter on the LFO waveform)
     Effects   
    • Distortion send
    • Oscillator filter mod amount (FM effect created by Oscillator 2 modulating filter freq)
       
    Step Sequencer/Arpeggiator

    Arpeggiator

    • Up to 32 different patterns
    • Select between 1-4 octave range
    • Swing function
    • Select direction:
      • up
      • down
      • up / down 1
      • up / down 2
      • As played
      • Random
    • Latch (hold the arpeggiator)

    Step Sequencer

    • Up to four sequences
    • Assign one of 32 preset rhythms or create your own
    • insert rests or legato (slide)
    • Sequencer re-trigger function
    Portamento
    • Adjust glide time
    • Single trigger or re-trigger modes
    • Integrate into step sequencer and arpeggiator
    Hardware & controller assignment
    • 25 note synth-action keyboard
    • Aftertouch can be assigned to modulate:
      • Filter frequency
      • LFO 1to Osc pitch
      • Osc 2 speed
    • Pitch wheel
    • Modulation wheel can be assigned to:
      • LFO 2 to filter frequency
      • LFO 1 to Osc pitch
      • Osc 2 pitch
    • Octave up/ down buttons
    • 64 factory presets
    • 64 slots for user patches (and patch dump facility for storing more)
    • Master volume dial
    Inputs and Outputs
    • USB MIDI (for connecting & powering Bass Station II via host computer)
    • Mono output on 1/4" TRS jack
    • Headphone output on 1/4" TRS jack
    • External input on 1/4" TRS jack
    • Sustain pedal input on 1/4" TS jack
    • MIDI IN / MIDI OUT ports on 5 pin din
    • DC power input
    • Switch between power off / DC powered / bus powered
    Dimensions
    • 18" wide x 10.75" deep x 3" tall

     



    The first Yamaha synthesizer was released in 1974, at a time when synthesizers were only just beginning to be accepted into the musical mainstream. Yamaha has been at the forefront ever since, with instruments that have defined musical styles and propelled countless artists to stardom. 40 years on, Yamaha synthesizers and music workstations are still the instruments of choice for acclaimed professionals and discerning amateurs worldwide. 40 years is a milestone worth commemorating. To mark this auspicious occasion and reaffirm our commitment to empowering artists everywhere with the finest tools available, we have created the limited edition 40th Anniversary MOTIF XF Music Production Synthesizer. The commemorative MOTIF XF is pure white, symbolizing both our dedication for the past 40 years and a new beginning from which an even brighter future for musical creativity and expression will arise.
    Celebrate with us, and the pure-white 40th Anniversary MOTIF XF.

    MicroBrute is pure analog sonic powerhouse of a synth. Small in size but loaded with features, it follows in the footsteps laid by its big brother the MiniBrute.

    Packed with mixable waveforms, a new sub oscillator design, the famous Steiner-Parker multimode filter, super fast envelope, syncable LFO and the new step sequencer, not to mention the patchable mod matrix the MicroBrute is a landmark new synth at an incredible price.

    MAIN FEATURES:

    • Monophonic synthesizer
    • 100% Analog Audio Signal Path
    • Steiner-Parker Multimode Filter (LP, BP, HP)
    • Voltage Controlled Oscillator with new Overtone Sub-Osc
    • Oscillator Mixer (Sub, Sawtooth, Square, Triangle)
    • LFO with 3 waveforms and destination attenuator
    • Brute FactorTM delivering saturation and rich harmonics
    • Ultrasaw generating shimmering sawtooth waveforms
    • Metalizer bringing extreme triangle harmonics
    • Fast Envelope Generator
    • 25 note mini Keyboard
    • External Analog Audio Input (level pot on rear)
    • CV Inputs: Pitch, Filter, Sub-mod, Pulse, Saw animator, metalizer, gate in.
    • CV outputs: Pitch, Gate, Env, LFO
    • MIDI Inwith 5-Pin DIN connector
    • USB MIDI In/Out
    • 1/4" Audio Output and 1/8" Headphone Output
    • Free Editor Software
    • Step Sequencer :
      • 8 sequences stored on power down
      • Rate control
      • Sync to MIDI clock
      • Multiple modes (via software editor)
    • Tap tempo/rest insert
    Box content
    • MicroBrute synthesizer.
    • User manual.
    • Preset sheets.
    • Power supply.
    • 2 mini jack patch cords.

