| Content |
NX DMX NX DMX is a USB powered 2 port DMX Node. As a member of the innovative ONYX platform from Obsidian Control Systems the NX DMX provides instant access to DMX In and Outputs as well as RDM communication. The device is plug and play and requires no drivers or additional configuration to integrate with ONYX. It is designed to work with any PC but also works with any ONYX console as a fast and affordable way to add two additional DMX ports.NX DMX supports ONYX on PC systems for up to four Universes without any dedicated license. When connected to an ONYX licensed PC or ONYX console the NX DMX is assignable to any one of 255 Universes.NX DMX allows for the full ONYX system to be used in many situations, from small events and tradeshows to clubs and churches. Many technicians utilize ONYX through the NX DMX as an affordable but powerful test station due to ONYX\' outstanding library support.
CONNECTION
2x DMX / RDM Universe In/Out: 5pin locking XLR USB In: USB 2.0 B
SPECIFICATION
Physical - Weight: 245g (0.6 lbs.)
- Length: 92 mm (3.7 in.)
- Width: 82 mm (3.3 in.)
- Height: 41mm (1.7 in.)
Electrical
- 5V over USB
- 100-240V nominal, 50/60 Hz
- Maximum current: 300 mA
|
The Eurolite USB-DMX 512 interface combines very small dimensions with many functions due to the internal RISC-controller. This controller creates all DMX-signals so that the pc and the USB-port is not too busy enabling the parallel use of several DMX-universes.
Eurolite USB-DMX 512 Interface features:
- USB-DMX-Interface
- Interface between notebook or pc and DMX-devices
- Tested with the following DMX lighting control software: DMX-Configurator, FreeStyler, DMXControl
- Recommended system requirements: min. Pentium 3 processor 1GHz, 128 MB RAM
- Tested operating systems: Windows XP Home, Windows XP Professional, Windows Vista, Windows7
- Power supply: 5 V DC, 500 mA via USB
- Input: USB 1.1 / USB 2.0
- DMX-output: 512 channels
- DMX-512-connection: 3-pin XLR
|
Work C 72 DMX
CD 72 DMX is a DMX to Analog signal converter suitable for 72 analog channels.
It converts DMX and MIDI signals into analog signals. It allows using an analog dimmer with DMX consoles, setting parameters like DMX start address channel, MIDI note selection, etc.
It also works as a chaser with adjustable speed to record and program scenes from a DMX console. With its Hold function, it provides memory against current failures that maintain the last DMX configuration.
C 72 DMX sends analog signals through SUB-25 connectors. Their input voltage can be set (from DC +10V, DC +15V or DC +20V) with DIP switches. Polarity can be switched too.
DMX to analog signal converter.
Adjustable voltage level for outputs (DC 10, 15, 20 V).
Voltage polarity selector.
72 channel chaser operating mode.
Programmable DMX start address channel.
Programmable chase speed.
Memory against current failures.
Main supply: 230 V AC 50 Hz.
Dimensions (WxHxD): 483 x 44 x 120 mm.
Weight: 2.3 kg.
|
- 2 x DMX512 universes in live mode (computer / tablet) and standalone mode
- Expandable from two to four DMX512 universes (2048 DMX channels)
- Intuitive illuminated keypad with 10 buttons for direct scene recall
- 99 Scenes on 5 zones
- USB and Ethernet for programming / control
- 16 Dry contact ports via HE20 connectors
- User-friendly, intuitive Cameo DMX software "by Daslight", free download for Windows and Mac OS X available
- Advanced triggering options (TCA)
- Smart upgrade technology (SUT)
- Live operation: 1024 channels
- Standalone operation: 1024 channels
- Software mode: Cameo D 4 / Daslight DVC 4 (fully supported)
- Operating systems: Android, iOS, Mac OS, Windows
- Inputs: Ethernet, USB-C
- Outputs: Ethernet
- Memory: microSD, SDHC (32 GB max)
- Power supply: 5 - 5.5 V DC 0.6 A
- IP protection type: IP20
- Dimensions (W x H x D): 160 x 90 x 45 mm
- Weight: 0.3 kg
- Colour: Grey
|
- USB interface with 512 DMX channels in live mode
- Integrated flash memory for 256 DMX channels in stand-alone mode
- User-friendly, intuitive Cameo DMX software "by Daslight” for Windows and Max OS X available to download free
- Internet connection required for hardware registration and software activation
- Standalone mode upgradable to 512 DMX channels
- Over 15,000 device libraries and a built-in ScanLibrary editor for creating and editing your own device profiles
- Powerful XEEL engine for hundreds of impressive pixel and video effects and movements for moving heads and scanners
- Touchscreen control plus remote control of essential features via iOS and Android smartphones and tablets or MIDI controller
- Audio analyser and MIDI clock for synchronising lightshow and music speed
- Real-time programming and 3D visualisation of lightshow
- Compatible with Light Raider app on Android devices via USB (free 30-day trial version available for download)
DMX-compatible light units can be conveniently operated via PC and Mac with the Cameo DVC Interface and associated Cameo software powered by Daslight. Used in live mode, the plug-and-play interface provides 512 DMX channels. When used in standalone mode without a computer it offers 256 channels and programmed lightshows can be copied to the integrated Flash memory. The interface features a mini USB port for input, a 3-channel DMX output and is supplied with power via a computer’s USB output. Three buttons facilitate programme selection and dimming in standalone mode. This requires a standard retail 5 V USB power adapter.
