| Content |
The NX M12-A is a compact, lightweight two-way multipurpose loudspeaker system designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA.
It is equipped with a new 750 Watt Digipro digital amplifier and premium transducers components.
The low frequency section is a 12” woofer with a 1.75” voice coil diaphragm while the high section is a neodymium compression driver mounted to a constant directivity horn.
| Features |
|---|
| 750 Watt Digipro digital amplifier | | 130 dB max spl | | 90 x 40, Wide dispersion constant directivity angle, rotatable horn | | 12" woofer, high power neodymium 3" voice coil | | 1" HF driver, titanium dome, neodymium 1.75" voice coil | | PFC power factor correction |
| Acoustical Specifications |
|---|
| Frequency Response -3 dB: | 50 Hz | ÷ 20 kHz | | Max SPL: | 130 dB | | | Horizontal coverage angle: | 90° | | | Vertical coverage angle: | 40° | | | Compression Driver: | 1" neo, 1.75" v.c. | | | Woofer: | 12" neo, 3" v.c. | |
| INPUT/OUTPUT SECTION |
|---|
| Input signal: | ba l/ unbal | | | Input connectors: | Combo xlr-jack | | | Output connectors: | xlr | | | Input sensitivity: | -2 dBu / +4 dBu | |
| PROCESSOR SECTION |
|---|
| Crossover frequencies: | 1700 Hz | | | Protections: | Thermal, rms | | | Limiter: | Soft peak limiter | | | Controls: | Volume, side / floor, contour | |
| AMPLIFIER SPECIFICATIONS |
|---|
| Total power: | 750 Watts | | | High frequencies: | 250 Watts | | | Low frequencies: | 500 Watts | | | Cooling: | Convection / forced | | | Connections: | Powercon in / out | |
| CABINET |
|---|
| Cabinet Material: | Balitc birch | | | Hardware: | 6 x fly tracks | | | Handles: | 2 side | | | Pole Mount/Cap: | Yes | | | Colour: | Black | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 646 / 25.43 mm/inch | | | Width: | 385 / 15.15 mm/inch | | | Depth: | 375 / 14.76 mm/inch | | | Net Weight: | 21.2 / 46.73 Kg/Lbs |
|
StageSource™ is designed to be the worldʼs most versatile loudspeaker system for musicians. Using six powerful DSP-based Smart Speaker modes, the StageSource L3m output is optimized for a variety of performance scenarios including front-of-house PA, floor monitor, personal PA, keyboard backline, acoustic guitar backline, or with a multi-effects guitar processor as a high-performance electric guitar speaker system. Onboard accelerometer and pole mount sensors automatically detect the speakerʼs orientation and set the Smart Speaker mode accordingly.
The 1,400-watt, 3-way, tri-amped speaker system and a dual-braced tour-grade plywood enclosure combine to deliver astounding power and reliability. The innovative multi-function design enables the L3m to be the perfect loudspeaker in a wide variety of applications including floor or stage-stacked, pole-mounted, horizontal as a floor monitor, Virtual Tilt-back for instrument backline or flown with the integrated M10 suspension points for installation.
