Content |
Designed to offer the bedroom DJ impressive sound in a compact format, the N-Wave 360 system includes two matched speaker cabinets. Each cabinet contains a 1" silk dome tweeter—with blue LED illumination—matched with a 3" woofer via a precision crossover circuit. The onboard amplification system can deliver up to 60 Watts of peak power. These magnetically shielded powered monitors are ideal for a compact setup; they wonʼt interfere with other electronics and offer extra protection when used near a video monitor.
The amplification system for both speakers is mounted in one unit, so only one speaker needs a power connection. Connect the second cabinet using the plug-in speaker cable (included.) The volume knob is conveniently located on the front panel for easy access. High-density materials are used to increase efficiency, and bass porting improves the low-end response. Concave oval waveguides provide a wide listening area "sweet-spot” for accurate imaging and fatigue-free listening. Radial-edge speaker baffles minimize audio distortion.
|
The Genelec 8130A Digital Monitoring System has a 192 kHz/24 bit digital audio interface.
Due to its compact size, integrated construction, excellent dispersion and precise stereo
imaging, the 8130A is ideal for near field monitoring, mobile vans, digital audio workstations,
broadcast and TV control rooms, surround sound systems, home studios, multimedia
applications and also for use with computer soundcards. The Directivity Control Waveguide?
(DCW?) technology provides excellent frequency balance even in difficult acoustic
environments.
The integrated design allows the amplifiers and the drivers to be calibrated as a single unit,
eliminating the effects of component tolerances and ensuring consistent quality.
The all-aluminium Minimum Diffraction Enclosure? (MDE?) and advanced Directivity Control
Waveguide? (DCW?) technologies are carefully matched with advanced amplifier and electronics
circuitry. The low frequency response extends down to 55 Hz (-3 dB) while distortion is extremely
low due to a uniquely new rear reflex port design.
The 8130A has been specially designed to have a sufficient LF extension for most situations.
However if greater SPL's and a lower cutoff frequency are required, it can be complemented
with Genelec 7050B subwoofer.
The 8130A is very easy to set up and use, the only connections required are the mains supply
and the input signal. The female XLR input connector can be fed with either AES/EBU formatted
digital signal or analog line level audio signal. The Genelec 8130A automatically detects analog or
digital signals and directs them to the correct signal paths.
Technical Specifications
Input word length 16 - 24 bits
Input format AES/EBU
Digital input XLR female
Connector type
Input Sampling rate
No de-emphasis 29 - 200 kHz
Input Sampling rate
Using de-emphasis
Peak per pair with music material 108 dB SPL @ 1m
Drivers
Bass 5" magnetically shielded
Midrange -
Treble 3/4" metal dome, magnetically shielded
Crossover frequencies 3 kHz
Free field frequency
response 58 Hz - 20 kHz (± 2 dB)
Amplifier power /ch
Bass 40 W
Midrange -
Treble 40 W
Speaker dimensions (H x W x D)
mm 285 x 189 x 178 mm (Height with Iso-Pod? 299 mm)
inches 11 1/4 x 7 7/16 x 7 1/16" (Height with Iso-Pod? 11 13/16“)
Amplifier dimensions* (H x W x D)
mm Integrated in the speaker cabinet
inches
Speaker weight 5.6 kg (12.3 lb)
|
PRICE PER UNIT
S2X
The S2X brings together the virtues of the ʽclassicalʼ 7” woofer and tweeter combination by using ADAM innovative technologies and top-class materials.
The HexaCone 7” woofer is driven by a sophisticated magnet system with a 2” voice coil creating a greater linear excursion. This produces more dynamics than one would assume in a monitor of such small proportions. As a result, in addition to the unsurpassed audio quality of the X-ART and A/B amplifier combination, this monitor surprises the listener with a very powerful, deep, but always tight and precise low end.
Review at a glance: "Sonic sensation“
“The ADAM Audio S2X can convince in all areas, concerning the sound as well as the workmanship, and are worth every Euro. […] a no-compromise tool for all who mean serious business, whether in music or postproductions.” (www.96kHz.de, 03/2010)
“We started off with a classical string quartet recording and let´s just say right away that the S2Xs floored us. Several adjectives spring to mind [...] - wide open, transparent, effortless, breathtaking realistic, loud, dynamic, involving... [...] If you close your eyes and continue listening, the S2Xs seem to ‚disappearʽ almost entirely. [...] you gradually become less aware that you´re listening to speakers because they´re like an open window on the music itself. [...] Result: These monitors are up there with the best we´ve tried so far.” (MusicTech, 01/2010)
Woofer |
| Number | 1 | Basket Ø | 7.5" (186 mm) | Voice coil Ø | 2" (50 mm) | Cone material | HexaCone | Tweeter |
| Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers |
| Woofer | 1 | Type | PWM | Amp. power RMS / music | 250 W / 350 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 100 W | Control panel |
| Input Sensitivity (coarse) | -20 to +8 dB (4 dB steps) | Input Sensitivity (fine) | -1.5 to +2 dB (0.5 dB steps) | EQ 80 Hz | 0 to +6 dB (1 dB steps) | High Shelf EQ > 6 kHz | ±4 dB (1 dB steps) | Low Shelf EQ | ±4 dB (1 dB steps) | Tweeter gain | ±2 dB (0.5 dB steps) | Input connectors |
| Analog | XLR | Digital (optional) | AES/EBU / SPDIF / word clock | General data |
| Panel | Front | Frequency response | 35 Hz - 50 kHz | THD > 80 Hz | ≤0.8 % | Long term output | ≥110 dB | Max. peak | ≥120 dB | Crossover frequencies | 2200 Hz | Input impedance | 10 KOhm | Weight | 23.8 lb (10,8 kg) | Magnetically shielded | Optional | Height x Width x Depth | 14.5" (370 mm) x 8.5" (220 mm) x 12.5" (320 mm) | Warranty | 5 Years | Delivery contents |
Power cord, Manual
|
|
The compact LSR6325P-1 provides exceptional performance for use in applications
where accuracy is a must, but space is limited. With a 5.25 in. high-excursion woofer,
a damped titanium composite tweeter, and 150 Watts of amplification, it outperforms
many larger systems. When used with the LSR6312SP Subwoofer, the LSR6325P-1
is the heart of an exceptionally accurate yet space efficient full-range system.