The free Cameo software package contains over 15,000 device libraries and a ScanLibrary editor for creating and editing your own device profiles. Individual DMX devices can be selected, placed in groups and added to a 2D view of the lightshow. Dynamic scenes can be created, arranged and placed over each other. The palette feature facilitates light control without fader movements, and the XEEL engine creates hundreds of wide-ranging, exciting effects.
The software includes a comprehensive toolbox for live editing, an audio analyser, a MIDI clock for synchronising light and music speed, and 3D visualisation of the programmed lightshow in real time. The screen layout is fully customisable to individual needs and the free Easy Remote app facilitates remote control by iPhone, iPad and Android devices via Wi-Fi.
After successful registration at https://store.dmxsoft.com/, hardware and software upgrades (fees may apply) are available. These include upgrades for the standalone and live channels, as well as temporary and unlimited licences from Light Rider, and much more.
The DVC interface and free software have been specially developed for Cameo by Daslight. Please refer technical queries to SUPPORT@DASLIGHT.COM.
Product type
USB to DMX Interface
Live channels
512
Stand Alone channels
256 (upgradeable to 512)
Software Mode
full Cameo D4 / full Daslight D4
Inputs
Mini USB
Outputs
XLR 3-pin female
Memory
64 K
Dry contact ports
8
Operating voltage
5 V USB bus powered
Width
78 mm
Height
27 mm
Depth
88 mm
Accessories (included)
USB to Mini USB cable
Weight
0,193 kg | Standalone DMX Controller
- No computer required
- Compatible with any DMX device
- Up to 4 DMX universes (2048 channels, add-on required for U3+4)
- Up to 680 fixtures and beams
- Up to 50 fixture types
- Up to 5000 fixture properties (colour/gobo etc...)
- 8 Fixture groups
- 6 Projects
- 15000+ available fixtures (3500+ on the controller)
- DMX address
- Fixture order and group settings
- Use as DMX splitter with DMX universe mapping
- Colour FX module with 8 effect types and 16 definable colours
- Move FX module with 8 effect types
- Beam FX module with 8 effect types
- 6 Flash buttons for controlling Special FX, Strobe, Blinder, Speed, Blackout and Smoke
- Static colour palette with 10 user-defined colours per group and gradient control
- Static position palette with 5 user-defined positions per group with fade and fanning
- Gobo palette with 5 user-definable gobos per group
- 20 Nameable live edit buttons with flash trigger mode and 'park' function
- 100 Nameable presets for storing snapshots with hold and fade timings
- Preset playback cue list - all presets or per page of 20 presets
- Group and master dimming with encoder acceleration
- Group FLASH
- FULL and Blackout
- 16-Bit pan/tilt control:multi-beam LED bar control
- FX music pulse synchronisation from microphone or line-in
- FX BPM sync with Ableton Link
- OS2L or BPM Tap effect speed
- Phase, sequence, size, fade, fan and flick
- Live control of Move FX registration point
- Global FX speed and freeze control
- Map DMX IN with group dimmer and patch to output channels (add-on required)
- WLINK sync with another Wolfmix controller (add-on required)
- Fixture Builder
- Fixture calibration tool to limit the range of moving fixtures
- X-Y touch controlled positioning grid
- RGBW touch controlled colour picker
- 8-Step real-time sequencer to create beam and move FX
- Live view of DMX levels with override of default values and DMX channel tester
- Beam editor for overriding min and max values for created effects
- Calibration and RGB, white, amber, UV mixing with automatic translation of fixed colour wheel
- Automatic matching of similar gobos across different fixture types
- Time-controlled triggering of flash and preset buttons
- Fixture FLIP function for beam order reversal
- Fixture SPLIT function for splitting multi-FX bars
- Project and fixture backup with the WTOOLS app
- Offline 3D visualisation with Easy View & WTOOLS via USB (add-on required)
- Automatic restoration of the active project (no manual saving necessary)
- Import different fixture setups into the same project
Technical data:
- Housing: ABS plastic
- Powder-coated steel base plate with 100mm VESA
- Powder-coated, steel-reinforced back plate
- Screen: 4.3" colour TFT with tinted glass
- Capacitive touch
- Hardware: 220 Mhz CPU with ARM core, 8 MB RAM, 16 MB Flash
- Audio: Omnidirectional electret microphone
- 3.5 mm Jack line-in
- DMX: 2 x 3pin DMX OUT XLR connectors
- 1 x 5pin DMX OUT XLR connector
- 1 x 5pin DMX IN/OUT XLR connector with WLINK
- USB-B connector - 900ma required (USB3 rating)
- Dimensions (W x D x H): 195 x 220 x 62 mm
- Weight: 1070 g
|
Reviews
There are no reviews yet.