| Cabin Type: | Wooden, 3-way | | Monitor Use: | Yes | | Amplifier: | 1,400‐watt | | LF/MF, Woofer: | 2x10” | | HF, Horn: | 1” exit compression driver | | DSP Processor: | Yes | | Frequency Response: | 47 Hz to 18 kHz | | Dimensions: | 312 mmx861 mmx 312 mm | | Weight: | 26.1 kg | | Color: | Black |
|
- 1000w RMS, 2000w peak, power delivers clarity, punch and more than enough headroom for any
- performance or practice space
- Specially-voiced 12-inch woofer and high frequency compression driver deliver your drum sounds
- with precise, full response across the entire frequency range without any artificial colouration
- (2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator
- XLR output to link another Strike Amp 12 or send your performance to another input device
- Lightweight and flexible tilt-back cabinet design that can also be pole-mounted
- Contour EQ switch to control your sound
- Ground-Lift switch eliminates unwanted noise
Specifications:
- Output: Power 2000W (peak, 1300LF + 700HF), 1000W (continuous RMS, 650LF + 350HF)
- Low-Frequency: 12.0” (305mm) low-frequency driver, 3.0” (76mm) high-temperature voice coil
- High-Frequency: 1.4” (35mm) voice coil, neodymium-magnet high-frequency driver with precision waveguide
- Crossover Frequency: 2.0KHz
- Maximum SPL: 131dB (peak), 128dB (continuous) (dB-SPL @ 1m)
- Frequency Response: 53Hz – 20kHz (+3dB)
- Frequency Range: 46Hz – 22kHz (-10dB)
- Horn Coverage 90o horizontal x 60o vertical (nominal)
- Equalisation: Contour switch with low- and high-frequency +3dB boost
Connectors:
- (2) XLR/TRS 1/4” (6.35mm) combo inputs
- (1) XLR link output
- (1) IEC power cable input
- Controls Power switch, (2) volume control knobs (1 per input), EQ contour switch, ground-lift switch
- Indicators: (2) power LEDs (1 front-panel, 1 rear-panel), clip limiter LED
- Protection: Electronic clip, thermal & transducer overdrive
- Input Voltage: 100V~, 110–120V~, 220–240V~; 50/60Hz (switchable)
- Fuse: 100–120V T10AL AC250V 220–240V T5AL AC250V
- Consumption: 800W
- Enclosure: Trapezoidal, injection-molded polypropylene enclosure with perforated steel grille
Dimensions: (width x depth x height) 605 x 354 x 350mm
Weight: 16.3kg | LD Systems Stinger MON81AG2
The LD Stinger MON81AG2 is an especially compact active monitor with broad frequency response and a maximum sound-level pressure of 116dB for versatile use on stage.
The 8" coaxial speaker with an integral 1" HF driver attains a dispersion angle of 75°x75°, which is beneficial in multifaceted applications as a stage monitor. The coaxial configuration results in a very homogenous sound in the entire dispersion area plus very low susceptibility to feedback. The active monitor is driven by a Class AB power amplifier with an output power of 80W RMS; short-circuit protection and a limiter ensure dependable operation.
The signal is connected and looped through using an XLR/ jack combo socket and the XLR output. The rear connector panel is rounded out by a volume control, LED indicators, and the IEC power socket
The elegant bass-reflex housing made of 15mm multiplex is finished with a durable coating and has ergonomically milled handles and a metal grille to protect the speaker. The monitor angle is 35°.
Type: active
Woofer size: 8“
Woofer size: 203 mm
Woofer type: coaxial speaker
Woofer magnet: ferrite
Woofer brand: custom made
Woofer voice coil: 2
Woofer voice coil: 50.8 mm
HF driver size: 1“
HF driver size: 25.4 mm
HF driver magnet: ferrite
HF driver brand: custom made
HF driver voice coil: 1“
HF driver voice coil: 25.4 mm
Amplifier: Class A / B
Dispersion angle (H x V): 75° x 75°
Power output (RMS): 80 W
Power output (peak): 160 W
Frequency response: 90 Hz - 20 kHz
Crossover frequency: 2.400 Hz
SPL (1 W/1 m): 97 dB
Max. SPL (continuous): 111 dB
Max. SPL (peak): 116 dB
Protection: limiter, short-circuit
Controls: Volume, On / Off
Indicators: Power, Limit
Number of line inputs: 1
Line input connectors: XLR/ 6.3 mm jack (combo)
Number of line outputs: 1
Line output connectors: XLR
Power supply: transformer
Operating voltage: 230 V AC / 50-60 Hz
Cabinet material: 15 mm plywood
Cabinet type: bass reflex
Monitor angle: 35°
Width: 320 mm
Depth: 250 mm
Height: 361 mm
Features: Ergonomic insert handles |
The NX 12-SMA is equipped with new high power 700 W digital amplifier and a newly designed 12” coaxial neodymium transducer that guarantees outstanding audio quality and definition as well as an extremely lightweight of the final system.