Features:
High-performance bi-amplified design with patented JBL transducer technology.
Front panel volume and power controls.
Integrated mounting points for horizontal and vertical suspension.
Titanium composite high frequency device with elliptical oblate spheroidal waveguide.
Shielded for use next to video monitors.
Built in high-pass filtering for use with optional subwoofer.
User selectable workstation boundary compensation.
Powered monitors with 5.25" woofers and 1" titanium composite dome tweeters
100 watts power for low frequencies, 50 watts for highs
Cast aluminum enclosure for structural rigidity and light weight
Magnetically shielded for interference-free use near CRTs and other electronic gear
Linear Spatial Reference technology ensures even frequency response at the mix position
| M-Audio BX8 D3 Features:
- 150W active studio monitor with 8" military-grade Kevlar low-frequency driver and 1.25" silk dome tweeter
- Bi-amplified design delivers a sound that's both powerful and precise
- Custom waveguide ensures accurate dispersion for an incredibly tight soundstage
- Optimized rear-mounted port produces defined low-end response with bass extension down to 37Hz
- Acoustic Space Control tailors your monitor to your mix space
- Volume control for dialing in the perfect playback level
- Balanced combo input allows for flexible installation
- Front-panel LED shines brightly when the speaker is positioned at an ideal angle
M Audio BX8 D3 8 Inch Powered Studio Monitor Specifications
- Frequency Range: 37Hz – 22kHz
- Crossover: 2.0kHz
- Maximum Peak Input Level: -2dBU
- Input Types: Balanced 20kO XLR, and TRS
- Unbalanced: 10kO TS
- Input Sensitivity: -12dBU
- HF Driver Size: 31.8 mm (1.25“)
- LF Driver Size: 203 mm (8“)
- Amplifier Power: 150W Class A/B
- HF Driver Power Amp: 70W
- LF Driver Power Amp: 80W
- Port: Rear internally flared
- Controls: Yes
- Magnetic Shielding: Yes
- AC Input Voltage: 100–120V, 50/60 Hz 220–240V, 50/60 Hz
- Enclosure Construction: MDF
- Enclosure Finish: Black PVC
- Baffle Construction: Injection-molded ABS
- Baffle Finish: Matte black with Soft-touch
- Dimensions (HxWxD): 384 mm x 250mm x 302mm (15.1” x 9.8” x 11.9”)
- Weight: 10.5 kgs (23.1 lbs)
- Display Carton (HxWxD): 398mm x 345mm x 482mm (15.6” x 13.5” x 18.9”)
- Shipping Carton (HxWxD): 412mm x 359mm x 502mm (16.2” x 14” x 19.68”)
- Shipping Weight: 12.8kgs (28.22lbs)
- Configuration: 2-Way bi-amp
- System Type: Active Monitor
- Fuse Rating: 220–240V~ T1AL, 250V 100–120V~ T2AL, 250V
- Power Consumption: 150W
- Shape: Bass-reflex
|
MYTHO 8 is a two-way reference studio monitor equipped with two separate AB amplifiers - 200 W for the low frequencies and 100 W for the high - unparalleled for low distortion and natural sound. It features a high quality large metal dome tweeter for the best vocal reproduction and a 8” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.
The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. Thanks to the deeper low frequencies reproduced by its 8” woofer, the MYTHO 8 is perfect for medium to large control rooms.
A dedicated high quality DSP is provided on board. The cabinet is made in aluminium, internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
Acoustical Specifications |
---|
Frequency Response -3 dB: | 35 Hz | ÷ 20 kHz | Max SPL: | 116 dB | | Horizontal coverage angle: | 110° | | Vertical coverage angle: | 70° | | Compression Driver: | 1" neo, metal dome | | Woofer: | 8" neo, ICC technology | |
INPUT/OUTPUT SECTION |
---|
Input connectors: | combo XLR/Jack | | Input sensitivity: | -6/+6 dBu | |
PROCESSOR SECTION |
---|
Crossover frequencies: | 1800 Hz | | Protections: | thermal, excurs., rms | | Limiter: | soft limiter | | Controls: | bass tilt, roll-off, treeble tilt, desktop, DSP controlled | |
AMPLIFIER SPECIFICATIONS |
---|
High frequencies: | 100 Watts | | Low frequencies: | 200 Watts | | Cooling: | convection | | Connections: | vde | |
CABINET |
---|
Cabinet Material: | die cast aluminum | | Hardware: | orientation adjustable stand | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 430/17 mm/inch | | Width: | 310/12.2 mm/inch | | Depth: | 300/11.8 mm/inch | | Net Weight: | 16.150/35.60 Kg/Lbs |
|
Reviews
There are no reviews yet.