OMNITRONIC LH-055 PASSIVE DI BOX

43.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: LH055 Category:
 1-channel DI box, passive Converts unbalanced 6.3 mm jack line input (e.g. from instruments) into balanced XLR output for connecting a mixer Switchable input attenuation: 0 dB, -20 dB, -40 dB Ground-lift switch eliminates ground loop problems 1 signal input (6.3 mm jack) 1 parallel output (6.3 mm jack), feed-through of the input signal 1 […]

 

Read more

 1-channel DI box, passive Converts unbalanced 6.3 mm jack line input (e.g. from instruments) into balanced XLR output for connecting a mixer Switchable input attenuation: 0 dB, -20 dB, -40 dB Ground-lift switch eliminates ground loop problems 1 signal input (6.3 mm jack) 1 parallel output (6.3 mm jack), feed-through of the input signal 1 low-impedance output (XLR) Gray housing

Weight 0.70 kg

Reviews

There are no reviews yet.

Be the first to review “OMNITRONIC LH-055 PASSIVE DI BOX”

Your email address will not be published. Required fields are marked *

Quick Comparison

OMNITRONIC LH-055 PASSIVE DI BOX removeSTEWART ADB1 ACTIVE D.I BOX removeARX DI-PLUS 2 STEREO ACTIVE D.I BOX removeBEHRINGER DI-600P High-Performance Passive Direct Injection Box removeLD SYSTEMS LDI02-ACTIVE D.I BOX w-BATTERY removePALMER AUDIO PAN04 TOOLS Passive DI Box - 2 channels remove
NameOMNITRONIC LH-055 PASSIVE DI BOX removeSTEWART ADB1 ACTIVE D.I BOX removeARX DI-PLUS 2 STEREO ACTIVE D.I BOX removeBEHRINGER DI-600P High-Performance Passive Direct Injection Box removeLD SYSTEMS LDI02-ACTIVE D.I BOX w-BATTERY removePALMER AUDIO PAN04 TOOLS Passive DI Box - 2 channels remove
Image
SKULH055ADB1EDI-PLUS 2E005866LDI02PAN04
Rating
Price 43.00 incl. GR VAT 164.56 incl. GR VAT 203.11 incl. GR VAT 39.00 incl. GR VAT 58.64 incl. GR VAT 93.00 incl. GR VAT
Stock

In stock

Available on backorder

In stock

In stock

Only 5 left in stock

Available on backorder

AvailabilityIn stockAvailable on backorderIn stockIn stockOnly 5 left in stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

 1-channel DI box, passive Converts unbalanced 6.3 mm jack line input (e.g. from instruments) into balanced XLR output for connecting a mixer Switchable input attenuation: 0 dB, -20 dB, -40 dB Ground-lift switch eliminates ground loop problems 1 signal input (6.3 mm jack) 1 parallel output (6.3 mm jack), feed-through of the input signal 1 low-impedance output (XLR) Gray housing

The Stewart ADB-1 is a single channel active direct box that allows an unbalanced source to
directly feed a balanced input. Musical instruments, tape recorders, VCRs and sound projectors
can be run "direct" to the mixing console, avoiding unnecessary degradation of sound quality.
The ADB-1 operates on either phantom power or a 9-volt battery.

FEATURES:
Flat response
Low distortion
Low noise
Wide dynamic range
No transformer
RF protection on input and output
Switchable ground isolation
Flush mounted slide switches

Phantom or battery powered in a rugged steel chassis
 
The ARX DI-PLUS 2 represents another major step forward in active direct boxes. Packaged in
a single channel stand-alone format, the DI-PLUS 2 represents a fresh look at active stereo
D.I. concepts.

Precision engineered
Ultra quiet, ultra clean circuitry delivers maximum headroom whatever the signal. Premium grade
components, plus an all-steel chassis gives excellent hum and noise specifications and superb
audio quality in a tough, roadworthy package. Accurate Left and Right channel level matching keeps
the stereo image centred.