    Size & weight
    • Instrument size : 325x221x60mm
    • Instrument weight : 1.750 Kg

    Analog Physical Modeling Engine with multiple synthesis and oscillator types, Each oscillator type has flexible LFO and ADSR routing plus unique Texture and Mod controls that work as follows:
    Multi-saw Texture, control adds sub-oscillator Mod, layers multiple sawtooth waves Pulse Texture, changes pitch of 2nd square wave Mod, change pulse width Oscillator Sync Texture, changes pitch and tone of OSC2 Mod, sets pitch change amount Ring Modulation Texture, changes pitch of OSC1 Mod, changes pitch of OSC2 Frequency Modulation Texture, sets Modulation amount Mod, changes pitch of the Modulator

    ?Onboard effects processor with five types add depth to your sound The effect types are: OFF (effect bypass,) Delay, VCM Phaser, VCM Chorus/Flanger and Distortion ?8-note polyphony allows complex chords and pads or switch to mono Mode for fat synth bass or solo leads

    Korg Volca Keys, the new Analogue Loop-Synthesizer from Korg!

     
    • 3-Voices polyphon.
    • 3 VCOs.
    • 1 VCF.
    • 1 VCA.
    • 1 LFO and 1 EG.
    • Voicing-Function.
    • Delay-Effect.
    • Loop Sequencer.
    • Motion Sequence-Function.
    • Active Step and Flux Function.
    • Selftuning-Function.
    • Multitouch Trigger Pad / Step-Button.
    • LED-Display.
    • Build-in Speaker.
    • Sync I/O 1/8" Mini-Input female Mono.
    • MIDI In.
    • Headphone-Out 1/8" Mini-TRS Stereo.
    • Power via 6x AA Battery or optional Power Supply (KA-350 not included).
    • Dimension: 193 X 115 X 45 mm (WxHxD).
    • Weight: 372gr.
    Waldorf is back in the game. With the Blofeld. This synthesizer offers all the unique qualities that made Waldorf a truly legendary brand. The engine inside the heavy duty, full metal chassis of the Blofeld delivers the same fat and rich sound that so many Waldorf users worldwide love when they play their Pulse, Q, Q+, Micro Q, Microwave, Microwave II/XT, or even the flagship Wave. Yes, you've heard it right. The Blofeld is not only capable of producing these warm, organic analog sounds known from the Q synthesizer line, it also sports a wavetable engine like its predecessors with "Wave" in their names. This unique synthesis system is based upon the revolutionary PPG Wave synthesizers of the early 80s. So when you listen to the Blofeld for the first time, you will instantly recognize those edgy, hard-hitting and bell-like timbres that have been an integral part of so many world hits from the PPG era on, and become increasingly popular once more. In fact it is amazing to realize that nowadays this complex technology fits into such a slim and elegant device. And for a price no-one would have imagined a couple of years ago. Oscillators Each of the three oscillators offers authentic circuit-models of analog waveforms: Pulse with variable pulse-width, sawtooth, triangle and, as found in relatively few analog synthesizers these days, sine wave. Furthermore, oscillators 1 and 2 feature the two wavetables that were introduced by the Waldorf Q and appeared shortly thereafter in the Micro Q series. Not only that, the Blofeld includes all ROM Wavetables from the mighty flagship Waldorf Wave as well as Microwave II/XT. Plus, lo and behold, the desperately requested "Upper Wavetable" from the good old PPG Wave! But, for the first time in the history of Waldorf and PPG, each of these two oscillators can have its own wavetable. What's more, you have control over the brilliance of these wavetables, which is especially important for waves with lots of harmonics in the bass end. You decide if you prefer pure and perfect harmonics or the same edgy timbre you know and love from the earlier Waldorf and PPG synthesizers. Brilliance also affects the sawtooth and pulse oscillator models. From warm and soft (for those typical L.A. string pads) to the hard shapes you need for punchy and biting bass sounds. But note, Brilliance is not a simple filter applied after the oscillators, the model itself is modified. Each of the three