| Content |
- 3 zones with routing facility of all input channels as desired
- 5 input channels with recessed gain controls on the rear panel, signal LED and super smooth dual-rail channel faders
- 2 microphone channels with level control, LED level meter, 3-way equalizer and talkover button
- Talkover level and response time adjustable
- Pre-fader listening (CUE) to the stereo input channels via adjustable headphone output
- Color illuminated rotary controls and rubber buttons
- Zone outputs with level control, 3-way equalizer and 10-digit stereo LED level meter
- 2 record outputs (independent of the master channels) with routing facility of all zone outputs as desired
- Inputs: 8 x line (stereo RCA), 2x line/phono (stereo RCA), switchable; 2 x microphone (XLR/6.3 mm jack) and headphones (6.3 mm jack)
- Outputs: 3 x master (optionally 3-pin XLR or stereo RCA) and 2 x record (stereo RCA)
- Operation via supplied power unit
- Rack installation, 2 U
- Ideal for restaurants, bars, theme parks, hotels and all applications where microphones need to be mixed with music (e.g. karaoke)
| Power supply: |
230 V AC, 50 Hz ~, |
|
via supplied power unit |
| Power consumption: |
60 W |
| Inputs: |
|
| Microphone 1,2: |
combined XLR/6.3 mm jack (1/4“) (bal.) |
| Minimum input voltage: |
1 mV RMS |
| Line 1-8, Aux 1,2: |
stereo RCA |
| Minimum input voltage: |
150 mV RMS |
| Phono 1,2: |
stereo RCA |
| Minimum input voltage: |
3 mV RMS |
| Outputs: |
| Master 1-3: |
stereo RCA, stereo XLR |
| Output voltage: |
0.75 V/1.5 V RMS (switchable) |
| Record: |
stereo RCA |
| Output voltage: |
0.75 V RMS |
| Headphones: |
6.3 mm stereo jack (min. 8 ohms) |
| Tone control (microphone 1,2; zone 1-3): |
| 5x High: |
-12 dB to +12 dB/ 10 kHz |
| 5x Mid: |
-12 dB to +12 dB/ 1 kHz |
| 5x Low: |
-12 dB to +12 dB/ 100 Hz |
| Talkover attenuation: |
-15 dB |
| S/N ratio: |
>65 dB |
| Frequency range: |
20-20,000 Hz |
| Distortion: |
0.03 % |
| Dimensions (WxHxD): |
483 x 117 x 90 mm (19“, 2 U) |
| Weight: |
2.5 kg |
| * 6 Dual stereo inputs, 2 with mic inputs
* RIAA preamps for up to 4 turntables
* Input selectors with 2 colour indicators
* Smooth action level controls
* 2 Stereo aux sends with pre/post switching
* 4 band EQ - high definition of frequency bands, with ʽinfinite killʼ on HF and LF; wide Q for cut, narrow Q for boost
* MIDI output from VCF 1+2, crossfader, LFO 2 (MIDI clock), dedicated data control and start/stop button
* Large ʽlight-pipeʼ illuminated cue switches
* 9 led 3 colour channel ʽbulls eyeʼ LED meters
* Crossfader and Filter assign switches
* Either smooth travel 60mm VCA faders or rotary VCA faders (Linear or Rotary versions)
* Active Penny & Giles VCA crossfader allowing contour to be set from smooth to scratch mix
* Cue/Mix monitor balance control
* 2 Independent mix outputs
* 2 Rotary master level controls
* Dual stereo analogue VCF effects
* 3 Filter modes combine for more effects
* Independent frequency sweep controls
* Resonance control for subtle or wild effects
* Filter LFO Depth and tempo controls
* Illuminated Filter switches punch effect in or out
* Powerful headphones monitor with auto cue
* Headphones split cue and Aux 1 & 2 monitoring
* Stereo music only booth monitor output
* Booth mono and mute switching
* 9 led 3 colour main ʽbulls eyeʼ LED meters
* Balanced +4dBu XLR stereo Mix 1 output
* Impedance balanced Line stereo Mix 2 output
* Pre-fade recording output
Technical Data
Outputs:
2 Independent mix outputs
Mix 1:Balanced 0dBu XLR stereo Mix 1
Mix 2:Impedance balanced Line stereo Mix 2 output
Booth monitor: Stereo music only
MIDI output from VCF 1+2
2 Headphone (6,3 mm/ 3,5 mm) | Numark M6 USB 4-Channel USB DJ Mixer
- 4-Channel Club-Style Mixer
- Class Compliant USB Audio Interface
- LED Metering
- 3-Band EQ per Channel
- Microphone Channel with Dedicated EQ
- Replaceable Crossfader w/ Slope Control
- Mac and Windows Compatible
The black M6 USB from Numark is a four-channel DJ mixer well suited for clubs, professionals, and home enthusiasts. The integrated USB audio interface is class compliant and connects to either Mac or PC without the need for drivers. Play music from any optional DJ software and record the mix into any audio recording application.