Level control
The DI-PLUS 2 features two high impedance unbalanced inputs on the front panel, running to balanced
XLR outputs on the rear. A a global Pad switch drops inputs by 20dB, making it suitable for all applications
from the softest keyboard to the hottest broadcast levels.
 
Battery compartment
The revolutionary simple 'clamshell' action of the DI-PLUS 2 battery compartment makes battery changing
extremely easy, even on the darkest stages.
A 9v alkaline battery snaps into a PCB mounted battery holder for fast, secure location. No fragile battery clip
leads to break, no tools required, no screws to lose. Production crew heaven!
 
Automatic Phantom switching
The DI-PLUS 2 will automatically switch itself to the console's own Phantom Power, if available, and an LED
will indicate this mode. Turn the Phantom Power off and it will instantly revert back to battery mode.

Rugged all-steel case
A lot of direct boxes are fitted into brittle cast alloy cases. Not this one! The tough all-steel inner and outer
chassis of the DI-PLUS 2 provide excellent RF/EMF shielding while making it a sturdy, heavy duty unit that
is hard to dislodge, and hard to leave behind.
 
Rear panel showing Left and Right XLR connectors, ground lift switch, battery check switch and LED, plus
phantom power On LED and captive screw for opening up the unit for battery changing
 
Whether you're a Studio or Live Sound engineer, installation contractor, or broadcast engineer, you want all
the dynamics,clarity and stereo information of the original sound source transferred to the mixing console.
The ARX DI-PLUS 2 provides a rugged, no-compromise solution to all stereo direct injection and signal
balancing requirements.
 
T E C H N I C A L S P E C I F I C A T I O N S:
Max Input Level
+12 dB Phantom powered
+6 dB Battery powered
Input Impedance 1 Meg Ohm
Max Output Level
+17 dB 10K Ohm load Phantom powered
+12 dB 10K Ohm load Battery powered
+11 dB 600 Ohm load Phantom powered
+12 dB 600 Ohm load Battery powered
Output Impedance 680 Ohms Balanced
Output Signal to Noise
-100 dB unweighted
-104 dB A weighted
Dynamic Range
117 dB 10K Ohm load Phantom powered
112 dB 10K Ohm load Battery powered
111 dB 600 Ohm load Phantom powered
107.5 dB 600 Ohm load Battery powered
Distortion 100 Hz .0018%, 1KHz .0028%, 10KHz .0056%
Frequency Response 20Hz to 20KHz, ± 0.2 dB
Gain through Unit: 6dB (Pad switch out)
Pad Switch: Global -20 dB attenuation
Input and Loop Out Connectors
Insulated jacks (!!!Note that Channel A Input connector switches the unit on
when a plug is inserted. Remove plug when storing to avoid battery drain!!!)
Output Connectors
3 pin XLR. Wired Pin 1 Ground, Pin 2 + Hot, Pin 3 - Cold.
Global Audio Ground (Pin 1) lift switch
Construction
All-steel chassis, fibreglass PCB
Battery Access
Twist connector opens chassis, snap-in battery holder inside.
No tools required