The NX 12-SMA can be also used as a portable PA system, thanks to the rugged powder coated steel pole mount installed on the side. In order to control the response of the speaker in such different applications, RCF has incorporated two special Equalization Modes:
- Floor, for stage monitoring;
- Free Field, for the use of the speakers as a stand-alone PA system.
Cabinet is made in Baltic Birch plywood, finished with an extremely resistant paint for an extensive use on the road.
An ergonomic side handle, integrated with the input panel, is provided for an easier transport of the speaker
APPLICATIONS
- • Main vocal stage monitor
- • High-output drum or keyboard monitor
- • Main PA in small venues
General Specs
- 1400 Watt Peak, 700 Watt RMS digital bi-amplification
- 129 dB max spl
- 60° x 60° constant directivity horn
- 12" High power neodymium woofer, 2.5" voice coil
- 1.7 kapton dome, 1" exit, neodymium high frequency driver
- DSP processing, floor - fre field equalization, soft limiter and protection
- Combo xlr/jack input, xlr signal output
Acoustical Specs
- Frequency Response -3 dB:50Hz ÷ 20000 Hz
- Max SPL:129dB
- Horizontal coverage angle:60°
- Vertical coverage angle:60°
- Compression Driver:1.7 kapton dome, 1" exit, neodymium
- Woofer:12" neo high power woofer, 2.5" voice coil
Processor Section
- Limiter:Soft Limiter
- Controls:Freefield, floor
Amplifier Specifications
- Total power:1400W PEAK
- High frequencies:400 W PEAK
- Low frequencies:1000 W PEAK
- Total power:700W RMS
- High frequencies:200 W RMS
- Low frequencies:500 W RMS
Cabinet Specs
- Cabinet Material:Baltic Birch
- Handles:1 on side
- Pole Mount/Cap:yes
- Grille:steel
Size/Weight
- Height:324/12.7mm/inch
- Width:550/21.6mm/inch
- Depth:417/16.4mm/inch
- Net Weight:16,5/36.3kg/lbs
|
ST Series is a practical solution for high intelligibility speech and audio applications, covering infill or delay, production studios, presentations and high power music sound reinforcement with or without subwoofers. A key requirement for everyday audio systems, delivering simple ‘plug and play’ solutions, without compromising performance and portability.
Legendary RCF transducer technology coupled with state of the art digital amplification topology resulting in a perfectly optimised loudspeaker series. The ST Series provides high end audio coverage even at extreme sound pressure levels, unmatched reliability and acoustic compatibility across the whole series.
APPLICATIONS
- • Main vocal stage monitor
- • High-output drum or keyboard monitor
- • Sidefill monitor for small- to medium-scale applications
- • Rental companies
- • Professional musicians
General Specs
1200 Watt Peak, 600 Watt RMS
131 dB max SPL
45 Hz - 20 kHz frequency response
15" Woofer, 2.5" voice coil
1" Driver, 1.4" voice coil
Acoustical Specs
Frequency Response -3 dB: 45 Hz ÷ 20 Hz
Max SPL: 131 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 1“, 1.4" voice coil
Woofer: 15“, 2.5" voice coil
Inputs/Outputs
Input signal: bal/unbal
Input connectors: Jack-XLR male
Output connectors: XLR female
Processor Section
Crossover frequencies: 1400 Hz
Protections: RMS limiter, HF
Limiter: Fast limiter
Amplifier Specifications
Total power: 1200 W PEAK
High frequencies: 400 W PEAK
Low frequencies: 800 W PEAK
Total power: 600 W RMS
High frequencies: 200 W RMS
Low frequencies: 400 W RMS
Cabinet Specs
Cabinet Material: Baltic birch
Handles: 1 side
Pole Mount/Cap: Yes
Colour: Black
Size/Weight
Height: 362/14.25 mm/inch
Width: 673/26.49 mm/inch
Depth: 473/18.62 mm/inch
Net Weight: 20.7/45.63 kg/lbs |
Reviews
There are no reviews yet.