oscillators can be frequency-modulated by any of the other oscillators, the noise generator or one of the LFOs. With low FM amounts, you can add a little dirt to the oscillator sound, with higher amounts you get typical FM effects. On top of all that, oscillator 2 can be hard-synced to oscillator 3. Ring Modulation and Noise Generator Oscillators 1 and 2 can be ring-modulated to create bell-like or metallic sounds, eerie sound effects as well as pumping basses and leads. The noise generator delivers white noise that can be filtered low or high pass, depending on the Noise Colour setting. The three oscillators, the ring modulator and the noise generator can be freely mixed into filter 1 and filter 2. This allows fine control over the harmonic content of each of the tone generators. Filters The Blofeld has two multimode filters per voice that can be routed in series or in parallel. Each Filter has its own Pan parameter for easy creation of stereo sounds. The selection of filter types includes low pass, band pass, high pass and notch (band reject), each with 12dB/oct or 24dB/oct slope. The filter models are based on several famous Waldorf filter algorithms found in all our products. They offer resonance up to self-oscillation as well as frequency modulation (filter FM). Furthermore, the Blofeld features the same comb filter types (with positive and negative feedback) that we first introduced in the Waldorf Q. These can be used to thicken bass and pad sounds or to create percussive, string or flute sounds reminiscent of physical modelling. Overdrive, Saturation, Distortion, Shaping You name it. The Blofeld offers a freely controllable "Drive" behind each filter with more than a dozen curves. These include such standards as the drive from the Q and Micro Q, low/medium/hard saturation, tube saturation, two types of electric pickups, a rectifier, digital overflow as well as esoteric stuff such as "binary distortion“, a sinusoidal waveshaper and even a distortion controlled by oscillator 1. And because the Blofeld has two filters that can be routed in series, you can control the timbre of the drive output of Filter 1 by dampening or emphasizing certain frequencies with filter 2. Effects The Blofeld has two effect slots with various types. In Multimode, the first effect slot is available per Part, while the second one is used for all 16 Parts (i.e. global) with controllable mix levels. Part 1 determines the settings of the second effect. The first effect slot offers such modulation effects as chorus, flanger as well as a combined type called "Triple FX“. The latter gives you several effects at once, but with a reduced parameter set. The second effect slot offers all the same types as the first, but with the addition of delay, clocked delay and reverb. Envelopes Four envelopes with different types and trigger modes affect any sound parameters you choose. Each envelope can be either polyphonic or single trigger. This is especially interesting with the monophonic voice allocation, as the filter envelope can be set to be triggered only by the first note(s) while the Amp Envelope is triggered anew (i.e. on each note). Think "organ percussion register“, for instance. The Envelope types include the standard ADSR as well as an enhanced ADSR-variant (with controllable attack level and two decay and sustain stages), two different loop envelopes and a "one shot" Envelope. The Loop types can be used to act as additional LFOs, while the One Shot is perfectly suited for percussion sounds (which typically ignore the note release). LFOs Each of the three LFOs offers sine, triangle, square and sawtooth waveforms, plus sample & hold and random. LFOs can be synchronized to MIDI clock, they can be polyphonic or monophonic, reset on key trigger to a freely definable phase, and the speed can be scaled by MIDI note (key follow). There are separate delay and fade in/out parameters for e.g. delayed vibrato (positive Fade values) or a burst of vibrato at the start of each note (negative Fade values). One important feature of the Blofeld