The M6 features a 3-band EQ per channel, dedicated microphone input with EQ, and a replaceable crossfader with slope control. The master output offers balanced XLR and unbalanced RCA jacks, while booth and recording outputs are available via RCA connections. The M6 USB ships with a USB cable and a standard IEC power cord.
- Four input channels, each with gain, 3-band EQ, and LED metering
- USB computer connection for playing and recording with Mac or PC
- Play music from music-player software
- Record your mix to your computer
- Multiple phono, line, and mic inputs
- Dedicated XLR mic channel and additional mic input on channel 4
- Replaceable crossfader with slope control
- Assign any channel to either side of the crossfader
- Class Compliant: This product is immediately compatible with every current and future version of Mac OS X and iOS and with Windows (98SE and up) operating systems
| Inputs |
Line: 4 x stereo RCA
Phono: 2 x stereo RCA
Mic 1: XLR
Mic 2: 1/4" / 6.4 mm |
| Outputs |
Main: Stereo XLR / stereo RCA
Booth: Stereo RCA
Record: Stereo RCA
Headphone: 1/4" / 6.4 mm |
| USB Connection |
Type B |
| Line Input |
10 kOhms input impedance
77 mV RMS sensitivity for 1.22 V output |
| Mic Input |
600 ohms input impedance unbalanced
1.1 mV RMS sensitivity for 1.22 V output
60 mV RMS max input |
| Phono Input |
47 kOhms input impedance
1.3 mV RMS sensitivity at 1 kHz for 1.22 V output |
| Line Output |
6.7 V RMS maximum |
| Headphone Output |
0.5 W into 47 ohms |
| Distortion |
< 0.01% |
| Signal to Noise Ratio |
Signal to Noise Ratio (maximum output, JIS-A weighted):
Line: >96 dB
Mic: >94 dB
Phono: >79 dB |
| Frequency Response |
Line: 20 Hz to 20 kHz (± 0.5 dB)
Mic: 20 Hz to 15 kHz (± 0.5 dB)
Phono: ±1 dB (except for controlled attenuation of -3dB at 20 Hz to reduce rumble and feedback) |
| Ducking |
Microphone Talkover: -15 dB |
| Channel EQ |
Bass: +12/-32 dB at 60 Hz
Middle: +12/-32 dB at 1.2 kHz
Treble: +10/-28 dB at 15 kHz |
| Microphone EQ |
Bass: ±12 dB at 100 Hz
Middle: ±10 dB at 1.2 kHz
Treble: ±12 dB at 15 kHz |
| Power Consumption |
Typical: 9.1 W
With Full Headphone Output: 11.6 W |
| Dimensions (WxDxH) |
12.63 x 14.25 x 4.00" / 32.07 x 36.20 x 10.16 cm |
| Weight |
9.6 lb / 4.4 kg |
| Although the origins of the company date from 1965, ECLER presented its first mixer back in the 70s: the A4, a simple 4 channel mixer oriented to Super 8 film sound edition. The company grew in the 70s with the boom of disco and tourism.