Behringer DI-600P High-Performance Passive Direct Injection Box Introducing the Ultra-Compact DI-Boxes from BEHRINGER There are times when you will want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. A direct connection between audio equipment can be a challenge though: technical problems crop up that?ll corrupt the signal. The DI600P lets you connect instruments or amplifier outputs of up to 3,000 Watts. It converts any unbalanced signal to a balanced signal and eliminates unwanted noise. With its high-performance transformer, it also allows you to use very long cables without the loss of high frequencies. This is the sort of medicine that?ll cure headaches in your studio or on stage. It often happens that you want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. The direct connection between audio equipment can quickly turn out to be a real challenge: technical problems crop up that can affect the signal. Hook Your Guitar or Amp Up to the PA Be ready for your next gig with the Behringer Ultra-DI DI600P direct box. Designed to send instrument or amplifier signals to the main mixing board, the DI600P is a high-performance passive DI is a useful tool in any gig rig or studio. Dual 1/4" TS jacks are wired in parallel let you plug your instrument into one and use the other as an output to your amp. The balanced XLR mic-level output feeds your mixer a clean and super-flat signal that is true to the source. Sweetwater knows that grounding issues and hum can be a problem at live gigs. The DI600P sports a ground lift switch to kill unwanted ground loops and hum. It also has a filter switch for optimal guitar tone and an instrument/amp switch with a 30dB input level drop. The Behringer Ultra-DI DI600P direct box is an extremely useful tool for any stage rig! Behringer Ultra-DI DI600P Direct Box Features:
  • Compact, high-performance passive direct box
  • Jack input 1/4" TS in and parallel out
  • Gold-plated XLR output / impedance balanced
  • Super-flat frequency output for uncolored sound
  • Switchable filter that optimizes the DI for guitars
  • Instrument/Amp switch lowers the input level 30dB for feeding amplifiers into the DI
  • Instruments or amplifier outputs with up to 3,000 watts can be connected directly
  • Offers impedance and signal matching of instruments to mixers
  • Perfect for stage and studio use
  • Ground lift switch eliminates typical ground loop problems
  • Rugged metal case can take the rigors of the road
Get your signal to the board with Behringer\'s Ultra-DI DI600P direct box! Tech Specs
  • Type: Passive DI Box
  • Channels: 1
  • Ground Lift: Yes
  • Inputs: 1 x 1/4"
  • Outputs: 1 x 1/4“, 1 x XLR
  • Height: 1.4"
  • Width: 3.75"
  • Depth: 5"
  • Weight: 0.66 lbs.
  • Manufacturer Part Number: DI600P
pdf User´s Manual LD Systems LDI02 DI Box active Active DI box in a sturdy metal housing (aluminium/steel) with protective corners, silver-blue metallic, internal battery (9 V flashes during operation) is switched off automatically when phantom power is used (LED permanently illuminated), extremely low battery consumption. Battery: 9 V block (not included). Product type DI Boxes
Channels 1
Inputs 2
Input connectors 6.3 mm Jack , XLR
Max. input level + 10 / + 30 dBu dBu
Input impedance 1 M Ohm(s)
Outputs 1
THRU outputs/channel 1
Output connectors XLR
Frequency response 20 - 20.000 Hz
THD
Indicators Power
Controls ground lift , Power
Operating voltage +48 V phantom power , 9 V block
Cabinet material metal
Cabinet surface painted
Width 135 mm
Depth 128 mm
Height 53 mm
Weight 0,645 kg
2-channel passive DI box for line and loudspeaker levels. PAN-04 consists of a housing containing the equivalent of two PAN-01s, making it a dual channel passive DI box. This „stereo" configuration makes it ideally suited for use with certain keyboards and devices which have several outputs.ive DI box. Jack input with paralell „THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals. Specifications
  • No. of channels: 2
  • Passive/Actibe: Passive
  • Transformer balanced: Yes
  • Attenuator: -30 dB
  • Input/Output Gain: -20 dB
  • Ground lift switch: Yes
  • Max Input Level: +54 dBu
  • Max Output Level: +4 dBu
  • Frequency Range  2K Source Imp. -1dB: 10 Hz - 40 kHz
  • Input Impedance  60Hz: 60 kΩ
  • Nom. Output Impedance: 600 Ω
  • Housing: Steel
  • Dimension: 110 x 110 x 45 mm
Weight0.70 kg0.50 kg0.60 kg0.30 kg0.70 kg0.47 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.70 kg
Weight 0.50 kg
Weight 0.60 kg
Weight 0.30 kg
Weight 0.70 kg
Weight 0.47 kg