LFOs is that higher rates reach well into the audio frequency range, thus making them useful extra FM sources. There are two basic modes: either linear FM as seen in classic digital synths, or logarithmic FM, which is primarily the domain of analog modular systems. Modulation Matrix Here's where the real Waldorf power lies. Each and every instrument designed and built by Waldorf lets you connect dozens of modulation sources to all the important sound generation parameters. Individual or multiple oscillator pitches, their pulsewidths and waveforms, their levels and filter-balances, FM modulation amounts, individual filter cutoff and resonance, filter FM amounts and stereo panning, or just the good old sound output level – everything can be controlled from internal modulation sources or from a variety of MIDI messages such as velocity, keytrack, continuous controllers (including wheels, breath and foot controllers) etc. You can of course "modulate the modulators" i.e. control LFO speeds and individual envelope rates and levels. But in Blofeld you can even specify that these sources modulate themselves – recursive modulation! For instance, modulating an envelope rate by the same envelope (or another one) can alter the shape of the slope dramatically from the standard exponential curve to linear to inverse exponential. And how many slots do you get in the mod matrix? Two? Three? Four? No, we're talking big here. You get 16 freely definable slots plus all the pre-routed modulation destinations such as pitch, Osc 1, 2 and 3 frequency and PWM (pulse width modulation), filter 1 and 2 cutoff, panorama and amp level modulation. And let's not forget that the filter envelope is already routed to filter 1 and 2 cutoff, and the amp envelope is routed to the amp level. Makes a total of 33 simultaneous connections if we counted correctly. Modifiers What if you want something really really crazy, like controlling a pitch vibrato done by LFO 3 with the modulation wheel. Although there are a few such composite modulation sources such as "LFO1*MW" (LFO 1 controlled by Modulation Wheel) and "LFO2*Press" (LFO 2 controlled by monophonic Aftertouch), there's nobody doing the "LFO3*MW" thing for you. But, don't worry, that's where the Modifiers come into play. In seconds you can set up a new modifier, with the two sources set to LFO 3 and modulation wheel, and the "operation" set to "*" (multiply). You can use such custom-made modulation sources in any of the modulation slots described above. Okay, maybe you are more the regular musician who simply wants to perform a binary OR between two modulation sources? Okay, go for it! This operation is just one of several at your service. Arpeggiator Okay, Blofeld's arpeggiator could very well become the biggest chapter of this page but let's try to keep it short... It features variable clock divisions from 1/64 triplets to more than 1000 bars, with variable swing/shuffle, a range of up to 10 octaves. Up, down and alternate figures, selectable play order from low to high note, low to high velocity, as played or reversed, variable note length, different velocity modes. And Hold or One-Shot, if you like. But more importantly, it has the most powerful Pattern Editor we have ever seen. You can set each Step to either play the note it would do so anyway, to pause, to play the previous note again, play the first or the last note, play those together, play a chord consisting of all held notes or a randomly selected note. Then you can adjust the Accent of each step (including silence), activate or deactivate Glide for each step, set the timing to play a step ahead or behind its nominal time, and finely adjust the note length between short staccato and full legato. No wonder this arpeggiator had great reviews when it first appeared in the Waldorf Q. It will take you straight to arpeggiator-heaven, as has already happened to thousands of Waldorf customers. Dig it! Sound Now, how does all that sound? You probably know that Waldorf synthesizers are well loved for their sound character, and