The AC-4 was a high fidelity mixer designed to meet the most demanding sound requirements in discos, theatres, cinemas, recording studios, conference rooms... The electronic circuits and the extreme selection of all components and transistors used, made the AC-4 a professional high quality mixer.
The new AC-6 is a tribute to those old school, simple, robust, reliable and great sounding mixers. The AC6 enables a new generation of DJs to enjoy the unique sound of those legendary mixers. | • Master outputs with 3 way tone control
• Special front input for phone/mp3 devices
• Zone control for 3 balanced outputs
• 1 Mic, 7 Line, 2 Phono inputs
The IMIX-5.3 is a basic 3 zone control mixer. It has a logical design and all functions are very clear and easy to control. Each channel has 3 output buttons to route the channel to your desired area/zone. All outputs have their own EQ settings and with the PFL function you can monitor each area/zone with a pair of headphones. At the front it has direct inputs for microphone, line and a phone/mp3 device.
Specifications Input channels: 1 x Microphone, combo XLR/Jack
7 x Line, RCA
2 x Phono, RCA
1 x Phone, 3,5mm jack
Output channels: 3 x Master (Balanced), XLR/RCA
1 x Headphones, 6.3mm Jack
Master EQ: 100Hz, 1KHz, 10KHz, -12dB / +12dB
Mic EQ: 100Hz, 1KHz, 10KHz, -12dB / +12dB
Frequency response: 20Hz – 20Khz
T.H.D.: |
- 5 input channels with gain control, 3-band equalizer, cue button and super-smooth channel fader
- 1 DJ microphone channel with talkover selector and 2-band equalizer
- Pre-fader listening to all stereo input channels and the master output via adjustable stereo headphones output
- Replaceable crossfader for crossfading between input channels with assignment switches
- 10-digit stereo LED level meter, master level control, and balance level control
- Adjustable zone output, and record output, independent of the master
- Inputs: 6x line (stereo RCA), 2x phono/line (stereo RCA), switchable; 2x microphone (6.3 mm jack), 1x microphone (XLR/6.3 mm jack) and headphones (6.3 mm jack)
- Outputs: master (3-pin XLR, stereo RCA), zone and record (both stereo RCA)
- Operation via supplied power unit
- Rack installation, 4 U
| Power supply: |
230 V AC, 50 Hz ~, |
|
via supplied power unit |
| Power consumption: |
30 W |
| Inputs: |
| DJ MIC (front): |
combined XLR (3-pin)/ 6.3 mm jack (1/4“) (bal.) |
| MIC 1,2 (rear): |
6.3 mm jack (1/4“) (bal.) |
| Impedance: |
1 kohms |
| Minimum input voltage: |
1.5 mV RMS |
| LINE 1-5: |
stereo RCA |
| Impedance: |
27 kohms |
| Minimum input voltage: |
150 mV RMS |
| PHONO 1,2: |
stereo RCA |
| Impedance: |
47 kohms |
| Minimum input voltage: |
3 mV RMS |
| Outputs: |
| MASTER: |
stereo RCA, stereo XLR (3-pin) |
| ZONE: |
stereo RCA |
| Impedance: |
400 ohms |
| Output voltage: |
1 V RMS/ 0 dB |
| REC: |
stereo RCA |
| Impedance: |
5 kohms |
| Output voltage: |
225 mV RMS |
| Headphones: |
6.3 mm stereo jack (min. 16 ohms) |
| Tone control (DJ MIC): |
| 1x High: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| 1x Low: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| Tone control (channels 1-5): |
| 5x High: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| 5x Mid: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| 5x Low: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| S/N ratio: |
>80 dB |
| Frequency range: |
20-20,000 Hz |
| Distortion: |
0.02% |
| Dimensions (WxHxD): |
483 x 179 x 94 mm (19“, 4 U) |
| Weight: |
4 kg |
|
Reviews
There are no reviews yet.