NUMARK CC-1 PROFESSIONAL DJ CARTRIDGE

79.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: H99NU00007 Category:
NUMARK’S ALL–AROUND CHAMP, FOR DURABILITY AND RELIABILITY     * Frequency response: 20 to 22,000Hz     * Output: 6mV     * Channel separation nominal: 28dB     * DC resistance: 430 ohms/ch     * Inductance: 400mH/ch     * Weight: 18.0g     * Channel balance: within 1.5dB     * Tracking force: 3–6g     * Recommended load: 47K ohms […]

 

Read more

NUMARK’S ALL–AROUND CHAMP, FOR DURABILITY AND RELIABILITY

    * Frequency response: 20 to 22,000Hz
    * Output: 6mV
    * Channel separation nominal: 28dB
    * DC resistance: 430 ohms/ch
    * Inductance: 400mH/ch
    * Weight: 18.0g
    * Channel balance: within 1.5dB
    * Tracking force: 3–6g
    * Recommended load: 47K ohms 200pf
    * Stylus tip: fine circular diamond
    * Application: high versatility and skip resistance

Weight 0.18 kg

Reviews

There are no reviews yet.

Be the first to review “NUMARK CC-1 PROFESSIONAL DJ CARTRIDGE”

Your email address will not be published. Required fields are marked *

Quick Comparison

NUMARK CC-1 PROFESSIONAL DJ CARTRIDGE removeOrtofon 2M RED CARTRIDGE removeORTOFON OM Q.Bert CARTRIDGE removeORTOFON MC 3 Turbo CARTRIDGE removeORTOFON CONCORDE DIGITRACK Twin removeAUDIO TECHNICA AT-OC9ML/II Turntable cartridge remove
NameNUMARK CC-1 PROFESSIONAL DJ CARTRIDGE removeOrtofon 2M RED CARTRIDGE removeORTOFON OM Q.Bert CARTRIDGE removeORTOFON MC 3 Turbo CARTRIDGE removeORTOFON CONCORDE DIGITRACK Twin removeAUDIO TECHNICA AT-OC9ML/II Turntable cartridge remove
Image
SKUH99NU000072MREDOMQ.BertMC3TurboCONCORDE DIGITRACKTwinAT-OC9ML/II
Rating
Price 79.00 incl. GR VAT 105.40 incl. GR VAT69.00 incl. GR VAT349.00 incl. GR VAT223.00 incl. GR VAT604.87 incl. GR VAT
Stock

In stock

Only 2 left in stock (can be backordered)

In stock

In stock

In stock

In stock

AvailabilityIn stockOnly 2 left in stock (can be backordered)In stockIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

NUMARK'S ALL–AROUND CHAMP, FOR DURABILITY AND RELIABILITY

    * Frequency response: 20 to 22,000Hz
    * Output: 6mV
    * Channel separation nominal: 28dB
    * DC resistance: 430 ohms/ch
    * Inductance: 400mH/ch
    * Weight: 18.0g
    * Channel balance: within 1.5dB
    * Tracking force: 3–6g
    * Recommended load: 47K ohms 200pf
    * Stylus tip: fine circular diamond
    * Application: high versatility and skip resistance

The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series.  Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality. 2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today. The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet. Of course the 2M isnʼt just another pretty face. It has been engineered to the highest standards and is congruent with Ortofonʼs unrelenting commitment to providing the most precise and accurate reproduction possible without coloration. The 2M series of cartridges feature Ortofonʼs trademark split pole pins, an invention which enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge.  Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series.  The 2M Red uses an improved engine, which provides an increased output of 5.5mV. 2M red features a tipped elliptical diamond.
TECHNICAL DATA
Output voltage at 1000 Hz, 5cm/sec. 5,5 mV
Channel balance at 1 kHz  1,5 dB
Channel separation at 1 kHz 22 dB
Channel separation at 15 kHz 15 dB
Frequency range at - 3dB 20-22.000 Hz
Frequency response 20-20.000 Hz + 3 / - 1 dB
Tracking ability at 315Hz at recommended tracking force 70 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Tracking force range 1,6-2,0g (16-20 mN)
Tracking force, recommended 1,8 g (18 mN)
Tracking angle 20°
Internal impedance, DC resistance 1,3 kOhm
Internal inductance 700 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 150-300 pF
Cartridge colour, body/stylus Black/Red
Cartridge weight 7,2 g
Replacement stylus unit 2M Red

Co-developed by one of the most legendary DJs of all time, the Ortofon Q.Bert provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics.  The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.

 

 

Output voltage at 1000Hz, 5cm/sec.