the Blofeld is certainly no exception. But who are we to tell you? Better listen to the Waldorf Blofeld demos or just believe us: it sounds great. Now go and get one! Technical InfoMost important features Unbeatable price tag Sturdy Metal Enclosure 7 endless stainless steel Dials Graphic Display 128 x 64 pixels, b/w, white background LED More than 1000 Sounds 3 Oscillators per voice Frequency Modulation between the Oscillators All Q Oscillator Models All Microwave II/XT/XTk Wavetables 2 independent Multi Mode Filters per voice Filter FM 2 Drive stages per voice with selectable Drive Curves 3 fast LFOs per voice 4 fast Envelopes per voice Powerful Arpeggiator Freely programmable Arpeggiator Pattern with up to 16 Steps per Sound General Features Up to 25 Voices 16 part multi timbral More than 1000 Sounds Sturdy Metal Enclosure 7 endless stainless steel Dials 5 Buttons Graphic Display 128 x 64 pixels, b/w, white background LED MIDI LED Volume Control Power Switch Stereo Output Headphone Output MIDI In USB Connector for MIDI In / Out: - uses standard USB MIDI Driver provided by host computer OS - Windows ME minimum, Windows XP or newer recommended - Mac OS X 10.2 minimum, Mac OS X 10.3 or newer recommended External Power Supply Per Voice 3 Oscillators Virtual Analog Models: - Pulse with Pulse Width Modulation and adjustable Brilliance - Sawtooth with adjustable Brilliance - Triangle - Sine Wavetables: - Q Alt 1 and Alt 2 Wavetable with adjustable Brilliance - All Wavetables from Microwave II/XT/XTk Series with adjustable Brilliance - Separate Wavetable selectable for Oscillator 1 and 2 Frequency Modulation between the Oscillators Oscillator Synchronization Ring Modulator for Osc 1 / 2 Noise Generator with Noise Colour 2 independent Multi Mode Filters: - Filter FM - Resonance up to Self-Oscillation - Low Pass 24 dB / 12 dB - Band Pass 24 dB / 12 dB - High Pass 24 dB / 12 dB - Notch 24 dB / 12 dB - Comb Filter with positive / negative Feedback - PPG Low Pass Filter 2 Drive stages per voice with adjustable Drive Gain and selectable Curves: - Clip - Hard - Medium - Soft - Sine Shaper - etc. Modulation Matrix with 16 Slots, freely programmable: - Modulation Speed far into Audio Range - Modulation Sources include all internal Modulation Sources plus various MIDI messages - Modulation Destinations for almost all continuous sound parameters Various pre-routed Modulation Destinations with selectable Sources: - Pitch Modulation - Oscillator 1 / 2 / 3 Frequency Modulation - Oscillator 1 / 2 / 3 Pulse Width Modulation - Filter 1 / 2 Cutoff Modulation - Filter 1 / 2 Frequency Modulation - Pan 1 / 2 Modulation - Amp Modulation 4 Modifiers for transforming Modulation Sources with various Algorithms 3 fast LFOs: - Syncable to MIDI Clock - Note Retrigger with adjustable Start Phase - Monophonic LFO - Keytrack 4 fast Envelopes with selectable types: - Single Trigger / Retrigger per Envelope - ADSR - ADS1DS2R (2 Decay/Sustain stages plus adjustable Attack Level) - One Shot - Loop S1S2 (Loop between Sustain 1 and 2) - Loop All (Loop over all stages) Poly, Mono, Dual or Unisono Mode with selectable Voice Count Per Part Powerful Arpeggiator: - Hold and One Shot modes - Syncable to MIDI Clock - Direction Up, Down, Alternate - Range up to 10 Octaves - Various methods to modify Note Sort Order Freely programmable Arpeggiator Pattern with up to 16 Steps per Sound. programmable per Step: - Accent - Timing - Length - Glide on/off - Pause - Chord - Previous note - Random not from Note List - first and/or last note from Note List 1 Effect slot per part 1 Effect slot globally for all parts Effect types: - Chorus - Flanger - Phaser - Overdrive - Triple FX (S&H, Ring Modulation, Chorus) - Delay (only available on global Effect slot) - Clocked Delay (only available on global Effect slot) - Reverb (only available on global Effect slot)
    Weight3.00 kg7.00 kg2.00 kg2.00 kg0.30 kg5.00 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 3.00 kg
    Weight 7.00 kg
    Weight 2.00 kg
    Weight 2.00 kg
    Weight 0.30 kg
    Weight 5.00 kg