| Content | Large mid-range horn 2-way crossover Speaker input and parallel 6.3 mm jack input/output Flange for stand installation Strong protective grille for perfect protection Scratch-resistant plastic housing Compact speaker-system for car transport Ideal for live music or for permanent installation in party rooms | Professional Sound Tools for Musicians
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.
Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.
Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.
PREMIUM PR:O - PR:O 18 S
Description High-power-capacity 18" subwoofer with high-quality
Description crossover for powerful low-end kick
Power handling capacity RMS: 500 W
Power handling capacity Program: 1000 W
Frequency response within +/-3dB 48 Hz ? 150 Hz (internal wedge)
Frequency response @ -10dB 38 Hz ? 150 Hz (internal wedge)
Speaker 1 x 18“
Impedance 4 Ohm
Axial sensitivity 1w/1m half-space 104 dB
Maximum SPL 10% THD half-space 129 dB
Crossover frequency 150 Hz/12 db Octave
Connections 2x Speakon
Mounting collar DuoTilt? speaker-stand mounting collar for fast, easy
Mounting collar orientation of the speakers towards the audience
Dimensions (WxHxD) 53 cm x 61 cm x 64 cm
Dimensions (WxHxD) 20 3/4? x 24? x 25 1/4?
Weight 41.6 kg
Weight 91.52 lbs |
The SW10 STUDIO subwoofer has been designed specifically for optimum matching with the MSP series powered monitor speakers. Combined with MSP7 STUDIO or MSP5 STUDIO speakers in a stereo of surround system it can provide a seamlessly extended low end for accurate ultra wide range monitoring. A comprehensive selection of inputs and outputs as well as a phase switch and continuous high-cut and level controls make it easy to achieve optimum performance in any room and system. Whether you're simply mixing basic stereo programs or authoring DVD audio in full surround, MSP STUDIO series speakers plus an SW10 STUDIO will give you the ultimate monitoring experience.
GENERAL Type Powered Subwoofer
Crossover Frequency -
Overall Frequency Response 25Hz - 150Hz (-10dB)
Maximum Output Level 111dB, 1 m on Axis
Dimensions (W x H x D) 328 x 459 x 476 mm
Weight 26.5 kg
Magnetic Shielding Yes (Non-covered type)
SPEAKER SECTION Components LF 10" cone
HF -
Enclosure Type Bass-Reflex
Material MDF
AMPLIFIER SECTION Output Power * LF 180W
f = 100Hz, THD = 1%, RL = 8O
HF -
S/N, IHF-A filter > 100dB, LEVEL = Max
Input Sensitivity XLR-3-31 +4 dBu, LEVEL = Center
-6 dBu, LEVEL = Max
PHONE -
Input Connectors, Impedance XLR-3-31 (balanced), 10 kO
Output Connectors XLR-3-32 x 3 (balanced),
parallel connection with Input
Controls LEVEL control Center Click VR
(Min = -8 Attenuation)
LOW CUT switch -
HIGH TRIM -
LOW TRIM -
POWER SWITCH on/off
PHASE SWITCH Normal/Reverse
LPF control 40-120 Hz, 80 Hz at Center Click
Indicators LED Green: Power On
Red: Clipping
Power Consumption 160W
* These specifications apply to rated power supplies of 100, 120, 230 and 240 V.
* Specifications and appearance subject to change without notice.
|
EVID 12.1 EVID Series Premium Surface Mount Subwoofer
To augment and extend the low frequency response of any full-range models,
an attractive and powerful subwoofer completes the EVID line. The 12.1 provides
an easy installation by incorporating dual voice coils to handle both channels of
a stereo pair. In addition, the unit can power up to four satellites with its four
crossed-over audio outputs on the back panel. For extended bass performance
in demanding installations... EVID 12.1 Subwoofer.
Specifications
Max. SPL / 1m (calc); full space 125 dB
System Power Handling (continuous/program/peak) 175/350/700 Watts
Nominal Impedance 6 Ohms
Minimum Impedance 6 Ohms
Flying No
Frequency Response (-10dB) 40 - 140 Hz
Input Connections Spring Terminal
Internal Crossover Yes
Sensitivity 1W/1m 100 dB
Chassis Size 12 inches
Weight Net 18.1 kg ( 39.9 lbs )
Dimensions (HxWxD) 412 x 584 x 305 mm
(16.22" x 22.99" x 12.01")
|
Ηχείο SUB με 2 x 18 2042H drivers, 600W/4Ω. 40Hz-1kHz ±3dB parallel/discrete επιλεγόμενο. Ενσωματωμένο σύστημα ανάρτησης δεν περιλαμβάνεται. (1094H x 561W x 816D mm). 75kg. |
The SR-A18B is a sub-woofer system designed to be used in conjunction with the SR-A12L or SR-A12S Line array speaker. The SR-A18B employs the multi-amplifier drive system and is designed to be used in conjunction with the optional DP-0206 Digital Processor.
| Enclosure | Bass-reflex type | | Power Handling Capacity | Continuous program: 720 W | | Rated Impedance | 8 Ω | | Sensitivity | 95 dB (1 W, 1 m) | | Frequency Response | 40 - 400 Hz (when using DP-0206 (option)) | | Crossover Frequency | 80 Hz (when using DP-0206 (option)) | | Speaker Component | 46 cm cone-type | | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm
and Neutrik NL4MP × 2 | | Finish | Enclosure: Plywood, black, paint
Front grille: Punched steel plate, black, acrylic paint | | Dimensions | 740 (W) × 573 (H) × 698 (D) mm | | Weight | 66 kg (including accessories) | | Accessory | Joint plate …2, Joint plate mounting bolt (M10) …16 | | Option | Rigging frame: SR-RF12
Digital processor: DP-0206 |
|
Reviews
There are no reviews yet.