11 mV

Channel balance at 1kHz

1,5 dB

Channel separation at 1kHz

22 dB

Channel separation at 15 kHz

-

Frequency range at -3dB

20-18.000 Hz

Frequency response

20-18.000 Hz - 3 dB

Tracking ability at 315 Hz at recommmende tracking force

90 μm

Compliance, dynamic lateral

12 μm/m N

Stylus type

Spherical

Stylus tip radius

R 18 μm

Tracking force range

3,0 g (30 mN)

Tracking force recommended

4,0 g (40 mN)

Tracking angle

20°

Internal impedance, DC resistance

1.680 Ohm

Internal inductance

920 mH

Recommended load resistance

47 kOhm

Recommended load capacitance

200-400 pF

Cartridge weight

5 g

Replacement stylus unit

Q.Bert

 

The MC 3 Turbo takes high output moving coil (MC) cartridges a step further, with a high polished, nude fine line diamond.  The MC 3 Turbo has a 3.3mV output, which is perfect for use with virtually any moving magnet (MM) phono preamps, included inbuilt models.  The nude fine line diamond resolves a high level of detail and provides expansive stereo imaging.


Technical data  
Output voltage at 1000 Hz, 5cm/sec. 3,3 mV
Channel balance at 1 kHz
Channel separation at 1 kHz > 24 dB
Channel separation at 15 kHz >15 dB
Frequency range at - 3dB 20-30.000 Hz
Frequency response FIM distortion at recommended 20-20.000 Hz + 4 / - 1 dB
Tracking ability at 315Hz at recommended tracking force *) > 70 µm
Compliance, dynamic, lateral 13 µm/mN
Stylus type Nude Fine Line
Stylus tip radius r/R 8/40 µm
Tracking force range 1,8-2,2 g (18-22 mN)
Tracking force, recommended 2 g (20 mN)
Tracking angle 20°
Internal impedance, DC resistance 100 Ohm
Recommended load impedance 47 kOhm /
Cartridge body material Noryl
Cartridge colour Black
Cartridge weight 4,1 g

Professional plug-in catrridge designed for use Serato Scrach Live and other digital interface formats using time coded vinyl. Set includes two cartridges with two styli, cleaning brush and carry case.

ORTOFON CONCORDE DIGITRACK KIT WITH 2 STYLI

Ortofon\'s Red Digitrack Cartridge is designed specifically for coded vinyl. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for coded vinyl with low wear, high output and the best mix and scratch ability.

With the introduction of the DigiTrack cartridge, Ortofon continues to break new ground. Finally, technology has become an art. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3\'s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for code vinyl. Low wear, high output and no more lugging around crates of records.

Our engineers spent hundreds of hours studying the characteristic of time coded vinyl from such products as Serato Scratch, FinalScratch, Virtual DJ, PCDJ Scratch and many others. They\'ve designed a product that will pick up all the coded information while leaving minimal wear on your record. Combine superior output and tracking ability and you\'ve got a cartridge that will perform flawlessly every time. Ideal for both mixing and scratching. The DigiTrack will keep you in the groove all night long.

TECHNICAL DATA CONCORDE DIGITRACK

Output voltage at 1000 Hz,
5cm/sec.
8 mV
Channel balance at 1 kHz
1,5 dB
Channel separation at 1 kHz
22 dB
Channel separation at 15 kHz
15 dB
Frequency range
20-20.000 Hz
Frequency response
20-18.000 Hz -3 /- 2dB
FIM distortion at recommended tracking force,
DIN 45.542
< 1%
Tracking ability at 315Hz at
recommended tracking force
80 m
Compliance, dynamic, lateral
12 m/mN
Stylus type
Spherical
Stylus tip radius
R18
Equivalent stylus tip mass
0,6 mg
Tracking force range
2-4 g (20-40 mN)
Tracking force, recommended
3,0 g (30 mN)
Tracking angle
20
Internal impedance, DC resistance
1325 Ohm
Internal inductance
765 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge colour, body/stylus
Red/Red
Cartridge weight
18,5 g
Replacement stylus unit
Digitrack

Type: Dual Moving Coil

Frequency Response: 15 to 50,000 Hz

Channel Separation: 30 dB (1 kHz)

Channel Balance: 1.0 dB (1 kHz)

Coil Impedance: 12 W (1 kHz)

DC Resistance: 12 W

Vertical Tracking Angle: 23 degrees

Recommended Load Impedance: Min 100 W

Coil Inductance: 25 mH (1 kHz)

Static Compliance: 35 x 10 – 6 cm / dyne

Dynamic Compliance: 9 x 10 – 6 cm / dyne (100 Hz)

Output Voltage: 0.4 mV (at 1 kHz, 5 cm/sec)

Stylus Shape: MicroLine™

Cantilever: Gold-plated solid boron

Stylus Construction: Nude square shank

Mount: 1/2” centers

Dimensions: 17.3 (H) x 16.8 (W) x 25.7 (L) mm

Weight: 8.0 g

Accessories: 1 non magnetic screw driver; 1 brush; 2 washers; 2 x 13.5 mm mounting screws; 2 x 18 mm mounting screws; 1 plastic protector;

Weight0.18 kg0.70 kg0.50 kg0.40 kg0.50 kg0.05 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.18 kg
Weight 0.70 kg
Weight 0.50 kg
Weight 0.40 kg
Weight 0.50 kg
Weight 0.05 kg